Reison MEDICAL 10-304 User manual

1
Radial clamp 10-304 including versions
Version
Description
Pole type
10-304
Radial clamp (EU 25x10 mm rail) with V-stud
Ø 16-20 mm
10-304-P
Radial clamp (EU 25x10 mm rail) with Plane stud
Ø 16-20 mm
Warning! This symbol indicates important information related to safety. Follow these
instructions carefully.
Read User Manual before use! It is important to fully understand the content of the user
manual before attempting to use the equipment.
2021-04-19
Dokument nummer: M10-304EN rev.01
Radial clamp 10-304
ENGLISH

2
Intended use
Clamp intended to attach and position accessories, with a pole size Ø 16-20 mm, to the accessory rail
on operating and examination tables. The product is to be used by medical professionals within a
medical facility.
Safety regulation
Maximum load: 25 kg, according to EN 60601-1 and EN 60601-2.
Before use, ensure correct function!
When loosening the lock levers to adjust the height or clamp position, support the accessory, to
prevent it from uncontrolled descend into the bottom position.
Service and preventive maintenance shall be performed by authorized personnel.
MAX 25 kg

3
User instruction
Installation
Usage
A.
B.
A.
B.

4
Maintenance
Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel
only. Altering the construction without a written consent from the manufacturer, is strictly forbidden.
Cleaning
Clean with antiseptic detergent with pH 6 –8 and warm water. Ethanol can be used. Wipe dry with
soft cloth. Do not use strong acidic or alkaline detergent.
Control
Check that there are no loose parts and that there is no damage to any part. Check the clamp lock
function and the function for positioning and locking the accessory pole in the clamp.
Annual service
Once a year the clamp shall be carefully cleaned, moving parts shall be lubricated, the locking function
shall be tested

5
Spare parts
Version:
10-304
10-304-P
Description
Pcs.
Article no.
Article no.
1.
Gear ring
1
10315
10315
2.
Gear cylinder
1
10316
10316
3.
Guide
1
10320
10320
4.
Lock handle
1
10062
10062
5.
Lock handle
1
10346
10346
6.
Screw MKFT M4x8 A2
1
-
-
7.
Washer PB 5x10x5
1
-
-
8.
Stud
1
10325
10429
9.
Set screw MT6SS M5x6 A2
2
-
-
Technical specification
Maximum workload
25 kg, according to EN 60601-1 and EN 60601-2.
Weight
1,0 kg
Material clamp
Stainless steel
Brass
Version
UDI-DI
Dimension
(H x W x L)
10-304
07350111830052
160 x 55 x 120 mm
10-304-P
07350111830069
160 x 55 x 120 mm

6
Reison Medical AB
Eriksbergsvägen 32A
734 92 Hallstahammar
SWEDEN
[phone] I[email protected] Iinf[email protected]