Reison Nordiska 10-457 User manual

USERS MANUAL
TRANSPORT HANDLE
10-457
GMDN 35393
PID 91160
10-457 Edit.1 Page 1 (4)

INTRODUCTION
The transport handles are made to be applied on operating tables, making it easier and more comfortable
to move the operating table, both inside the operating theater and during transport from one operating
heater to another. They are very easy to apply either to the back section or to the leg section.
ABOUT USERS MANUAL
This user manual is for clinical personnel, service personnel and others who need the knowledge about
and understanding of how the transport handles is to be used.
INSTALLATION
At the unpacking, check carefully for any kind of damage on the equipment. Also check that all parts are
received according to the delivery note. The packing material consists of cardboard and plastic, which
all can be recycled.
IMPORTANT SAFETY DIRECTIONS
When applying the transport handles to an operating table, the responsible personnel must be sure of
that the transport handles are properly secured to the accessory rail of the operating table. A suddenly
loose handle can cause collisions with other equipment during transport or cause injuries to other
persons.
Read user manual carefully before use of the equipment.
Always follow the instructions in user manual.
Always keep user manual close to the equipment.
GENERAL DESCRIPTION
The transport handles are to be pushed on to the accessory rail and locks by turning the lock levers
anticlockwise. The levers shall be firmly tightened to avoid loose handles during transport.
To remove the transport handles from the operating table, turn the lock levers clockwise and pull them
off.
10-457 Edit.1 Page 2 (4)

CARE AND MAINTENANCE
Be aware of, that service and all kind of repair only must be done by for this purpose educated
personnel. Changing of the construction without a written permission from the manufacturer is strictly
forbidden.
Cleaning
Clean with mild soap and tempered water. Dry with soft cloth. If necessary, use an antiseptic
detergent with PH 6 –8. Don´t use alcohol or strong acids or bases.
Control
Check the locking functions daily before use.
Annual service
Once a year the transport handles shall be carefully cleaned. The threads of the lock levers shall
be lubricated with a thin white grease. Also the grooves for the rails shall be lubricated.
SPARE PARTS
10-457 Edit.1 Page 3 (4)
1. Transport handle, left side 11276 1pc.
2. Transport handle, right side 11276-1 1pc.
3. Lock lever 10733 2pcs.
4. Ball K20 M10 S 2pcs.

TECHNICAL SPECIFICATIONS
Length 11cm
Height 27cm
Width 5cm
Weight (pair) 1,1kg
Box 240 Eriksbergsvägen 32 A
734 25 Hallstahammar
Sweden
Phone: [phone] Fax: [phone]
E-mail: [email protected]e
www.reison.se
10-457 Edit.1 Page 4 (4)