Reison 10-230 Installation instructions

1
Head rest 10-230 including versions
Version
10-230
10-230-B
10-230-PED
10-230-F
10-230-NO
10-230-Steris
10-230-T
C-C:
Ø:
Length:
106 mm
15 mm
170 mm
C-C:
Ø:
Length:
171,5 mm
18 mm
170 mm
C-C:
Ø:
Length:
106 mm
15 mm
120 mm
C-C:
Ø:
Length:
140 mm
15 mm
170 mm
C-C:
Ø:
Length:
171,5 mm
18 mm
170 mm
Pole:
Length:
20x20mm
180 mm
Warning! This symbol indicates important information related to safety. Follow these
instructions carefully.
Read User Manual before use! It is important to fully understand the content of the user
manual before attempting to use the equipment.
2020-10-30
Document number: M10-230EN rev.01
Head rest 10-230
ENGLISH

2
Intended use
Head rest intended for support and positioning of patient head during e.g. ENT-surgery. The product
is to be used by medical professionals within a medical facility.
Safety regulation
Maximum load: 15 kg in even distribution, corresponding to a patient weight of 200 kg, according to
EN 60601-1 and EN 60601-2.
Before use, ensure correct function!
When loosening the lock lever to adjust the head rest, support underneath the head rest, to prevent
it from uncontrolled descend into the bottom position!
Remove the head rest or secure it over the operating table, during transport!
Service and preventive maintenance shall be performed by authorized personnel.
MAX 15 kg (MAX 200 kg )

3
User instruction
Installation
Position adjustment
A.
B.
A.
B.

4
Maintenance
Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel
only. Altering the construction without a written consent from the manufacturer, is strictly forbidden.
Adjusting the lock mechanism
Tool: 2 mm hex key.
Cleaning
Clean with antiseptic detergent with pH 6 –8 and warm water. Ethanol can be used on metal surfaces.
Wipe dry with soft cloth. Do not use strong acidic or alkaline detergent.
Control
Check that there are no loose parts and that there is no damage to any part. Check the lock function
in the joint of the head rest. Check that the cushion is clean and is not damaged.
Annual service
Once a year the head rest shall be carefully cleaned, moving parts shall be lubricated, the locking
function shall be tested and, if necessary, be adjusted.
A.
C.
B.

5
Spare parts
Version:
10-230
10-230-PED
10-230-B
10-230-F
10-230-NO
10-230-Steris
10-230-T
Description
Pcs
Article no.
Article no.
Article no.
Article no.
Article no.
Article no.
Article no.
1.
Head rest holder
1
10394
11391
11391
10934
10580
11391
12008
2.
Cushion holder
1
10311
10311
10311
10311
10311
10311
10311
3.
Cushion
1
10662
10662-PED
10662
10662
10662
10662
10662
4.
Washer
2
10004
10004
10004
10004
10004
10004
10004
5.
Screw MF6S M5x12 A2
5
-
-
-
-
-
-
-
6.
Screw MF6S M6x12 A2
2
-
-
-
-
-
-
-
7.
Pivot holder
1
10300
10300
10300
10300
10300
10300
10300
8.
Adjustment nut
1
10301
10301
10301
10301
10301
10301
10301
9.
Set screw MSK6SS M4x5 A2
1
-
-
-
-
-
-
-
10.
Nut left threaded
1
10302
10302
10302
10302
10302
10302
10302
11.
Locking screw
1
10303
10303
10303
10303
10303
11405
10303
12.
Lever
1
10304
10304
10304
10304
10304
10304
10304
13.
Ball
1
K20M6S
K20M6S
K20M6S
K20M6S
K20M6S
K20M6S
K20M6S

6
Technical specification
Maximum work load
15 kg in even distribution, corresponding to a patient weight of 200 kg,
according to EN 60601-1 and EN 60601-2
Material Head rest
Stainless steel
Polyurethane
Storage and Transportation
Ambient conditions
Version
UDI-DI
Weight
Dimension
(H x W x L)
10-230
07350111831103
2,8 kg
90-220 x 290 x 420 mm
10-230-B
07350111831110
2,8 kg
90-220 x 290 x 420 mm
10-230-F
07350111831127
2,8 kg
90-220 x 290 x 420 mm
10-230-NO
07350111831158
2,8 kg
90-220 x 290 x 420 mm
10-230-Steris
07350111831172
2,8 kg
90-220 x 290 x 420 mm
10-230-T
07350111831189
2,2 kg
90-220 x 290 x 420 mm
10-230-PED
07350111831165
2,8 kg
90-220 x 290 x 420 mm

7
Reison Medical AB
Eriksbergsvägen 32A
734 92 Hallstahammar
SWEDEN
[phone] [e-mail] [e-mail]