Reison 10-610 User manual

1
Warning! This symbol indicates important information related to safety. Follow these
instructions carefully.
Read User Manual before use! It is important to fully understand the content of the user
manual before attempting to use the equipment.
2021-05-28
Document number: M10-610/611EN rev.01
Tube holder 10-610/611
ENGLISH
10-610
10-611

2
Intended use
Tube holder intended to be used to collect and arrange tubes and cables during surgery and
examination procedures in the OR-theatre. The products are to be used by trained medical
personnel.
Safety regulation
Before use, ensure correct function!
User instruction
Installation
The Tube holder is positioned with the flat plate underneath the mattress on the OR-table. The tube
holder is kept in place by the patient weight.
Cleaning
Clean with antiseptic detergent with pH 6 –8 and warm water. Ethanol can be used. Wipe dry with
soft cloth. Do not use strong acidic or alkaline detergent.
Technical specification
MAXIMUM LOAD ON FLEXIBLE ARM
10-610
0,1 kg
10-611
0,2 kg
Article
no.
UDI-DI
Maximum load
Dimension plate
(H x W x L)
Length
Flex-arm
Weight
Material
10-610
07350111832698
0,1 kg
121 x 80 x 230 mm
30 cm
0,3 kg
PMMA; POM
10-611
07350111832704
0,2 kg
5 x 150 x 380 mm
43 cm
0,5 kg
PMMA; POM
Reison Medical AB
Eriksbergsvägen 32A
734 92 Hallstahammar
SWEDEN
[phone] Iord[email protected] Iinf[email protected]
10-610
10-611