Reison 10-366 User manual

1
Elbow support 10-366 including versions
Version
Description
10-366
Clamp (EU 25x10 mm rail)
10-366-UK
Clamp (UK 1¼ ” x ¼ ” rail)
10-366-US
Clamp (US 1⅛ ’’ x ⅜ ’’ rail)
Warning!This symbol indicates important information related to safety. Follow these
instructions carefully.
Read User Manual before use! It is important to fully understand the content of the user
manual before attempting to use the equipment.
2020-10-30
Document number: M10-366EN rev.01
Elbow support 10-366
ENGLISH

2
Intended use
Elbow support intended for support to the surgeon or supporting staff during surgery. The product is
to be used by medical professionals within a medical facility.
Safety regulations
Maximum load: 15 kg for maintained safety factor according to EN 60601-1 och EN 60601-2.
Before use, ensure correct function!
Remove the elbow support or secure it over the operating table, during transport!
Service and preventive maintenance shall be performed by authorized personnel.
MAX 15 kg

3
User instruction
Installation
Position adjustment
90o
A.
B.

4
Maintenance
Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel
only. Altering the construction without a written consent from the manufacturer, is strictly forbidden.
Cleaning
Clean with antiseptic detergent with pH 6 –8 and warm water. Ethanol can be used on metal surfaces.
Wipe dry with soft cloth. Do not use strong acidic or alkaline detergent.
Control
Check that there are no loose parts and that there is no damage to any part. Check the lock function
of the elbow support. Check that the pad is clean and is not damaged.
Annual service
Once a year the elbow support shall be carefully cleaned, moving parts shall be lubricated, the
locking function shall be tested.

5
Spare parts
Version:
10-366
10-366-UK
10-366-US
Description
Pcs
Article no.
Article no.
Article no.
1.
Inner arm
1
10398
10398
10398
2.
Pivot fitting
1
10300
10300
10300
3.
Outer arm
1
10399
10399
10399
4.
Post
1
10400
10400
10400
5.
Pad
1
10425
10425
10425
6.
Locj lever GN 300 78S M8x16
1
-
-
-
7.
Washer
4
10004
10004
10004
8.
Screw MF6S M6x12 A2
4
-
-
-
9.
Snap ring SGA 18
2
-
-
-
10.
Sleeve
1
10483
10483
10483
11.
Snap ring SGA 16
2
-
-
-
12.
Wood screw TKT 5x16
4
-
-
-
13.
Clamp housing
1
10031
10543
10547
14.
Spacer
1
10526-A
10526-A
10526-A
15.
Guide
1
10053
10053
10053
16.
Adjustable lock lever
1
6.593-65
6.593-65
6.593-65
17.
Screw MC6S M5x45 FZ
2
-
-
-
18.
Shaft
1
10009
10009
10009
19.
Plunger
1
10711
10711
10711
20.
Lock lever
1
10014
10014
10014
21.
Spring
1
10013
10013
10013
22.
Pressure pin
1
10012
10012
10012
23.
Eccentric
1
10015
10015
10015
24.
Ball
1
K20M8S
K20M8S
K20M8S
25.
Nut left threaded
1
10302
10302
10302
26.
Lock lever
1
10304
10304
10304
27.
Set screw MSK6SSD M4x5 A2
1
-
-
-
28.
Set screw MSK6SS M5x8 A2
1
-
-
-
29.
Screw
1
10303
10303
10303
30.
Adjustment nut
1
10301
10301
10301
31.
Ball
1
K20M6S
K20M6S
K20M6S