Reison 10-367 User manual

1
Tibia support 10-367 including versions
Version
Description
10-367
Post with 67 cm height adjustment
10-367-K
Post with 24 cm height adjustment
Warning! This symbol indicates important information related to safety. Follow these
instructions carefully.
Read User Manual before use! It is important to fully understand the content of the user
manual before attempting to use the equipment.
2020-10-30
Dokument nummer: M10-367EN rev.01
Tibia support 10-367
ENGLISH

2
Intended use
Tibia support intended for support and positioning of patient knee and foot during surgery. The
product is to be used by medical professionals within a medical facility.
Safety regulations
Maximum load: 25 kg, corresponding to a patient weight of 135 kg, according to EN 60601-1 and EN
60601-2.
Before use, ensure correct function!
When loosening the lock lever to adjust the position, support underneath the tibia support, to prevent
it from uncontrolled descend into the bottom position.
Service and preventive maintenance shall be performed by authorized personnel.
MAX 25 kg (MAX 135 kg )

3
User instruction
Installation
Maintenance
Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel
only. Altering the construction without a written consent from the manufacturer, is strictly forbidden.
Cleaning
Clean with antiseptic detergent with pH 6 –8 and warm water. Ethanol can be used on metal surfaces.
Wipe dry with soft cloth. Do not use strong acidic or alkaline detergent.
Control
Check that there are no loose parts and that there is no damage to any part. Check that the cushion is
clean and is not damaged.
C.
A.
D.
B.

4
Annual service
Once a year the tibia support shall be carefully cleaned.
Spare parts
Version:
10-367
10-367-K
Description
Pcs.
Article no.
Article no.
1.
Stand
1
11174
11518
2.
Outer disk
1
11173
11173
3.
Cushion
1
10691
10691
Accessories
Article no.
Description
10-304-P
Radial clamp for attachment to operating table accessory rail
10-305-P
Radial clamp for attachment to operating table accessory rail

5
Technical specification
Material Tibia support
Stainless steel
Polyurethane
Version
UDI-DI
Maximum workload
Weight
Dimension (H x W)
10-367
07350111831547
25 kg (MAX 135 kg )
2,5 kg
820 x 300 mm
10-367-K
07350111831554
40 kg (MAX 215 kg )
2,4 kg
400 x 300 mm