Replas PREMIER SETTING 1.8m Free Standing User manual

ASSEMBLYINSTRUCTIONS
IMPORTANT:Pleasereadcarefullybeforeassembling.
PREMIER
SETTING
1.8m
FreeStanding
1.PlaceTable&Benchtopsfacedownonaflatsurface.

2.Placesupportsinsidemetalframe.
NOTE:EnsurethattheTableSupportshavethecountersinkholesfacingoutwardsonthe
supportupright

3.Usingthe75mmbuglescrewssupplied,fitcrossarmbetweenthetwotablesupports.

4.Usinga3.5mmdrillbit,drillintothesupportthroughthepilotholesinthemetalframe.

5.Usingthe40mmHexScrewssupplied,screwsupportontoframe,takingcarenottoovertightenas
thiscouldstripthethreadinthesupport.

6.Onceallscrewshavebeentightened,turnsettingoverandplaceintoposition.

TABLE:

1XTableTop‐pre‐assembled
2XTableSupports
1XTableCrossarm
4X14gx75mmBuglescrews
16X12gx40mmHexScrews
COMPONENTSLIST
BENCHES:

2XBenchTops‐pre‐assembled
4XBenchSupports
24X12gx40mmHexScrews

Ifyourequirefurtherinstallation
assistance,pleasecontactyoursupplier.

815
1800
1800
440
280
4 x (40x200x1800)
3 x (40x90x1800)
25 x 40 x 3mm Frame
40 x 90 x 1260mm Cross Arm
25 x 40 x 3mm Frame
Concrete Slab
Concrete Slab
300
1270
670
670
740
SIDE VIEW - Table only
PRS-1800 FS
PREMIER
FREE STANDING
SETTING
Concrete Slab
SIDE VIEW - Bench only