Replas PREMIER SLIMLINE SETTING User manual

ASSEMBLYINSTRUCTIONS
IMPORTANT:Pleasereadcarefullybeforeassembling.
PREMIER
SLIMLINESETTING
1.8m
FreeStanding
1.PlaceTable&Benchtopsfacedownonaflatsurface.

2.Placesupportsinsidemetalframe.
NOTE:EnsurethattheTableSupportshavethecountersinkholesfacingoutwardson
thesupportupright

3.Usingthe75mmbuglescrewssupplied,fitcrossarmbetweenthetwotablesupports.

4.Usinga3.5mmdrillbit,drillintothesupportthroughthepilotholesinthemetalframe.

5.Usingthe40mmHexScrewssupplied,screwsupportontoframe,takingcarenottoovertightenas
thiscouldstripthethreadinthesupport.

6.Onceallscrewshavebeentightened,turnsettingoverandplaceintoposition
TABLE:

1XTableTop‐pre‐assembled
2XTableSupports
1XTableCrossarm
4X14gx75mmBuglescrews
16X12gx40mmHexScrews
COMPONENTS LIST
BENCHES:

2XBenchTops‐pre‐assembled
4XBenchSupports
24X12gx40mmHexScrews

Ifyourequirefurtherinstallation
assistance,pleasecontactyoursupplier.

755
1800
1800
440
280
440
8 x (40x90x1800)
3 x (40x90x1800)
25 x 40 x 3mm Frame
40 x 90 x 1260 Cross Arm
25 x 40 x 3mm Frame
Concrete Slab
Concrete Slab
300
1270
640
640
740
SIDE VIEW - Table only
SIDE VIEW
PRSS2-1800FS
PREMIER SLIMLINE
SETTING
FREE STANDING
Concrete Slab
SIDE VIEW - Bench only