Rf-t CR120 User manual

E.01
Fire dampers
KIT ONE
Accessories for fire
dampers
Motorisation kit
WWW.CAIROX.BE
Motorisation sets for fire dampers
type KIT ONE
Motorisation kit for fire dampers CR60, CR120, CR2, CU-LT and CU2
Application
¾For changeover of dampers with manual mecahnism with fusible link towards
à motorized mechanism
¾For replacement of defect fire damper servomotor
Composition
¾ONE actuator with spring return equipped with a thermo-electrical fuse.
¾Mounting screws and shaft extension for changeover from manual fusible link
mechanism CFTH or MFUS(P) towards motorized mechanism
¾Mounting plate only needed when replacing CFTH mecanisms, not to be used
for replacing MFUS(P) mecanisms
¾Mounting instruction
Mounting
¾According included mounting instruction
Specifications
ONE T ... FDCU TYPE:
¾Torque motor + spring return: 7 Nm
¾Voltage ONE T 24 FDCU: 24V AC/DC
¾Power (in rest): 0.28 W
¾Power (in use): 4.2 W
¾Voltage ONE T 230 FDCU: 230V AC
¾Power (in rest): 0.57 W
¾Power (in use): 4.2 W
¾Regulation: open/close with spring return
¾Equipped with a thermo-electrical fuse, duct temperature 72°C
¾Integrated start switch and circuit breaker
¾Running time motor wired: <75s
¾Running time motor with battery 9V: <85s
¾Running time spring: <30s
¾Protection class: IP54
¾Cable cross-section: 0.75 mm²
¾Switches: max 1A 60V
E.01 KIT ONE 1/2 - 2022/8/29 - BE-EN

Electrical connection
E.01
Fire dampers
WWW.CAIROX.BE
E.01 KIT ONE 2/2 - 2022/8/29 - BE-EN