RiverRidge Bayfield 06-114 User manual

ASSEMBLY INSTRUCTIONS
ITEM #: 06-114 White
RiverRidge®Bayfield Two-Door Floor Cabinet
ADULT ASSEMBLY REQUIRED
WARNING
SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR TOP BOARD
FOR A TOTAL OF 80 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN
20 POUNDS OR 80 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE
THAN 20 POUNDS PER SHELF OR 80 POUNDS TOTAL WEIGHT, SHELF MAY TIP
FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.

1PC
QTY
1PC
1PC
1PC
1PC
1PC
1PC
1PC
1PC
1PC
Top Board
DESCRIPTION
Left Side Panel
Right Side Panel
Upper Cross Bar
Adjustable Shelf
Shelf
Lower Cross Bar
Bottom Shelf
Upper Back Board
Lower Back Board
Door2PCS
NO
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
10
11 11
9
8

TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
PARTS LIST
NO QTYPARTS DESCRIPTION
A12PCS Cam Bolt
B12PCS Cam Lock
C22PCS Wood Dowel
D
2PCS
E
F
Screw (2.5x10mm)
G16PCS
H
14PCS
J
4PCS
4PCS Hinge
Shelf Holder
Screw (4x30mm)
3PCS
Screw (4x12mm)
Screw (4x35mm)
Plastic Anchor2PCS
K
Adjustable Anchor Bracket2PCS
L
Plastic Connection Strip1PC
M
Screw (4x12mm)2PCS
I
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
1. Insert 4 cam bolts (A) into cam bolt holes on left side panel (2).
2. Insert 4 cam bolts (A) into cam bolt holes on right side panel (3).
1. Insert 4 cam bolts (A) into cam bolt holes on top board (1).
2. Attach 2 brackets (L) to top board (1) by inserting 2 screws (I) through holes on brackets (L),
then tighten to top board (1).
1. Insert 2 wood dowels (C) into wood dowel holes on bottom shelf (8).
2. Attach lower cross bar (7) to bottom shelf (8) by inserting 2 wood dowels (C) into wood
dowel holes on lower cross bar (7) and inserting 2 screws (F) through holes on lower cross
bar (7), then tighten to bottom shelf (8).
STEP 2
STEP 3
A
A
A
A
A
A
A
A
A
A
A
A
C
F
F
C
I
I
I
L
L
L
1
2
3
7
8

1. Attach 2 hinges (E) to door (11) by inserting 4 screws (G) through holes on hinges (E), then
tighten to door (11).
2. Repeat this step to assemble 2 hinges (E) to another door (11).
1. Insert 7 wood dowels (C) into wood dowel holes on left side panel (2).
2. Attach upper cross bar (4), shelf (6), bottom shelf (8) and lower cross bar (7) to left side
panel (2) by inserting wood dowels (C) into wood dowel holes and insert cam bolts (A) into
cam lock holes on upper cross bar (4), shelf (6) and bottom shelf (8).
3. Insert 4 cam locks (B) into cam lock holes on shelf (6) and bottom shelf (8), then rotate
clockwise to secure cam bolts (A) in place.
STEP 4
STEP 5
x2
GG
GGGG
E
E
E
2
4
6
8
7
11
B
B
B
B
C
C
C
C
C
CCC

1. Insert 7 wood dowels (C) into wood dowel holes on right side panel (3).
2. Attach right side panel (3) to upper cross bar (4), shelf (6), bottom shelf (8) and lower cross
bar (7) by inserting wood dowels (C) into wood dowel holes and insert cam bolts (A)
into cam lock holes on upper cross bar (4), shelf (6) and bottom shelf (8).
3. Insert 4 cam locks (B) into cam lock holes on shelf (6) and bottom shelf (8), then rotate
clockwise to secure cam bolts (A) in place.
1. Insert 6 wood dowels (C) into wood dowel holes on top board (1).
2. Attach top board (1) to left side panel (2), right side panel (3) and upper cross bar (4) by
inserting wood dowels (C) into wood dowel holes and insert cam bolts (A) into cam lock holes
on left side panel (2), right side panel (3) and upper cross bar (4).
3. Insert 4 cam locks (B) into cam lock holes on left side panel (2) and right side panel (3), then
rotate clockwise to secure the cam bolts (A) in place.
4. Insert 1 screw (F) into screw hole on upper cross bar (4), then tighten to top board (1).
STEP 6
STEP 7
1
4
2
3
B
B
BB
C
CC
C
C
C
F
B
B
B
B
C
CC
C
C
C
C
3
2
4
68
7

1. Slide 2 back boards into grooves on plastic connection strip (M).
2. Attach upper back board (9) and lower back board (10) to back of cabinet by inserting 14
screws (J) through holes on upper back board (9) and lower back board (10), then tighten
to cabinet.
1. Insert 4 shelf holders (D) into desired position.
2. Place adjustable shelf (5) onto 4 shelf holders (D).
STEP 8
STEP 9
JJ
J
JJ
JJ
JJ
J
MM
J
J
J
J
D
D
D
D
D5
9
10
10
9

1. Attach doors (11) to cabinet by inserting 8 screws (G) through holes on hinges (E), then
tighten to left side panel (2) and right side panel (3).
2. Note: Tightening screw in position “a” will adjust doors up or down; tightening screw in position
“b” will adjust doors to or from cabinet, and tightening screw in position “c” will adjust doors side
to side.
G
G×2
G×2
G×2
G
b
a
a
bc
c
STEP 10
11
11
E

STEP 11
H
H
H
K
K
K
K
H
H
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2OPTION #1
WOOD
STUD
Option #1: Securing to Drywall
1. Position cabinet against wall in desired location. Using a pencil, make 2 small marks on wall through holes
on brackets (L). Move cabinet away from wall and screw 2 plastic anchors (K) into wall on pencil marks.
2. Place cabinet against wall, insert 2 screws (H) through holes on metal brackets (L), then tighten to plastic
anchors (K).
Option #2: Securing to Drywall and Wood Stud
1. Position cabinet against wall in desired location. Insert 2 screws (H) through holes on metal brackets (L),
then tighten through drywall and into wood stud.
*Tip: Anchor brackets (L) can be adjusted to correct distance from wall to cabinet as needed. Once adjusted,
be sure to re-tighten brackets inside cabinet for stability.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or
loose screws/parts. Take appropriate action necessary to correct hazards such as
tightening of screws and taking any damaged parts away from children.
WARNING Please make sure youritem is
secured to the wall, per assembly instructions.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
IMPORTANT:
Keep assembly instructions for future reference.

Enjoy your new RiverRidge®Cabinet!
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.