RiverRidge Afton 16-035 User manual

RiverRidge®Afton 3-Tier Shoe Rack with Storage Bins
ITEM #:16-035
ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED
WARNING
SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 15 POUNDS PER SHELF, 20 POUNDS PER
BIN AND 20 POUNDS PER TOP BOARD OR A TOTAL OF 105 POUNDS. DO NOT
LOAD EACH SHELF WITH MORE THAN 15 POUNDS PER SHELF, EACH BIN WITH
MORE THAN 20 POUNDS AND TOP BOARD WITH MORE THAN 20 POUNDS OR
A TOTAL OF 105 POUNDS. IF OVERLOADED WITH MORE THAN 15 POUNDS PER
SHELF, 20 POUNDS PER BIN AND 20 POUNDS PER TOP BOARD OR 105 POUNDS
TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS INJURY
OR DEATH.

1
2
3
4
5
6
6
7
8
8
9
10
11
Top Board
DESCRIPTION
Left Side Panel
Right Side Panel
Shelf
Bottom Board
Front Panel
Back Panel
Metal Shelf
Bottom Metal Shelf
Left Side Frame
Right Side Frame
1PC
QTY
1PC
1PC
1PC
1PC
2PCS
1PC
2PCS
1PC
1PC
1PC
NO
1
2
3
4
5
6
7
8
9
10
11

Wood Dowel (6x30mm)
Machine Screw (6x35mm)
Cam Bolt
Cam Lock
12PCS
4PCS
16PCS
16PCS
A
B
C
D
EScrew (4x25mm)
4PCS
FAdjustable Anchor Bracket
2PCS
GScrew (4x10mm)
2PCS
HPlastic Anchor
2PCS
IScrew (4x30mm)
2PCS
JScrew (4x35mm)
2PCS
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
PARTS LIST
NO PARTS QTY DESCRIPTION

STEP 1
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Attach brackets (F) to top board (1) by inserting 2 screws (G) through holes on brackets (F),
then tighten to top board (1).
1. Screw 6 cam bolts (A) into cam bolt holes on left side panel (2).
2. Screw 6 cam bolts (A) into cam bolt holes on right side panel (3).
STEP 2
A
A
A
A
G
G
F
F
1
A
A
A
AA
AA
A
A
A
A
A
23

STEP 3
1. Insert 2 wood dowels (C) into wood dowel holes on left side panel (2).
2. Attach 2 front panels (6) to left side panel (2) by inserting wood dowels (C) into wood dowel
holes and cam bolts (A) into cam lock holes on front panels (6).
3. Insert 2 cam locks (B) into cam lock holes on front panels (6), then rotate clockwise to secure
cam bolts (A) in place.
4. Attach shelf (4) and bottom board (5) to left side panel (2) by inserting cam bolts (A) into cam
lock holes on shelf (4) and bottom board (5).
5. Insert 4 cam locks (B) into cam lock holes on shelf (4) and bottom board (5), then rotate
clockwise to secure cam bolts (A) in place.
1. Insert 2 wood dowels (C) into wood dowel holes on right side panel (3).
2. Attach right side panel (3) to 2 front panels (6), shelf (4) and bottom board (5) by inserting
wood dowels (C) into wood dowel holes and cam bolts (A) into cam lock holes on front
panels (6), shelf (4) and bottom board (5).
3. Insert 6 cam locks (B) into cam lock holes on front panel (6), shelf (4) and bottom board (5),
then rotate clockwise to secure cam bolts (A) in place.
STEP 4
B
B
B
B
C
C
2
4
5
6
6
3
24
5
6
6
C
C
B
BB
B
B
B

J
J
8
8
9
2
5
D
D
D
8
8
2
3
STEP 5
1. Attach bottom metal shelf (9) to right side panel (3) by inserting 2 screws (J) through holes on
bottom metal shelf (9), then tighten to end of right side panel (3).
1. Attach 2 metal shelves (8) to right side panel (3) by inserting 4 machine screws (D) through
holes on right side panel (3), then tighten to 2 metal shelves (8).
STEP 6

D
D
D
D
D
D
D
D
2
10
8
8
9
11
STEP 7
1. Attach left side frame (10) to pre-assembled unit by inserting 2 machine screws (D) through
holes on left side frame (10), then tighten to bottom metal shelf (9).
2. Attach right side frame (11) to metal shelves (8) and bottom metal shelf (9) by inserting 6
machine screws (D) through holes on right side frame (11), then tighten to metal shelves (8)
and bottom metal shelf (9).
1. Slide back board (7) into grooves on left side panel (2), right side panel (3) and bottom board (5).
2. Attach top board (1) to pre-assembled unit, make sure back board (7) slides into groove on
top board (1).
3. Insert 4 cam bolts (A) into cam lock holes on left side panel (2) and right side panel (3), then
insert 4 cam locks (C) into cam lock holes on left side panel (2) and right side panel (3). Rotate
clockwise to secure cam bolts (A) in place.
4. Insert 4 screws (E) through holes on left side frame (10) and right side frame (11), then tighten
to top board (1).
STEP 8
BB
B
B
E
E
E
E
7
2
3
1
10
11

STEP 9
H
H
H
H
I
I I
I
I
F
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2OPTION #1
WOOD
STUD
Option #1: Securing to Drywall
1. Position shoe rack against wall in desired location. Using a pencil, make 2 small marks on wall through
holes on brackets (F). Move cabinet away from wall and screw 2 plastic anchors (H) into wall on
pencil marks.
2. Position shoe rack against wall, insert 2 screws (I) through holes on metal brackets (F), then tighten to
plastic anchors (H).
Option #2: Securing to Drywall and Wood Stud
1. Position shoe rack against wall in desired location. Insert 2 screws (I) through holes on metal brackets (F),
then tighten through drywall and into wood stud.
*Tip: Anchor brackets (F) can be adjusted to correct distance from wall to cabinet as needed. Once adjusted,
be sure to re-tighten brackets inside cabinet for stability.
IMPORTANT:
Keep assembly instructions for future reference.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.

Enjoy your new RiverRidge®Shoe Rack!
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.