Rohnson R-818 User manual

Tower Fan with ionizer & remote control
Model: R-818
INSTRUCTION MANUAL
PLEASE READ INSTRUCTIONS CAREFULLY
BEFORE OPERATING

WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
------------------------------------------------------------------------------------------------------------------------------------------
INTENDED USE.
This Tower Fan is designed for light domestic use only. It is not intended for heavy duty, commercial or
industrial use, and is not suitable for use outdoors.
This appliance is not intended for use by children or infirm persons without supervision. Extreme
caution is necessary when used near children, and whenever the appliance is left operating
unattended. Take adequate precautions if such persons are to be left alone in the vicinity of the
appliance.
Use this appliance only as described in this manual. Any other use is not recommended by the
manufacturer and may cause fire, electric shock or injury.
PRIOR TO USE.
Remove the packaging and make sure that the appliance is intact.
Do not leave packaging materials such as bags and staples within reach of children.
Dispose of packaging carefully and with consideration for the environment.
It is recommended that you retain the appliance box for seasonal storage.
For your convenience, record the date you received the appliance on the ‘Warranty’ page of these
instructions and attach your proof of purchase. Retain this information in the event that a warranty
service is required.
SAFETY INFORMATION.
When using any electrically-powered appliance, basic safety precautions should always be followed to
reduce the risk of fire, electrical shock, or injury to persons or property:
CABLES AND PLUGS.
Check to ensure your electricity supply matches that shown on the rating label of the appliance. The
appliance must only be used as rated.
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has
been dropped or damaged in any manner. Return to a qualified electrical person for service and repair.
Do not connect the appliance to the mains voltage until completely assembled and adjusted.
Unroll the cord before operating. Operating with a coiled cord may cause overheating and risk of fire.
The use of an extension cord with this appliance is not recommended.
Do not allow the cord to come into contact with the appliance surface during operation.
Do not run the cord under carpeting, mats or rugs etc. Arrange the cord away from traffic areas so that it
will not be tripped over.
Do not twist, kink or wrap the cord around the appliance as this may cause the insulation to weaken and
split.
Always unplug the appliance when not in use. Do not leave unattended.
Always switch off the appliance before unplugging from the power socket.
Always hold the plug when removing it from the wall, do not pull the cord.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this

appliance must not be supplied through an external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off.
RISK OF PERSONAL INJURY.
Use this appliance only as described in this manual.
Do not use this appliance with any type of external timer.
Always operate upright, on a flat surface only.
WARNING! DO NOT COVER.
Do not cover or restrict airflow to the inlet or outlet grilles in any manner.
To avoid overheating, keep airflow grilles clear of dust and hair build up, especially if you have indoor
pets.
Do not cover grilles or block entry or exits of airflow by placing the appliance against any surface.
Keep all objects at least 1 metre from the front side and rear of the appliance.
Do not insert or allow foreign objects or metal utensils into any ventilation or exhaust openings as this
may cause an electric shock, fire or damage to the appliance.
Do not operate the appliance with wet hands.
Do not immerse in liquid or use the appliance near water as this could create an electrical shock
hazard.
If the appliance accidentally comes into contact with water, switch off the power supply and do not
touch the appliance.
Never attempt to remove the cover of the appliance. Repairs requiring opening the appliance or access
to internal parts must be carried out by a qualified electrician or repair service professional. There are
no user-serviceable parts of this appliance.
Before moving the appliance, switch it off by unplugging it from the wall and allowing it to cool.
Technical Specification
- Rating power : 60W
--Power : 220-240V ~ 50Hz
- Class II
ACCESSORY
Screws for assemble the base ; Remote control

KNOW YOUR PRODUCT
ASSEMBLY
Step 1 : Aiming the assemble poles with the corresponding holes, and insert the poles into the holes.
Step 2 : Aiming the assembled base to screw poles of the fan body
Step 3 : After well connect of the body and base, screw into the screw holes of the base. And put the
power cord into the slot of the base.
Step 4 : Put the fan flatly
Back frame
Handle
Rear Base
Back Pillar
Control Panel
Trim strip
Wind outlet
Front Frame
Front Pillar
Top Cover
Front base
底座
Display board

Control Panel & Remote Control
battery
FUNCTIONS & OPERATION
Press once to activate the Fan. It will default into medium fan (normal mode).
To end operation, press once.
Normal , Natural or Sleep modes can be selected by pressing this
button. The relevant icons will be displayed on screen when selected. （on product
control panel the icon is )
This button allows you to select between Low , Medium or High speeds.
The relevant icon will be displayed on screen when selected.（on product control
panel the icon is )
Activates the oscillating function. Simply press once to start. To end the
oscillating function, press this button again.
This button allows you to enter the ‘timer mode’. Press to increase the number of
hours (1 to 8 ) you wish the Fan to remain operational.
Negative ion function : Push the button to start function of negative ion function
（on product control panel the icon is )
Position the Tower Fan on a flat and even surface where it will not cause obstruction or injury.
Connect the appliance to a suitable mains outlet. The Tower Fan will bleep and display the current
room temperature to indicate the appliance is operational.

Firstly, press the ON/OFF button to start. Once activated, you can then select your desired function
using the Control Panel or Remote Control as described on the previous page.
Normal mode : the product's wind speed works according to the selected wind speed, and the
wind speed remains unchanged.
Natural mode : simulating the work of natural wind, and making irregular changes in product
Sleep mode : At the set wind speed, the product changes irregularly, and at the same time every
half an hour to downgrade until the product low speed work
Please find at below table how the fan is operating in natural and sleep mode:
High speed
Medium speed
Low speed
5 seconds
Medium
Medium
Low
5 seconds
Low
Low
Stop
5 seconds
High
Medium
low
5 seconds
Medium
Stop
Stop
5 seconds
High
Low
Low
5 seconds
Low
Medium
Stop
5 seconds
High
Low
Low
5 seconds
stop
stop
Stop
In sleep mode, every half an hour the speed is downgraded until the product is operated under
low speed.
CLEANING AND CARE
IMPORTANT: Turn off the Tower Fan before cleaning. Vacuum-clean air vents and grilles to
remove dust from these areas.
To remove dust on external surfaces, wipe the Tower Fan with a damp (not wet) lint-free cloth rinsed
in hot soapy water only.
CAUTION: Do not use any harsh detergents or abrasive cleaners.
WARNING! Do not spray with any liquids or submerge in liquid or water.
WARNING! Do not attempt to clean the interior of the Fan. Do not attempt to open the casing at any
time. There are no user-serviceable parts.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH
EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a
special local authority differentiated waste collection center or to a dealer providing this service. Disposing
of a household appliance separately avoids possible negative consequences for the environment and health,
deriving form inappropriate disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled dustbin.