Rohnson R-8400 User manual

1
STAND FAN 30 cm
220-240V, 50-60Hz, 60W
Model : R-8400
Instruction Manual
Read this Instruction Manual carefully before assembling or
operating the appliance and keep it for future reference.

2
SAFETY WARNING
Read this Instruction Manual carefully before assembling or operating the
appliance and keep it for future reference.
When using electrical appliances, basic precautions should always be followed
to reduce the risk of fire, electric shock, and injury to persons, including the
following:
1. To reduce the risk of electric shock, do not immerse or expose this
appliance or flexible cord to rain, moisture, or any other liquid.
2. Dangerous high voltages are present inside this enclosure. To avoid
electric shock, do not open the cabinet, refer servicing to qualified
personnel only.
3. Make sure the fan is not placed near drapes, curtains, or any objects
that may be drawn into the fan. Never place or operate the unit where
it could be subject to:
•Heat sources such as radiators, heat registers, stoves or other products
that produce heat
•Direct sunlight
•Excessive dust
•Mechanical vibration or shock
•Lack of ventilation
•Uneven surfaces
4. The apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
product.
5. Ventilation should not be impeded by covering the ventilation
openings. Slots and opening are provided for ventilation to ensure
reliable operation of the product and to protect it from overheating.
Do not use with any opening blocked, keep free of dust, lint, hair and
anything that might reduce airflow.

3
6. Place the fan on a stable level, dry surface when operating to avoid
overturning.
7. Only connect to a suitable AC 220-240V~50Hz earthed mains socket.
8. Do not operate fan in the presence of explosive and/or flammable
fumes. Do not place the fan near an open flame, cooking or other
heating appliance.
9. Do not operate the fan with a damaged cord or plug, after a
malfunction or if dropped or damaged in any manner.
10. Do not operate without the fan grills properly in place. Do not use if
grill becomes damaged or loose.
11. Do not place the fan close to an open window. Rain splashing on the
fan could cause an electric shock hazard.
12. Do not let the power cord hang over the edge of a table or counter or
let it touch any hot surfaces.
13. Do not insert fingers or allow foreign objects to enter the grill
openings as this may cause injury or damage to the appliance.
14. This appliance is not intended for use by persons (including children)
with reduced physical, sensory, or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
15. WARNING: Children should be supervised to ensure that they do not
play with the appliance.
16. Turn the fan OFF and unplug it from the outlet when not in use, when
moving fan from one location to another and before cleaning.
17. To disconnect, grip the plug and pull it from the wall outlet. Never
pull by the cord.
18. Switch off and unplug from wall outlet when not in use, before
assembling or disassembling parts, and before cleaning. To avoid a
tripping hazard, safely coil the cable.

4
19. Do not place this appliance on any flooring that may be marked or
damaged by vibration of appliances.
20. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified persons in order
to avoid a hazard. Do not attempt to repair, disassemble, or modify
the appliance by yourself. There are no user-serviceable parts inside.
21. We do not recommend the use of an extension cord. It could overheat
and cause a fire hazard.
NOTE: If for any reason this unit requires service, return appliance to
manufacturer or a similarly qualified service agent to ensure safety.
PARTS DESCRIPTION
1. Front grill
2. Back grill
3. Control panel
4. Power cable
5. Upper column
6. Middle column
7. Lower column
8. Base
1
2
3
4
5
6
7
8

5
ASSEMBLY
Please install the fan according to the following step
Assembly of base
For Stand fan (Maximum height)
1. Insert the lower column into the base, fix them by bottom plastic nut
2. Insert the middle column into the lower column, turn the middle column
clockwise and fix them
3. Insert the upper column into the middle column, turn the upper column
clockwise and fix them
4. Insert the fan body into the upper column, turn the fan body clockwise and
fix them
Assembly of blade and Grill
1. Remove the lock nut for blade and the lock nut for back grill
2. Assemble the back grill
Align the back grill and the lock nut for back grill on the motor house, then

6
fasten the lock nut firmly to fix the back grill
3. Assemble the fan blade
Align the hole of blade and the lock nut for blade onto the motor shaft, then
fasten the lock nut firmly to fix the blade.
4. Assemble the front grill
5. Insert the front grill into the frame of the back grill. Rotate the “-” of the
front grill to align with the “ ” of the back grill, then fix them by screw , the
screw is on the bottom of grill as below photo
Height adjustment
The fan supports 3 kinds of height (one plastic column=lower height,
two plastic tubes=middle height, three plastic columns= Maximum height)
Operating instruction
Plug in, the fan will be in standby mode.
The fan can be operated by pressing button on the control panel or by the
supplied remote control.
Power/Fan speed
Press « » button one time, the fan will start at low fan speed.
Press the « » button two times, the fan will work at middle fan speed.

7
Press the « » button three times, the fan will work at high fan speed.
When the fan work at high fan speed, press the button again, it will stop
working.
Timer
The fan is equipped with a 7-hour timer.
Press button, the fan can be set from 1 to 7 hours.
The fan will stop automatically after the set time has expired.
If you wish the fan to run continuously, ensure the timer is set to 0. your an
Oscillation
Press button, the fan will oscillate automatically for widespread air
distribution. Press the button one more time, the fan will stop oscillate.
Remote control
Remote control operations are identical to the functions of the control panel.
It includes one coin battery, before first use, pull the plastic insulation film our
from the backside of remote control
NOTE: the remote control must be pointed towards the receiver on the fan.
Please take out the battery for long time no use.
CLEANING AND MAINTENANCE
•The appliance, the power cord and the power plug should not be
immersed in water or other liquids when you are cleaning them. Clean
them with a dry cloth.
•If it is very dirty, the outside of the appliance can be wiped carefully
with a moist cloth and then dried carefully. Make sure that no
moisture penetrates into the interior of the appliance.
•Do not use any harsh cleaners, steel brushes, scouring powder or other

8
hard objects to clean the appliance as these can cause scratches on
the surfaces.
•Clean the appliance regularly.
•Never use solvents, benzene, or oil-based cleaners as these can
damage the housing.
•Re-tighten visible screw connections on the appliance regularly in
order to ensure that the device is functioning properly.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban
waste. It must be taken to a special local authority differentiated waste
collection center or to a dealer providing this service. Disposing of a household
appliance separately avoids possible negative consequences for the
environment and health, deriving form inappropriate disposal and enables the
constituent materials to be recovered to obtain significant savings in energy
and resources. As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled dustbin.