Rohnson R-8371 User manual

INSTRUCTION MANUAL
TABLE FAN 40CM R-8371
AC220V-240V / 50Hz 45W
BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND,
AND FOLLOW THESE INSTRUCTIONS.

BEFORE FIRST USE
General Safety Instructions
Read this instruction manual thoroughly before using the appliance and save
it for future reference and if it is necessary pass the instruction manual on to a
third party.
WARNING
When using electrical appliance, basic safety precautions should always be
followed to reduce the risk of fire, electrical shock and personal injury.
Handle carefully the motor, the plastic fan blades, and other fan parts when
assembling or disassembling them, to avoid injury and/or damage.
1) This product is intended for general domestic use. Do not use the
product for any other purpose.
2) Keep the product out of the reach of children and pets. This product is
not intended for use by children.
3) Do not leave the product unattended while it is in use, especially when
children are present.
4) Always unplug the product from the electrical outlet when it is not in
use.
5) Always operate the product on a flat, steady, and stable surface to
avoid it overturning.
6) Do not hang or wall-mount the product.
7) Do not place the product outside or near an open window. Rain, snow,
and other weather elements may create an electrical hazard.
8) Keep the power cord and product away from heated surfaces.
9) Always unplug the product from the electrical outlet when cleaning it.
10)Do not plug/unplug the product into/from the electrical outlet with a wet
hand.
11)Never insert fingers or any other object through the fan guards.
12)Never drop or insert objects into any opening of the product
13)Do not attempt to open any part of the motor housing, as a risk of
electrical shock may exist.
14)Never operate the product without the fan guards in place, as serious
personal injury may result.
15)Do not allow the power cord to hang (i.e., over the edge of a table or
counter) where it may be tripped over
16)or pulled.
17)Do not operate product if the power cord is cut, damaged, or if the
wires are exposed.
18)Do not immerse or expose the motor housing, power cord, or plug to
water or other liquids.
19)Disconnect the plug (do not pull on the power cord) from the electrical
outlet.
20)Do not put any stress on the power cord where it connects to the
product, as the power cord could fray and break.

21)Do not operate the product if it has a damaged power cord or plug,
malfunctions, is dropped, or damaged. This product has no user –
serviceable parts. Do not attempt to examine or repair this product
yourself. Qualified service personnel should perform any servicing.
22)This product is intended for indoor, non-commercial, non-industrial;
household use only. Do not use outdoors.
23)This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety.
24)Children should be supervised to ensure that they do not play with the
appliance.
OVERVIEW THE FAN
1. Front Grill
2. Blade Lock Nut
3. Blade
4. Grill Lock Nut
5. Back Grill
6. Motor
7. Front Motor Cover
8. Motor Cover
9. Oscillation Button
10. Fixed Nut
11. Fixed Screw
12. Motor Holder
13. Speed Button
14. Base
15. Base Fixed Screw

ASSEMBLING THE FAN
1. Take off all the appliance parts out of the packaging and remove all
packaging materials and inserts.
2. Take the main body (13), put it into the base (14), and fixed by base fixed
screw (15)
3. Take the back grill (5), put it on the motor (6), and fixed by grill lock nut (4)
4. Take the blade (3), put it into the motor (6), and fixed by blade lock nut (2)
5. Take the front grill (1), put it to match the back grill (5). And fixed by fixed
screw (11) and fixed nut (10)
On / Off and Speed Control
The ON/OFF and Speed is controlled by the buttons in the main body.
0- The Fan is switched Off
1- The Fan operates at the Low speed
2- The Fan operates at the middle speed
3- The Fan operates at the high speed
Oscillation Adjustment
Push the oscillation control to turn on the oscillation function, pull the oscillation
control to turn it off. (Fig.7)
(Fig.7)
Cleaning
Before cleaning the appliance always disconnect the power plug from
the receptacle.
•The appliance, the power cord and the power plug should not be
immersed in water or other liquids when you are cleaning them. Clean
them with a dry cloth.

•If it is very dirty, the outside of the appliance can be wiped carefully
with a moist cloth and then dried carefully. Make sure that no moisture
penetrates the interior of the appliance.
•Do not use any harsh cleaners, steel brushes, scouring powder or
other hard objects to clean the appliance as these can cause
scratches on the surfaces.
•Clean the appliance regularly.
•Never use solvents, benzene or oil-based cleaners as these can
damage the housing.
•Re-tighten visible screw connections on the appliance regularly in
order to ensure that the device is functioning properly.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT
IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban
waste. It must be taken to a special local authority differentiated waste
collection center or to a dealer providing this service. Disposing of a household
appliance separately avoids possible negative consequences for the
environment and health, deriving form inappropriate disposal and enables the
constituent materials to be recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled dustbin.