Ronbow Signature series Assembly instructions

INSTALLATION AND CARE GUIDE
PURE SIDE CABINET
E076115

PURE 57” Tall Wall Cabinet
Model : E076115 Designed By: ALEXANDER ZHUKOVSKY | RUSSIA
REV. 160810ronbow.eu | ronbow.comINSTALLATION SHEET
1
Tools Required
PRE-INSTALLATION
2 2x4 beam cut to size
6 long screws
1 pair of wall brackets
Materials Included
Materials Required

PURE 57” Tall Wall Cabinet
Model : E076115 Designed By: ALEXANDER ZHUKOVSKY | RUSSIA
REV. 160810ronbow.eu | ronbow.comINSTALLATION SHEET
2
Figure 1.
Step 2: Front notch the studs to fit the
2x4 beam.
Each beam center to center should be
44-3/4” apart.
Step 3: Place each wall bracket at the
desired location and drill pilot holes
where the bolts will be used to secure
the brackets.
Step 4: Secure the cleat to the wall using the
long screws provided.
Verify the wall cleats are level.
INSTALLATION
Step 1: Determine the ideal location of your
new wall cabinet.
Check if the location has at least two
studs for the 2x4 horizontal beams to
sit in place.
Figure 2.
See Figure 1.
See Figure 2.
44-3/4” (113.5cm)
2x4 beam
2x4 beam
44-3/4” (113.5cm)

PURE 57” Tall Wall Cabinet
Model : E076115 Designed By: ALEXANDER ZHUKOVSKY | RUSSIA
REV. 160810ronbow.eu | ronbow.comINSTALLATION SHEET
3
Step 5: Lift and gently place the wall cabinet
on the wall cleats.
Verify the cabinet is level.
Figure 3.
See Figure 3.

PURE 57” Tall Wall Cabinet
Model : E076115 Designed By: ALEXANDER ZHUKOVSKY | RUSSIA
REV. 160810ronbow.eu | ronbow.comINSTALLATION SHEET
4
Wood Surfaces
Recommended Products
The fine furniture finish of your new vanity, mirror or other bathroom accessories are designed to
protect against normal home use. With proper care, your product will provide years of use and beauty
in your home.
General Care Tips
PRODUCT CARE AND MAINTENANCE
• If a spill occurs, clean and dry the surface immediately as liquid can soak through the surface and cause
greater damage.
• Do not place in direct sunlight. Exposure to sunlight may affect the appearance of your vanity, and the
finish will eventually crack.
• Keep away from direct sources of extreme temperatures as heat, cold or moisture from humidity.
Color changes, or blemishes in the wood can occur if recommended care of is not met. Try to avoid
these extremes.
• Most wood surfaces can be cleaned, or dusted, with any commercial wood cleaning product. For general
cleaning, use a non-abrasive, or lint-free cloth while dusting along the wood grain to preserve the
wood’s chacteristics.
• Pledge Orange Oil, or similar
• Orange-Glo Wood Cleaner
DISCLAIMERS: Wood naturally ages, darkens and changes color over time due to several environmental conditions that may cause materials to vary from their
original color and/or to warp, split or crack. These variations are considered to be the nature of the material in relation to their environmental exposure and may
be significant over a long period of time. The eectiveness of cleaning Ronbow product is dependant on various factors that include sunlight, smoke, moisture,
household cleaners and/or amount of cleaning product used over time. Ronbow cannot guarantee that the above Product Care & Maintenance methods will
eectively clean your product.
• Test cleaning product on small, discrete area prior to applying to entire surface.
• Wipe surfaces frequently with dry, soft, non-abrasive and lint-free towel.
• Do not allow liquids and moisture to accumulate on the surface of products.
• For warranty information, please visit our website at www.ronbow.com or contact the Customer Service
Department at [phone].

160810
40650 Encyclopedia Circle
Fremont, CA 94538
T 510.713.1188
F 510.657.9388 ronbow.eu | ronbow.com