ROSE DISPLAYS ANOMULTI WITH WINDOW MOUNTS User manual

35 Congress Street, Salem, MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
Parts
Instructions for Hanging
Sign Mounting Systems for Windows
Step 1
Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1
Note: For thinner substrates, it may be neces-
sary to staple the edge of the graphic before
inserting into Slim Holder.
Step 2
Slide Slim holder into AnoMulti holder. Fig. 2
Step 3
Slide the Window Suction Cups into the top rail
of the AnoMulti Holder. Fig. 3
Step 4
Push end caps into place. Fig. 4
Step 5
Suspend poster. Make sure glass and suction cups
are clean and free of dust and dirt.
Important note:
For best performance when first applied and
occasionally thereafter, press the middle of the
cup (on the cap) to “burp” extra air out.
AnoMulti™
Instructions for Hanging
Incept-9.12.02
Figure 1
Figure 2 Figure 3
The AnoMulti™ and Slim™ are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiWindowMounts
End Caps
06-5525
AnoMulti
12AM300
Figure 4
Window Mounts
20-0038

Parts
Instructions for Hanging
Sign Mounting Systems for Windows
Step 1
Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1
Note: For thinner substrates, it may be neces-
sary to staple the edge of the graphic before
inserting into Slim Holder.
Step 2
Slide Slim holder into AnoMulti holder. Fig. 2
Step 3
Slide the Window Suction Cups into the top rail
of the AnoMulti Holder. Fig. 3
Step 4
Push end caps into place. Fig. 4
Step 5
Suspend poster. Make sure glass and suction cups
are clean and free of dust and dirt.
Important note:
For best performance when first applied and
occasionally thereafter, press the middle of the
cup (on the cap) to “burp” extra air out.
AnoMulti™
Instructions for Hanging
Incept-9.12.02
Figure 1
Figure 2 Figure 3
The AnoMulti™ and Slim™ are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiWindowMounts
End Caps
06-5525
AnoMulti
12AM300
Figure 4
Window Mounts
20-0038