Royal Sovereign IL-926W User manual

Owner’s Manual
2 Roller Pouch Laminator
Royal Sovereign International,Inc. Please read and retain these instructions.
To register your product, please go to www.royalsovereign.com
IL-926W
IL-1326W

Thank you for purchasing the Royal Sovereign 2 Roller IL Series Pouch Laminator.
This manual will provide you with safetyinformation, instructions for optimal use,
and proper care and maintenance for your product. Please read this manual
carefully before operating.
CONTENTS
2Read & Fully Understand This Owner’s Manual Before Using This Machine.
SAFETY INSTRUCTIONS ............................................................................... 3
PRODUCT VIEW /FEATURES ......................................................................... 4
PRODUCT OPERATION................................................................................. 5 -6
TROUBLESHOOTING ................................................................................... 6
SPECIFICATIONS ....................................................................................... 7
WARRANTY ............................................................................................. 8

3
When using this machine follow these safety precautions to reduce risk of fire, electric shock, or injury.
SAFETY INSTRUCTIONS
WARNING
Operating
1. Do not allow foreign articles inside the machine.
2. Do not attempt to laminate items that exceed total recommended material thickness.
3. Do not insert pouch film with the back end first. (Front of film: sealed side, Back of film: open side) This may
cause the pouch to jam the rollers.
4. Do not cut pouches before inserting them into the laminator, as this will cause the laminator to jam.
5. Do not laminate leaves, flowers, clothes etc.
6. When unplugging the unit please grip the plug body, not the supply cord.
7. Do not place objects on the power cord and do not bend it excessively.
8. The laminator creates heat, so keep out of the reach of children. This machine should not be used by children.
9. When not using the machine for long periods of time, unplug the power cord from the outlet.
10. Do not operate the machine for any other purpose other than its intended use.
11. The LED ready light may take longer to turn on in lower room temperature environments. (less than 64°F / 17.8 °C.)
12. This unit is recommended to be used in a normal room temperature environment. (68°F -77°F / 20°C - 25°C)
13. This unit is intended for indoor use in a dry environment only.
14. Always place the equipment on a suitable, stable table only.
15. To protect against fire, ensure that the cover ventilation of the unit is not obstructed during operation.
Electrical
1. The machine should be placed near an electrical outlet so that the outlet is easily accessible.
2. Make sure the voltage meets the machine’s electricity requirements.
3. Do not operate if the electrical plug or power cord is damaged.
4. Do not under any circumstances alter the electric plug in anyway.
5. Do not immerse the machine in water or permit liquid to get inside the machine.
6. Ensure that the power cord is inserted properly into the electrical outlet.
7. Turn off the power when unattended or not in use.
CAUTION

4
FEATURES
Two Roller System
•The two roller system provides precise heat and pressure to ensure high quality lamination. To assist with jams,
this unit is equipped with a jam release switch located on the back of the unit.
Hot and Cold Lamination
•The laminator can easily be adjusted to handle both hot and cold lamination pouch film.
Temperature Control
•Use the setting control switch to change settings for different film thicknesses from 3-5 Mil.
Fast Speed
•Laminates up to 18.9” (480 mm) per minute.
Overheat Protection
•This machine is equipped with overheat protection and will automatically turn off the unit after 30 minutes of
non-use.
Output Tray (Included)
Feed In
ON / OFF
Switch
Setting Control Switch
(Cold, 3Mil, 5Mil)
PRODUCT VIEW

5
Before laminating important or unique documents, always test a pouch through the laminator using a similar
document.
Hot/Cold Lamination
1. Place the machine on a flat, sturdy surface and flip the power switch to turn on the machine.
2. Use the setting control switch to toggle between Cold Lamination and Hot Lamination options
ranging from 3-5 Mil.
•For hot lamination, the machine will take approximately 60 seconds to warm-up.
NOTE: Standard temperature setting is based on 20lb/80g/m2 copy paper thickness. When
laminating thicker materials, the temperature may not be high enough. In this case, please
select the 5 Mil film setting.
NOTE: A red light may be visible on Feed In before the product is ready. This is due to the
laminator heating up.
•Cold lamination does not require any warm up. As soon as the unit is turned on, it is ready
for use.
NOTE: If the machine was previously used in hot mode, allow approximately 25 minutes to
cool down.
3. Place the item to be laminated into the laminating pouch.
•For Cold Lamination you need adhesive Cold Laminating or Self-Seal Pouches. To laminate,
place the item on the adhesive side of the cold film with the document face down.
4. Insert the pouch film into the front opening of the laminator. Make sure to place the sealed end
of the pouch film in first.
•For Cold Lamination remove the paper liner from the cold film slowly while the document is
being inserted into the machine.
PRODUCT OPERATION

TROUBLESHOOTING
6
Symptom Solutions
Motor does not work •Check to make sure the machine is plugged in.
•Check to make sure the power button is turned on.
Pouches are not laminating
correctly
•Make sure that the machine is set to the correct Mil setting.
The rollers are moving, but
the laminate item is not
(Machine is jammed)
•Press the jam release button on the back of the unit and pull out the pouch
through the front by hand. Try laminating again after 8 seconds.
NOTE: For all replacements and repairs that need to be made, contact Royal Sovereign Customer Service at [phone]
5. The document or photo will then automatically feed out through the back of the machine.
NOTE: Laminated items exiting the machine may be too hot to touch.
6. If the item is not completely laminated, repeat steps 4-5.
NOTE: For Hot lamination, laminated items will be hot and will easily bend. To keep the item flat,
place on a flat surface and allow to cool.
7. If you turn the unit off, the fan will continue to run to cool down the laminator. The fan will
automatically turn off when the unit is cool. This will take approximately 15 - 20 minutes.
PRODUCT OPERATION

7
MODEL IL-926W IL-1326W
Power Supply Voltage 120V (60 Hz) 120V (60 Hz)
Power Consumption (W) 500W 760W
Number of Rollers 2 2
Speed 18.9 in. (480 mm) per minute 18.9 in. (480 mm) per minute
Maximum Entry Width 9 in. (230 mm) 13 in. (330 mm)
Pouch Mil. Thickness 3 Mil. –5 Mil. 3 Mil. –5 Mil.
Warm-up Time 60 seconds 60 seconds
Unit Dimensions
(W x D x H)
13.58” x 4.13” x 2.95”
345 mm x 105 mm x 75 mm
17.10” x 4.13” x 2.95”
435 mm x 105 mm x 75 mm
Unit Weight 2.65 lbs. (1.2 kg) 3.88 lbs. (1.76 kg)
Certification cTUVus cTUVus
SPECIFICATIONS

Royal Sovereign International, Inc. warranties this product to be free from defects in material and workmanship
for a period of one (1) year. This warranty is extended to the original purchaser only.
This warranty only covers products that are properly installed, properly maintained, and properly operated in accordance
with the instructions provided. This limited warranty does not cover any failures or operating difficulties due to normal wear
and tear, accident, abuse, misuse, alteration, misapplication, improper installation, or improper maintenance and service by
you or any third party.
Returned product will not be accepted without a Return Authorization number. To request a Return Authorization number,
please visit us at www.royalsovereign.com. All transportation costs for the return of damaged product or parts will be the
responsibility of the purchaser. Return defective product, in original packaging, to the address below.
Royal Sovereign International, Inc.requires reasonable proof of your date of purchase from an authorized retailer or
distributor.Therefore, you should keep your receipt, invoice, or canceled check from the original purchase.The limited
warranty shall be limited to the repair or replacement of parts which prove defective under normal use and service within
the warranty period.
Royal Sovereign International, Inc. (and its affiliated companies) SHALL HAVE NO LIABILITY WHATSOEVER TO
PURCHASER OR ANY THIRD PARTY FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL,OR CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion and
limitations may not apply to you.
For product support and warranty questions, please visit us at
www.royalsovereign.com/CustomerSupport
ROYAL SOVEREIGN INTERNATIONAL, INC.
2 Volvo Dr., Rockleigh, NJ 07647 USA
TEL: [phone]
Email: [e-mail]
8
ONE YEAR LIMITED WARRANTY
RS INTERNATIONAL CANADA INC.
191 Superior Blvd, Mississauga Ontario L5T 2L6 CANADA
TEL : [phone] TF # : [phone]
FAX : [phone]
www.royalsovereign.ca

Guide d’utilisation
Plastifieuse de pochettes
à 2 rouleaux
Royal Sovereign International,Inc. Veuillez conserver ces instructions pour consultation ultérieure.
Pour enregistrer votre produit, visitez le www.royalsovereign.com
IL-926W
IL-1326W

Merci d'avoir acheté la plastifieuse de poche à 2 rouleaux Série IL de Royal
Sovereign. Ce manuel vous fournira des informations de sécurité, des
instructions pour une utilisation optimale, ainsi qu'un entretien et une
maintenance appropriés de votre produit. Veuillez lire attentivement ce
guide d’utilisation avant d'utiliser l’appareil.
CONTENU
10 Veuillez lire et comprendre parfaitement ce guide d'utilisation avant d'utiliser cet appareil.
INSTRUCTIONS DE SÉCURITÉ ........................................................................ 11
SURVOL DU PRODUIT /CARACTÉRISTIQUES....................................................... 12
FONCTIONNEMENT DU PRODUIT .................................................................... 13 -14
DÉPANNAGE ............................................................................................ 14
SPÉCIFICATIONS ....................................................................................... 15
GARANTIE ............................................................................................... 16