RTA Products Techni Mobili RTA-8104 User manual

MODEL RTA - 8104
M O DEL RTA-8 1 0 4
Thanks for purchasing one of our products.
Please read carefully the assembly instructions before the installation.
Please save this manual for future reference.
A S S E M B L Y I N S T R U C T I O N S

M O DELO RTA-8 1 0 4
Gracias por comprar uno de nuestros productos.
Por favor lea cuidadosamente las instrucciones de ensamblaje antes de
instalar la unidad.
Por favor guarde este manual para referencias futuras.
MODELO RTA - 8104
1
2
4
5
6
8
9
1 0
1 3
11
1 2
1 5
7

RTA-8104
DIMENSIONS
MAXIMUM WEIGHT CAPACITIES
DO NOT exceed this limit
Please use care and good judgement
when placing objects on wood surface
Product Size: 47"W x 24"D x 34"H
16.5"

PARTS LIST
123
68
45
7
RTA-8104 P.4
1
2
4
5
6
8
9
10
13
11
12
15
7
LISTA DE PARTES
Main Panel
Panel Principal
Back Panel
Panel Posterior
Studs
Topes
Left Vertical Panel
Panel Vertical Izquierdo
Right Vertical Panel
Panel Vertical Derecho
Auxiliary Panel
Panel Auxiliar
Bottom Panel
Panel de Fondo
Vertical Tube
Tobo Vertical
x6

P.5
910 11 12
13 14 15
16
Left
Right
A
B
D
C
6X35 MM
6X25 MM
6X12 MM
4
4
4
4
PART QTY. ITEM PART QTY. ITEM
1
SCREWS LIST
E
F
G
6X40 MM
6X50 MM
4X14 MM
4X4 MM
20
6
4
H2Φ16 MM
RTA-8104
Horizontal Panel
Panel Horizontal
Printer Panel
Panel de Impresora
CPU Vertical Panel
Panel Vertical de CPU
CPU Bottom Panel
Panel de Fondo de CPU
Supporting Tube
Tubo de Soporte
Slider’s Base
Base de los Deslizadores
Keyboard Panel
Panel de Teclado
Slider
Deslizadores
LISTA DE TORNILLOS
Izquierdo
Derecho
x4
x3

P.6
RTA-8104
1. 2. 3.
Screw the bolt into the
corresponding panel.
In the other panel, insert
and align the cam lock.
Join the panels.
Turn the cam lock.
MISALIGNED:
TURN CAM LOCK
TO POINT TOWARDS
THE HOLE CORRECT
HOW TO ASSEMBLE USING BOLTS AND CAM LOCKS:
C MO ENSAMBLAR USANDO LOS PERNOS Y CERRAJES:Ó
If the panel already comes with the cam lock inserted, make sure is aligned:
Cam bolt
Perno
Cam lock
Cerraje
Atornille el perno al
panel correspondiente. En el otro panel, inserte el
cerraje y alineelo.
Junte los paneles.
Gire el cerraje.
Si los paneles ya vienen con los cerrajes, aseg rese que est n alineados:ú é
CORRECTO
DESALINEADO:
GIRE EL CERRAJE
PARA QUE APUNTE
HACIA EL HOYO.

P.7
GENERAL ASSEMBLY TIPS AND TROUBLESHOOTING DURING ASSEMBLY:
*Before you start assembling, make sure you have all the parts and necessary
hardware by doing a quick inventory.
*Follow the assembly instructions step by step, and do not skip any unless
advised to do so by RTA PRODUCTS’ Customer Service.
*On each step, and to avoid misalignments, always leave screws loose, and
do not tighten them until all are in place.
*In wood panels, the laminate might be covering the holes.
If there are no visible holes: Pass the tip of your finger around the area where
the hole should be, and press against the surface to feel the indentation.
If the hole looks too small for the screw of bolt: carefully perforate the laminate
with the tip of a pen.
DOES THE HOLE
LOOK TOO SMALL?
CAREFULLY
PERFORATE. THE HOLE IS BIGGER
THAN WHAT IT APPEARED.
*In wood panels, some might have inserts that look like screws. Those inserts are
either nuts or cam locks. Make sure they are aligned to receive the screws or bolts.
Misaligned
nut CORRECT Misaligned
cam lock CORRECT
*Make sure to use the correct screws or bolts, and do not overtight them.
Using wrong screws or overtighting them might cause damage to the parts,
and such damage is not covered by the product’s warranty.
30mm
30mm
35mm
35mm
CORRECT SIZE OF SCREW
SCREW IS NOT OVERTIGHTEN A WRONG SIZE OF SCREW
OR OVERTIGHTING IT WILL
CAUSE DAMAGE!
RTA-8104

P.8
CONSEJOS PARA RESOLVER PROBLEMAS DURANTE EL ENSAMBLAJE:
*Antes de comenzar, haga un inventario r pido para asegurarse de tener todas
las partes y tornillos necesarios.
á
*Siga las instrucciones paso por paso, y no se salte ninguno a menos que se lo
aconseje un representante de Servico al Cliente de RTA PRODUCTS.
*Para evitar desalineamientos, en cada paso que haga deje los tornillos medio
puestos, y no los apriete hasta que todos estén colocados en sus lugares.
*En paneles de madera, el laminado podr a cubrir las perforaciones.
Si no ve los hoyos: Pase la punta del dedo por el area y presione contra la
superficie para encontrar el hoyo.
Si el hoyo luce muy peque o para el tornillo o perno: Con cuidado perfore el
laminado con la punta de un lapicero (bol grafo, pluma).
í
ñ
í
El hoyo luce
demasiado peque o?ñ
Perf relo
con cuidado.
óEl hoyo es m s
grande de lo que
aparenta.
á
*Algunos paneles pueden tener insertados lo que parecen tornillos, pero son
tuercas o cerrajes: Asegúrese que esten alineados para recibir el tornillo o perno.
Tuerca
desalineada. CORRECTO.
Cerraje
desalineado.
*Aseg rese de usar los tornillos y pernos correctos, y no los apriete demasiado.
Usar tornillos/pernos de tama o incorrecto o sobre-apretarlos pede causar
da o a las partes, lo cual no es cubierto por la garant a del producto.
ú
ñ
ñ í
30mm
30mm
35mm
35mm
Tornillo de tama o
correcto, sin sobre
apretar.
ñTornillo de tama o
incorrecto o sobre
apretado causar
da o a la parte!
ñ
á
ñ
RTA-8104
CORRECTO.

P.9
1
1
14 X4
F
SCREWS
4PCS
6X12 MM
214 X4
16 Left
Right
16
B
4PCS
4X4 MM
RTA-8104
Steps Pasos
Use Screws (F) to assemble the Slider’s Bases (14) to the back of Main
Panel (1).
Use Tornillos (F) para ensamblar las bases de los deslizadores (14) en
el rev s del Panel Principal (1).é
Use Screws (B) to fix the Sliders (16) to the Bases (14).
Use Tornillos (B) para fijar los Deslizadores (16) a las Bases de los
Deslizadores (14).
3
5
4
6
D
4PCS
6X40 MM
Insert the Bolts (D) in the holes of the Left & Right Vertical Panels (4&5)
and tight them with the screwdriver, then place the Auxiliary Panel (6)
over the Bolts and tight the cam locks on the inside face of the panels.
Inserte los Pernos (D) en los agujeros de los Paneles Verticales Izquierdo
e Derecho (4&5) y aj stelos con el destornillador, luego coloque el
Panel Auxiliar (6), haciendo coincidir los agujeros laterales con los
Pernos (D) y ajuste los cerrajes ubicadas en la cara interna de ste panel.
ú
é
TORNILLOS
SCREWS TORNILLOS
SCREWS TORNILLOS
Izquierdo
Derecho
ATTENTION: THE ASSEMBLY STARTS WITH THE PARTS UPSIDE-DOWN.
ATENCI N: EL ENSAMBLANDO COMIENZA CON LAS PARTES AL REVÉS.Ó

P.10
4
5
1
4
5
D
4PCS
6X40 MM
1
8
6
C
1PC
6X25 MM
8
338mm 356mm
RTA-8104
Insert the Bolts (D) in the holes of the back side of Main Panel (1) and tight
them with the screwdriver, then place the Left & Right Vertical Panels (4&5)
over the Bolts (D) and tight the cam locks on the inside face of these panels.
Inserte los Pernos (D) en los agujeros de la parte posterior del Panel Principal (1)
y ajuste con el destornillador, luego coloque los Paneles Verticales Derecho e
Izquierdo (4&5) sobre los Pernos y ajuste los cerrajes colocadas en la cara interna
de stos paneles.é
Insert the Vertical Tube (8) through the Auxiliary Panel (6) and use Screws (C)
to fit it to the back of the Main Panel (1).
Inserte el Tubo Vertical (8) a trav s del Panel Auxiliar (6) y use Tornillo (C)
para fijarlo a la parte posterior del Panel Principal (1).
é
SCREWS TORNILLOS
SCREWS TORNILLOS
13.3"
14"

P.11
6
4
5
7
D
5PCS
6X40 MM
8
RTA-8104
Insert the Bolts (D) in the holes of the Bottom Panel (7) and tight them with
the tool, then place it over the Left & Right Vertical Panels (4&5) and tight
the cam locks on the inside face. Finally, insert the Bolt (D) into the Vertical Tube (8).
Inserte los Pernos (D) en los agujeros del Panel de Fondo (7) y ajuste con el destornillador, luego
coloquelo sobre los Paneles Verticales Derecho e Izquierdo (4&5) y ajuste los cerrajes colocadas en la
cara interna de estos paneles. Inserte un Perno (D) en el Tubo Vertical (8).
7
7
8
A
1PC
6X35 MM
Use Screw (A) to fix the Vertical Tube (8) to the Bottom Panel (7).
SCREWS TORNILLOS
SCREWS TORNILLOS
Use Tornillo (A) para fijar el Tubo vertical (8) al Panel de Fondo (7).
Just insert the bolt through the hole
of Vertical Tube (8).Its function is to
help support the Panel (6).
S lo inserte el perno en el agujero
del Tubo Vertical (8). Su funci n es
ayudar a sostener el Panel (6).
ó
ó

P.12
8
11
12
9D
2PCS
6X40 MM
2PCS
6X50 MM
2PCS
HΦ16 MM
E
RTA-8104
Use Screws (E&H) to fix the Horizontal Panel (9) to the CPU Vertical Panel (11).
Insert Bolts (D) to the CPU Bottom Panel (12), then place the bolts into CPU Vertical Panel (11) and tight the
cam locks on the CPU Vertical Panel (11).
9
1
11
D
2PCS
6X40 MM
Insert Bolts (D) to the back side of the Main Panel (1), then place the
CPU Vertical Panel (11) to the bolts and tight the cam locks on the CPU
Vertical Panel (11).
SCREWS TORNILLOS
SCREWS TORNILLOS
Use Tornillos y arandelas (E&H) para fijar el Panel Horizontal (9) al Panel Vertical de CPU (11) y ajuste los
cerrajes en este panel.
Inserte los Pernos (D) en los agujeros de la parte posterior del Panel
Principal (1), luego coloque el Panel Vertical de CPU (11) sobre los
pernos, y ajuste los cerrajes del Panel Vertical de CPU (11).

P.13
10
11
12
7
3
3
E
4PCS
6X50 MM
2
11
4
2
D
3PCS
6X40 MM
1
Insert the Bolts (D) in the holes of the Main Panel (1) and tight them with the screwdriver, then place the Back
Panel (2) over the Bolts and tight the cam locks on the Back Panel (2).
Use Screws (E) to fix the Back Panel (2) between the Left Vertical Panel (4) & CPU Vertical Panel (11).
Fix the Studs (3) to the back of the Bottom Panel (7) & the CPU Bottom Panel (12).
Use Tornillos (E) para fijar el Panel Posterior (2) entre el Panel Vertical Izquierdo y el Panel Vertical
de CPU (4&11).
Fije los Topes (3) en la parte posterior del Panel de Fondo y del Panel de Fondo de CPU (7&12).
SCREWS TORNILLOS
SCREWS TORNILLOS
RTA-8104
Inserte los Pernos (D) en los agujeros del Panel Principal (1) y aj stelos con el destornillador, luego coloque
el Panel Posterior (2) sobre los pernos, y ajuste los cerrajes en el Panel Posterior (2).
ú

P.14
12
13
13
10
X3
C
3PCS
6X25 MM
16
Left
Right
16
15
G
4PCS
4X14 MM
16
15
Carefully, and with the help of another person, turn the desk upright.
Use Screws (G) to fix the Keyboard Panel (15) to the Slider (16).
Con mucho cuidado, y con la ayuda de otra perona, voltee el mueble hacia arriba.
Use Tornillos (G) para ensamblar el Panel de Teclado (15) con los Deslizadores (16).
Use Screws (C) to fix the Supporting Tubes (13) to the Printer Panel (10).
Use Tornillos (C) para fijar los Tubos de Soporte (13) al Panel de Impresora (10).
SCREWS TORNILLOS
SCREWS TORNILLOS
RTA-8104

P.15
14
1
13 X3
A
3PCS
6X35 MM
15
Use Screws (A) to fix the Supporting Tubes (13) to the Main Panel (1).
Use Tornillos (A) para fijar los Tubos de Soporte (13) al Panel Principal (1).
15
Tight all screws well and enjoy your unit.
Apriete todos los tornillos y disfrute su unidad.
SCREWS TORNILLOS
RTA-8104
15

English
- NO EXPONGA LAS SUPERFICIES A LA LUZ SOLAR DIRECTA,
O A CONDICIONES AMBIENTALES EXTREMAS. ESTE TIPO DE
DAÑOS NO SON CUBIERTOS POR LA GARANTÍA DEL PRODUCTO.
- NO USE SOLVENTES SOBRE LAS SUPERFICIES O TUBOS
ESTRUCTURALES. LAS SUPERFICIES DEBEN SER LIMPIADOS
CON UN JABÓN SUAVE Y AGUA, Y SECADOS IMMEDIATAMENTE
CON UNA TOALLA LIMPIA Y SECA.
- PRODUCTOS QUE SON PESADOS DEBEN LEVANTARSE O
MOVERSE POR AL MENOS 2 PERSONAS, Y TODOS LOS
OBJETOS DEBEN SER REMOVIDOS DEL PRODUCTO.
- DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT, OR
EXTREME ENVIRONMENTAL CONDITIONS. EXPOSURE WILL
DAMAGE THE PRODUCT, WHICH IS NOT COVERED BY THE
WARRANTY.
- DO NOT USE SOLVENTS OVER SURFACES OR STRUCTURAL
TUBES. SURFACES MUST BE CLEANED WITH A SOLUTION OF
A SMOOTH SOAP AND WATER, THEN CLEARED WITH A DRY
TOWEL.
- PRODUCTS THAT ARE HEAVY SHOULD BE LIFTED OR MOVED
BY AT LEAST 2 PERSONS, AND ALL OBJECTS SHOULD BE
REMOVED FROM THE PRODUCT.
CARE AND MAINTENANCE
Spanish

PRODUCT WARRANTY
TECHNI MOBILI DESK WARRANTY
LIMITED 5-YEAR WARRANTY
RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA Products or its
authorized resellers that this product will be free from defects in its workmanship and materials, under normal
use and service conditions, as described herein. "Defects" as used in this warranty
imperfections that impair the use of the furniture or product. RTA products will repair or replace, at is option,
without charge to the original purchaser ‘other than freight from purchaser to RTA Products, only the defective
products or parts for a period of FIVE (5) Years.
Replacement parts can only be supplied if parts are available. Items out of production may be unavailable.
This warranty will be effective for the applicable time period beginning the date of purchase on your original
sales receipt. RTA product’s obligation under this warranty is limited to repairing or replacing products or parts
This warranty is Original Purchaser’s sole remedy for product defects, and this warranty does not extend to
any product, or damage to any product, caused by or attributed to abuse or misuse, products used for
used, maintained, or extended hereunder is in lieu of any and all other warranties, express or implied, including
desks made with PVC Laminate surface should not be exposed to direct sunlight, as it may damage the
material. Damage of this nature is not covered under this warranty.
RTA Products will not be responsible for indirect, special, incidental or consequential damages. This warranty
is limited to merchandise purchased in the Continental United States. Some States do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to
state.
RTA Products will advise you of the procedure to follow in making warranty claims. The following are the
procedures for warranty claims:
a. Call us Monday – Friday, from 9am-5pm (Eastern Time) at [phone] to explain the defect and give
your name, address and phone number. Please have ready the model number of our product, date and place
of purchase. You can also write to us by e-mail to [email protected] and include the same
information.
b. If we determine that replacement will remedy the situation, and in order to determine the extent or the cause
of the defect, purchaser will need to send the part in question at purchaser’s expense. Once we receive the
part, we will examine it and determine whether the claim is valid (or not), and then proceed to send the
replacement. We will ship the replacement at our expense.