Ruijie RG-ES05 Series Installation and operating manual

RG-ES05,ES08 Series Switches
Hardware Installation and Reference Guide
DocumentVersion:V1.1
Date: 2023.5.29
Copyright © 2023RuijieNetworks

Copyright
Copyright © 2023 Ruijie Networks
All rights arereservedin this documentandthis statement.
Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this
document or anyportion of this document, in anyform or by anymeans, without the prior written consent of
RuijieNetworks is prohibited.
Trademarks including, , are ownedby RuijieNetworks.
Allothertrademarks orregisteredtrademarks mentionedinthis documentareownedbytheirrespectiveowners.
Disclaimer
The products,services orfeatures you purchasearesubjecttocommercialcontracts andterms.Someorallof
the products,services orfeatures describedin this documentmaynotbe withinthe scope of yourpurchase or
use.Unless otherwiseagreedinthe contract,RuijieNetworks does notmake anyexpress orimpliedstatement
or guaranteefor the content of this document.
Due to productversion upgrades or other reasons, the content of this document will be updated from time to
time.RuijieNetworks reserves the rightto modifythe content of the documentwithoutanynotice or prompt.
This manual is for referenceonly.Ruijie Networks endeavors to ensurecontentaccuracyandwillnotshoulder
any responsibilityfor lossesanddamagescausedduetocontent omissions,inaccuracies orerrors.

I
Preface
IntendedAudience
This documentis intended for:
Networkengineers
Technical supportandservicing engineers
Networkadministrators
Technical Support
Official Website of RuijieReyee:https://www.ruijienetworks.com/products/reyee
TechnicalSupportWebsite:https://www.ruijienetworks.com/support
CasePortal:https://caseportal.ruijienetworks.com
Community:https://community.ruijienetworks.com
TechnicalSupportEmail:[e-mail]
Conventions
1. Signs
The signs usedinthis documentaredescribedas below:
Danger
An alert that calls attentionto safety operation instructionsthatif not understood orfollowedwhen operating
the device can resultinphysicalinjury.
Warning
An alert that calls attention to importantrules and information thatif not understood orfollowedcan resultin
data loss orequipmentdamage.
Caution
An alert that calls attention to essentialinformation thatifnot understoodorfollowedcan resultinfunction
failureor performancedegradation.
Note
An alertthat contains additional orsupplementaryinformation thatif notunderstoodor followedwill notlead to
serious consequences.
Specification
An alert that contains a descriptionofproductor version support.

II
2. Note
This manualprovides thedeviceinstallationsteps,hardwaretroubleshooting,moduletechnicalspecifications,
andspecifications and usage guidelines forcables andconnectors.Itis intended fortheusers whohavesome
experience in installing and maintaining networkhardware.At thesame time, itis assumedthat theusers are
alreadyfamiliarwiththerelatedterms andconcepts.

i
Contents
Preface............................................................................................................................................. I
1 Product Overview.........................................................................................................................1
1.1 RG-ES05...............................................................................................................................1
1.1.1 Device Specification...................................................................................................1
1.1.2 Product Appearance..................................................................................................2
1.1.3 Heat Dissipation.........................................................................................................3
1.1.4 LEDs..........................................................................................................................3
1.2 RG-ES08...............................................................................................................................4
1.2.1 Device Specification...................................................................................................4
1.2.2 Product Appearance..................................................................................................5
1.2.3 Heat Dissipation.........................................................................................................6
1.2.4 LEDs..........................................................................................................................6
1.3 RG-ES05G............................................................................................................................7
1.3.1 Device Specification...................................................................................................7
1.3.2 Product Appearance..................................................................................................8
1.3.3 Heat Dissipation.........................................................................................................9
1.3.4 LEDs..........................................................................................................................9
1.4 RG-ES08G..........................................................................................................................10
1.4.1 Device Specification.................................................................................................10
1.4.2 Product Appearance................................................................................................11
1.4.3 Heat Dissipation.......................................................................................................12
1.4.4 LEDs........................................................................................................................12

ii
2 Preparation before Installation....................................................................................................14
2.1 Safety Suggestions.............................................................................................................14
2.1.1 Installation...............................................................................................................14
2.1.2 Movement................................................................................................................14
2.1.3 Electricity.................................................................................................................14
2.1.4 Static Discharge Damage Prevention.......................................................................15
2.2 Installation Site Requirements.............................................................................................15
2.2.1 Ventilation................................................................................................................15
2.2.2 Temperature and Humidity.......................................................................................16
2.2.3 Cleanness................................................................................................................16
2.2.4 EMI..........................................................................................................................17
2.3 Installation Tools.................................................................................................................17
3 Product Installation.....................................................................................................................19
3.1 Confirmations before Installation .........................................................................................19
3.2 Installing the 5/8-Port Plastic Series Switches .....................................................................19
3.2.1 Mounting the Switch on the Wall..............................................................................19
3.2.2 Mounting the Switch on a Table................................................................................20
3.3 Checking after Installation...................................................................................................21
3.4 Adding Unmanaged Device to Topology..............................................................................21
3.4.1 Scanning QR-code of Unmanaged Device...............................................................21
3.4.2 Adding Unmanaged Device Manually.......................................................................25
4 System Debugging.....................................................................................................................29
4.1 Startup Check.....................................................................................................................29
4.1.1 Checking before the Device is Powered on..............................................................29

iii
4.1.2 Checking after Program Startup (Recommended)....................................................29
5 Maintenance and Troubleshooting..............................................................................................30
5.1 General Troubleshooting Procedure....................................................................................30
5.2 Troubleshooting Common Faults.........................................................................................30
6 AppendixAConnectors and Connection Media ..........................................................................31
7 Appendix B Lightning Protection.................................................................................................33
8 Appendix C Manufacturers and Models of Power Supplies.........................................................35

Hardware Installation and Reference Guide ProductOverview
1
1 Product Overview
The 5/8-port plastic seriesswitches includethefollowingmodels:
Model
10/100 Base-TX Auto-
sensing Ethernet Port
10/100/1000Base-T
Auto-sensing
Ethernet Port
1000Base-X
SFP Port
Consol
e Port
RG-ES05
5
N/A
N/A
N/A
RG-ES08
8
N/A
N/A
N/A
RG-ES05G
N/A
5
N/A
N/A
RG-ES08G
N/A
8
N/A
N/A
Note
1000Base-Tis downwardcompatiblewith100Base-TXand 10Base-T.
1.1 RG-ES05
1.1.1 Device Specification
Table 1-1 Technical Specifications
Model
RG-ES05
Ports
Supports 510/100Base-TXauto-sensing Ethernetports.
Power Supply
AC input
Rated voltage range: 100 VAC to 240VAC
Maximum voltage range: 90 VAC to 264VAC
Frequency: 50/60 Hz
Rated current: 0.3 A
Adapter output
Ratedvoltage range: 5 VDC
Rated current range:0.6 A
8Appendix C Manufacturers and Models of PowerSupplies
EEE
Not supported
PoE
Not supported

Hardware Installation and Reference Guide ProductOverview
2
Power Consumption
Less than2.5W
Operating
Temperature
0℃to 40℃(32°F to 104°F)
Storage Temperature
-40℃to 70℃(-40°F to 158°F)
Operating Humidity
10%to 90%RH
Storage Humidity
5% to 95%RH
Fan
Not supported
Temperature Warning
Not supported
Accessing Optical
Module Information
Not supported
EMC Standards
GB9254-2008
EN 55032:2015+A11:2020
EN 55035:2017+A11:2020
EN 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
EN 300386 V2.1.1(2016-07)
Security Standards
GB4943-2011
EN 62638-1
Earth Leakage
Current
≤1.5mA
Dimensions
(W x D x H)
108.1mm x 64 mm x 24.8 mm (4.26in. x 2.52in. x 0.98 in.)
Weight
(With Package)
0.19 kg (0.42lbs)
Caution
The RG-ES05 switchis a class Aproduct. In a domesticenvironment,this productmaycauseradio
interferencein whichcase the usermaybe requiredtotake adequatemeasures.
1.1.2 Product Appearance
On the frontpanel, the RG-ES05Ethernet switchprovides five 10/100Base-TXEthernet ports and a DCpower
port.

Hardware Installation and Reference Guide ProductOverview
3
Figure 1-1 Figure 1-1 Appearance of RG-ES05
Front Panel
Figure 1-2 Figure 1-2 Front Panel of RG-ES05
Note:
1. 10/100Base-TXEthernet port
2. RJ45 port status LED
3.System status LED
4. DC powerport
1.1.3 Heat Dissipation
The RG-ES05 adopts natural heat dissipation, thereby ensuring normal function of the device. Maintain a
minimum clearanceof 100 mm (3.94 in.) around thedevice. Itis recommended to cleanthe deviceonce every
3 months to avoid dustfrom blockingvents.
1.1.4 LEDs
LED
Panel
Identification
State
Meaning
System
status
LED
Off
The switchis poweredoff.
Solidon
The switchis operational.