Ruijie RG-S6580-48CQ8QC Installation and operating manual

Ruijie RG-S6580-48CQ8QC Switch
Hardware Installation and Reference Guide
Document Version: V2.0
Date: August 31, 2023
Copyright © 2023 Ruijie Networks

Copyright
Copyright © 2023 Ruijie Networks
All rights are reserved in this document and this statement.
Without the prior written consent of Ruijie Networks, no organization or individual is permitted to reproduce,
extract, back up, modify, or distribute the content of this document in any manner or form. It is also prohibited to
translate the document into other languages or use any or all parts of it for commercial purposes.
and trademarks are owned by Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.
Disclaimer
The products, services, or features that you purchase are subject to commercial contracts and terms. It is
possible that some or all of the products, services, or features described in this document may not be available
for purchase or use. Unless agreed upon otherwise in the contract, Ruijie Networks does not provide any explicit
or implicit statements or warranties regarding the content of this document.
The content of this document is subject to constant change due to product version upgrades or other reasons.
Thus, Ruijie Networks reserves the right to modify the content of the document without prior notice or prompt.
This manual serves solely as a user guide. While Ruijie Networks endeavors to ensure the accuracy and
reliability of the content when compiling this manual, it does not guarantee that the content of the manual is free
of errors or omissions. All information contained in this manual does not constitute any explicit or implicit
warranties.

I
Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
Ruijie Networks website: https://www.ruijienetworks.com/
Online support center: https://ruijienetworks.com/support
Case portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Email support: [email protected]
Live chat: https://www.ruijienetworks.com/rita
Conventions
1. Signs
The signs used in this document are described as follows:
Danger
An alert that contains important safety instructions. Before you work on any equipment, be aware of the
hazards involved and be familiar with standard practices for preventing accidents.
Warning
An alert that calls attention to important rules and information that if not understood or followed can result in
data loss or equipment damage.
Caution
An alert that calls attention to essential information that if not understood or followed can result in function
failure or performance degradation.
Note
An alert that contains additional or supplementary information that if not understood or followed will not lead to
serious consequences.
Specification
An alert that contains a description of product or version support.

II
2. Notes
The manual provides configuration information, including models, port types, and command line interfaces, for
reference purposes only. In the event of any discrepancy or inconsistency between the manual and the actual
version, the actual version shall take precedence.

I
Contents
Preface.................................................................................................................................................. I
1 Overview ........................................................................................................................................... 1
1.1 About the RG-S6580-48CQ8QC...............................................................................................1
1.2 Component Modules..................................................................................................................1
1.3 Chassis ......................................................................................................................................2
1.3.1 Appearance....................................................................................................................2
1.3.2 LEDs ..............................................................................................................................4
1.3.3 Ports...............................................................................................................................5
1.3.4 Cooling...........................................................................................................................6
1.3.5 Technical Specifications.................................................................................................7
1.3.6 Asset Tag........................................................................................................................9
1.4 Power Module..........................................................................................................................10
1.4.1 RG-PA1200I-F..............................................................................................................10
1.5 Fan Module..............................................................................................................................12
1.5.1 M1HFAN II-F................................................................................................................12
1.6 Cables......................................................................................................................................14
1.6.1 Console Cable .............................................................................................................14
1.6.2 Ethernet Cable.............................................................................................................15
1.6.3 Power Cord..................................................................................................................15
1.6.4 Grounding Wire............................................................................................................16
1.7 Pluggable Modules..................................................................................................................17
2 Preparing for Installation................................................................................................................. 18
2.1 Safety Guidelines.....................................................................................................................18

II
2.1.1 General Precautions....................................................................................................18
2.1.2 Chassis-Lifting Guidelines...........................................................................................18
2.1.3 Electricity Safety ..........................................................................................................18
2.1.4 Preventing ESD Damage.............................................................................................19
2.1.5 Laser Safety.................................................................................................................19
2.1.6 Storage Guidelines ......................................................................................................19
2.2 Site Requirements ...................................................................................................................20
2.2.1 Floor Loading...............................................................................................................20
2.2.2 Airflow...........................................................................................................................20
2.2.3 Space...........................................................................................................................20
2.2.4 Temperature.................................................................................................................20
2.2.5 Humidity.......................................................................................................................20
2.2.6 Cleanliness...................................................................................................................21
2.2.7 System Grounding.......................................................................................................22
2.2.8 Preventing Electromagnetic Interference....................................................................23
2.2.9 Surge Protection..........................................................................................................23
2.3 Rack-Mounting Guidelines.......................................................................................................23
2.4 Tools ........................................................................................................................................24
2.5 Unpacking the Switch..............................................................................................................25
2.5.1 Verifying the Shipped Content.....................................................................................25
2.5.2 Unpacking the Container.............................................................................................25
3 Installing the Switch ........................................................................................................................ 27
3.1 Installation Procedure..............................................................................................................28
3.2 Installing the Rack....................................................................................................................29

III
3.2.1 Installation Guidelines..................................................................................................29
3.2.2 Procedure.....................................................................................................................29
3.3 Installing the Chassis...............................................................................................................29
3.3.1 Installation Guidelines..................................................................................................29
3.3.2 Mounting the Brackets.................................................................................................30
3.3.3 Mounting the Chassis on the Rack..............................................................................30
3.4 Installing the Protective Grounding Wire.................................................................................31
3.4.1 Installation Guidelines..................................................................................................31
3.4.2 Procedure.....................................................................................................................31
3.5 Installing and Removing the Fan Module................................................................................32
3.5.1 Installing the Fan Module.............................................................................................33
3.5.2 Removing the Fan Module...........................................................................................33
3.6 Installing and Removing the Power Module............................................................................34
3.6.1 Installing the Power Module.........................................................................................34
3.6.2 Removing the Power Module.......................................................................................35
3.7 Installing the Pluggable Module...............................................................................................36
3.8 Verifying Installation.................................................................................................................36
3.9 Connecting the Power Cord.....................................................................................................36
4 Commissioning................................................................................................................................ 37
4.1 Setting Up the Configuration Environment..............................................................................37
4.2 Powering on the Device...........................................................................................................39
4.2.1 Checklist Before Power-on..........................................................................................39
4.2.2 Power-on......................................................................................................................39
4.2.3 ChecklistAfter Power-on .............................................................................................39

IV
5 Monitoring and Maintenance........................................................................................................... 40
5.1 Monitoring................................................................................................................................40
5.1.1 Monitoring the LEDs....................................................................................................40
5.1.2 Running the CLI Commands.......................................................................................40
5.2 Maintenance ............................................................................................................................40
5.2.1 Replacing the Power Module.......................................................................................40
5.2.2 Replacing the Fan Module...........................................................................................41
5.2.3 Replacing the Lithium Battery......................................................................................41
5.2.4 Replacing the Fuse......................................................................................................41
6 Troubleshooting............................................................................................................................... 42
6.1 Flowchart..................................................................................................................................42
6.2 Common Issues.......................................................................................................................43
6.2.1 Forgetting Login Password..........................................................................................43
6.2.2 AC Power Module Failure............................................................................................43
6.2.3 Fan Module Not Rotating.............................................................................................43
6.2.4 No Output on the Console...........................................................................................43
6.2.5 Garbled Output on the Console...................................................................................43
6.2.6 Optical Port Linkdown..................................................................................................44
7 Appendix.......................................................................................................................................... 44
7.1 Labeling Process.....................................................................................................................44
7.1.1 Hand Writing on Labels................................................................................................44
7.1.2 Pasting Labels .............................................................................................................44
7.1.3 Label Contents.............................................................................................................45
7.2 Connectors and Media.............................................................................................................46

V
7.2.1 100BASE-TX/10BASE-T Port......................................................................................46
7.2.2 1000BASE-T Port ........................................................................................................46
7.3 Surge Protection......................................................................................................................48
7.3.1 Installing an AC PowerArrester...................................................................................48
7.3.2 Installing an Ethernet PortArrester..............................................................................49
7.4 Site Selection...........................................................................................................................51
7.5 Recommended Cabling...........................................................................................................51

Hardware Installation and Reference Guide Overview
1
1 Overview
1.1 About the RG-S6580-48CQ8QC
The RG-S6580-48CQ8QC switch is a next-generation switch featuring high-performance, high-density, and low-
latency launched by Ruijie Networks for Artificial Intelligence (AI) and other applications. The RG-S6580-
48CQ8QC switch delivers high-density 100GE access, 400GE uplink ports, and diverse data center features. It
can be used with Ruijie’s RG-N18000-XH and RG-S6980-64QC switches for a high-performance and high-
reliability data center network.
Table 1-1 RG-S6580-48CQ8QC Overview
Chassis
100GE
DSFP Ports
400GE
QSFP-DD
Ports
Expansion
Module
Slots
Power
Redundancy
Fan
Redundancy
RG-S6580-48CQ8QC
48
8
N/A
1+1
5+1
Note
The product images involved in this manual are for indicative purpose only. The appearance is subject to the
actual equipment.
1.2 Component Modules
The RG-S6580-48CQ8QC adopts the modular design. Compliant with industry standards, the design
differentiates modules and integrates module interfaces to ensure an integrated system with independent
function modules.
Table 1-2 Component Modules
Chassis
Power Module
Fan Module
RG-S6580-48CQ8QC
RG-PA1200I-F
M1HFAN II-F
Caution
Different power modules are interchangeable. That is, the switch allows concurrent AC and High-voltage DC
(HVDC). For example, input 1 uses mains electricity (AC power) and input 2 use Uninterrupted Power Supply
(UPS) HVDC power.