Ruijie RG-NBS3200 Series Installation and operating manual

Ruijie RG-NBS3200 Series Switches
RG-NBS3200-24GT4XS&RG-NBS3200-24SFP/8GT4XS&
RG-NBS3200-24GT4XS-P&RG-NBS3200-48GT4XS&
RG-NBS3200-48GT4XS-P
Hardware Installation and Reference Guide
DocumentVersion:V1.1
Date: 2022-11-16
Copyright © 2023RuijieNetworks

Copyright
Copyright © 2023 Ruijie Networks
All rights arereservedin this documentand this statement.
Without the priorwritten consentof Ruijie Networks,anyorganization orindividual shall notreproduce,extract,
back up,modify, or propagate the content of this document in anymanneror in anyform, or translate it into other
languages orusesome orallparts ofthe documentforcommercialpurposes.
,, and other Ruijienetworks logos aretrademarks ofRuijieNetworks.
All other trademarks or registered trademarks mentioned in this document are owned bytheir respective owners.
Disclaimer
The products,services, or features you purchase are subject to commercial contracts and terms, andsome or all
of the products,services, or features described in this document maynot be available for you to purchase oruse.
Except for the agreementinthe contract, RuijieNetworks makes noexplicitorimplicitstatementsorwarranties
with respectto the contentof this document.
The content of this document will beupdated from time to time due to product version upgrades or other reasons,
RuijieNetworks reserves therightto modifythe content of the documentwithoutanynoticeor prompt.
This manual is designed merelyas auserguide.RuijieNetworks has tried its bestto ensurethe accuracyand
reliabilityof the content whencompiling this manual,butit does notguarantee that the content of the manual is
completelyfree of errors or omissions,and allthe information in this manual doesnotconstituteanyexplicit or
implicitwarranties.

Preface
Thank you for usingourproducts.This manual will guide youthroughtheinstallationofthe device.
This manualdescribesthefunctionalandphysicalfeatures andprovides thedevice installation steps,hardware
troubleshooting,moduletechnicalspecifications,andspecifications andusageguidelines forcables andconnectors.
Audience
It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it
is assumed thatthe users arealreadyfamiliarwiththerelatedterms and concepts.
Obtaining Technical Assistance
RuijieNetworks website:https://www.ruijienetworks.com/
Technical supportwebsite:https://www.ruijienetworks.com/support
Case portal:https://caseportal.ruijienetworks.com
Community:https://community.ruijienetworks.com
Technical supportemail:[e-mail]
Skype: [e-mail]
Related Documents
Document
Description
Configuration Guide
Describes networkprotocolsandrelatedmechanismsthatsupportedbythe
product, withconfiguration examples.
Command Reference
Describes therelatedconfiguration commands,includingcommandmodes,
parameterdescriptions,usage guides,andrelatedexamples.
Conventions
1. Signs
The signs used inthis documentaredescribedas follows.
Warning
An alert that calls attention to importantrules and information thatif not understood orfollowed can resultin
data loss orequipmentdamage.
Caution
An alert that calls attention to essential information thatifnot understood orfollowed can resultin function
failureor performancedegradation.

Note
An alert that contains additional orsupplementaryinformation thatif not understood orfollowed will notlead to
serious consequences.
Specification
An alert that contains a description ofproductor version support.
2. Note
This manualprovides installationsteps,troubleshooting,technicalspecifications,andusageguidelines for
cables and connectors. Itis intended for users whowant to understand theabove and have extensive experience
in networkdeploymentand management,andassumethatusers are familiar withrelatedterms andconcepts.

Ruijie RG-NBS3200 SeriesSwitchesHardware Installation andReferenceGuide Product Overview
4
1 Product Overview
RuijieRG-NBS3200 seriesswitches aremainlyapplicable to the small-andmedium-sized enterprise (SME)networks
to provide services according toservice needs toensure prompttransmission ofkey data. The RG-NBS3200 series
switches providevarious interfaces tomeet different requirements.
RG-NBS3200 Series Switches
Model
10/100/1000
Base-T Ethernet Port
1000Base-XSFP
Port
10G SFP+ Port
Console Port
Power
Supply
RG-NBS3200-2
4GT4XS
24
N/A
4
N/A
Single
RG-NBS3200-2
4SFP/8GT4XS
8 (combo)
24
4
N/A
Single
RG-NBS3200-2
4GT4XS-P
24 (PoE+ support)
N/A
4
N/A
Single
RG-NBS3200-4
8GT4XS
48
N/A
4
N/A
Single
RG-NBS3200-4
8GT4XS-P
48 (PoE+ support)
N/A
4
N/A
Single
1000Base-Tis downwardcompatiblewith100Base-TXand10Base-T.
The combo port consists of one 1000Base-XSFP port and one 10/100/1000Base-T Ethernet port. That is, onlyone
port of them is available at a time.
1.1 RG-NBS3200-24GT4XS
Technical Specifications
Model
RG-NBS3200-24GT4XS
CPU
Built-in CPU, single-coreprocessor,and800MHz
BootROM
N/A
Flash Memory
256MB
SDRAM
DDRIII 512 MB
Optical Module
The coppercable is not supported.See AppendixB.
The supportedmodule type may change at anytime. ConsultRuijie Networks forthe latest
information.
SFP+ Port
10GBase-R
1000Base-X
Power Supply
AC input
Rated voltage range: 100 V to 240 V

Ruijie RG-NBS3200 SeriesSwitchesHardware Installation andReferenceGuide Product Overview
5
Maximum voltage range: 90V to 264 V
Frequency: 50/60 Hz
Rated current: 1.5 A
Input Leakage
Current
≤3.5 mA
EEE
Supported
PoE
Not supported
Power
Consumption
28 W
Temperature
Operating temperature:0°Cto 50°C(32°F to +122°F)
Storage temperature:-40°Cto +70°C(-40°F to +158°F)
Humidity
Operating humidity:10% to 90% RH
Storage humidity: 5% to 95%RH
Fan
Adaptive speedadjustment
Temperature
Alarm
Not supported
Certification
CE
Dimensions
(W x D x H)
440mmx 207.5mmx 43.6 mm(withfront panel )
Weight
2.9 kg
Device operationina residentialenvironmentmaycauseradiointerference.
The device is not suitable forusein locations where childrenarelikelyto bepresent.
Product Appearance
On the front panel,the RG-NBS3200-24GT4XS Ethernet switchprovides twenty-four 10/100/1000Base-TEthernet
ports andfour SFP+ ports.On the back panel,it provides an AC powerport.
Figure 1-1 Appearance of the RG-NBS3200-24GT4XS
Front Panel
Figure 1-2 Front Panel of the RG-NBS3200-24GT4XS

Ruijie RG-NBS3200 SeriesSwitchesHardware Installation andReferenceGuide Product Overview
6
5
Note:
1. Resetbutton
2. System status LED
3. 10/100/1000 Base-TEthernetport
4. 10GE SFP+ port
5.Nameplateonthebottom of the device
The switchrestarts afterthe resetbutton is pressedforless than 2seconds.
The switch restores the default factory settings after the reset button is pressed for more than 5 seconds (until the
status LED blinks).
Back Panel
Figure 1-3 Back Panelof the RG-NBS3200-24GT4XS
Note:
1. Power cord retention clips
2. Three-hole AC powerreceptacle
3. Protective earthing terminal
The device relies on the separateprotectiveearthingterminal.
The device installation mustbe permanentlygrounded.
The device must be intended to be used in a location with equipotential bonding (such as a telecommunication
center, a dedicatedcomputerroom,ora restrictedaccess area).
Heat Dissipation
The RG-NBS3200-24GT4XSadopts side-to-rearheatdissipation,therebyensuringnormal operation.You must
reserve10 cm distancespaceatboth sides andthebackplane of the cabinetto allow airflow. It is recommendedthat
you clean the device onceevery 3 months to avoid dustfrom blockingvents.
Figure 1-4 Flow SchemeofHeat Dissipation

Ruijie RG-NBS3200 SeriesSwitchesHardware Installation andReferenceGuide Product Overview
7
LED
LED
Panel Identification
State
Meaning
System status LED
Status
Off
The switchis not receiving power.
Blinkinggreen
(0.5 Hz)
The switchis running,butis not connected to
RuijieCloud.
Blinkinggreen (10
Hz)
The switchis being upgradedorinitialized.
Solidgreen
The switchis connectedto RuijieCloud.
10/100/1000Base-T
Ethernet port status
LED
1–24
Off
The port is not connected.
Solidgreen
The port is connected at a rate of 10/100/1000
Mbps.
Blinkinggreen
The port is receiving or transmitting traffic.
SFP+ port status
LED
25F–28F
Off
The port is not connected.
Solidgreen
The port is connected.
Blinkinggreen
The port is receiving or transmitting traffic.
1.2 RG-NBS3200-24SFP/8GT4XS
Technical Specifications
Model
RG-NBS3200-24SFP/8GT4XS
CPU
Built-in CPU, single-core processor,and 800 MHz
BootROM
N/A
Flash Memory
256 MB
SDRAM
DDRIII 512 MB
Optical Module
The coppercable is not supported. See AppendixB.
The supported module typemay change at anytime. ConsultRuijie Networksforthe

Ruijie RG-NBS3200 SeriesSwitchesHardware Installation andReferenceGuide Product Overview
8
latestinformation.
SFP Port
100Base-FX
1000Base-X
SFP+ Port
10GBase-R
1000Base-X
Power Supply
AC input
Rated voltage range: 100V to 240V
Maximum voltage range: 90V to 264 V
Frequency: 50/60 Hz
Rated current: 2 A
Input Leakage
Current
≤3.5 mA
EEE
Supported
PoE
Not supported
Power
Consumption
42 W
Temperature
Operating temperature:0°Cto 50°C(32°F to +122°F)
Storage temperature:-40°Cto +70°C(-40°F to +158°F)
Humidity
Operating humidity:10% to 90% RH
Storage humidity: 5% to 95% RH
Fan
Adaptive speed adjustment
Temperature
Alarm
Not supported
Certification
CE
Dimensions
(W x D x H)
440 mm x 267.5mm x 43.6 mm (withfront panel )
Weight
3.35 kg
Device operationina residentialenvironmentmaycauseradiointerference.
The device is not suitableforusein locations wherechildrenare likelyto be present.
Product Appearance
On the front panel,the RG-NBS3200-24SFP/8GT4XS Ethernetswitchprovides 24SFP ports (8 Gigabit combo ports)
and 4 SFP+ ports.On the back panel,it provides anAC powerport.
Figure 1-5 Appearance of the RG-NBS3200-24SFP/8GT4XS

Ruijie RG-NBS3200 SeriesSwitchesHardware Installation andReferenceGuide Product Overview
9
Front Panel
Figure 1-6 Front Panel of the RG-NBS3200-24SFP/8GT4XS
6
Note:
1. Resetbutton
2. System status LED
3. 1000Base-XSFP port
4. Combo port
5. 10GE SFP+ port
6. Nameplateon thebottom of the device
The switchrestarts afterthe resetbutton is pressedforless than 2seconds.
The switch restores the default factory settings after the reset button is pressed for more than 5 seconds (until the
status LED blinks).
Back Panel
Figure 1-7 Back Panel of the RG-NBS3200-24SFP/8GT4XS
Note:
1. Power cord retention clips
2. Three-hole AC powerreceptacle
3. Protective earthing terminal
The device relies onthe separateprotective earthingterminal.
The device installationmustbe permanentlygrounded.