SAFE HOME CLI 810 HF User manual

Alarm system
Safe Home CLI 810 HF.
Alarming system «Total»
Press button and enter your secret code, depending
on programming mode.
The siren of the control panel emits a lot of audibles
signals to conrm the function – only if it’s programmed.
SOS / Alert on the remote control
Press & button simultaneously to trigger an
alert (silent alert).
SOS / Alert on the panel control
Press & button simultaneously to trigger an
alert (silent alert).
Alarming system «Partial»
Press button and enter your secret code, depending
on programming mode.
The siren of the control panel emits a lot of audibles
signals to conrm the function – only if it’s programmed.
Alarming system «Annexe»
Press button and enter your secret code, depending
on programming mode.
The siren of the control panel emits a lot of audibles
signals to conrm the function – only if it’s programmed.
Disarming system «Total and Annexe»
Enter your secret code. (You can enter your code in a
sequence of 20 numbers).
The siren of the control panel emits one audible signal to
conrm the function.
Red indicator ashes
0 = No sound
1 to 7= siren of the
control panel emits an
audible signal
long beep
&Test to do by
customer
Changing code
Adjust the audible beep level
&Sound level
0 to 7
8
Alarming system
«Total»
Disarming
system
Alarming system
«Partial»
5 sec: on wich
mode is the
alarm system
Master code User number
(1 to 9)
New code
(4 digits)
New code
(4 digits)
}SOS+
{
SOS

Without the document «formular for customer» and your keys,
unfortunately we cannot activate your security system.
Please send it with a protected envelope and per registered mail (LSI) to:
Protectas SA, Impasse Colombelle 8 à 1218 Le Grand-Saconnex
Safe Home SA, rue de Genève 70, 1004 Lausanne
tel. [phone] • fax [phone] • www.safehome.ch