Safety 1st HS129 User manual

Complete Magnetic Locking System
HS129, HS130, HS131, HS132, HS133 User Guide
Sistema de traba magnética
HS129, HS130, HS131, HS132, HS133 Guía del Usuario
©2016 Dorel Juvenile. [phone] www.safety1st.com Styles and colors may vary. Los estilos y los colores pueden variar. Made in CHINA. Hecho en CHINA.
Distributed by (distribuido por) Dorel Juvenile Group, Inc., 2525 State St.,Columbus, IN 47201-7494.
Dorel Juvenile Canada, 2855 Argentia Road, Unit 4, Mississauga, ON, L5N 8G6 10/18/16 4358-5306C
Importado y Distribuido en Chile por: Comercial e Industrial Silfa S.A. - San Ignacio 0201 / Parque Industrial Portezuelo Quilicura, Santiago Chile. Fono (562) 2339 9000. En Perú por: Comexa S.A. - Los Libertadores 455 – San Isidro, Lima – Perú. Fono
(511) 4469014. En Centro América, Caribe y Ecuador por: Best Brands Group S.A. – Av. Balboa, Bay Mall Plaza, Planta Baja, local 9, Panamá. - Fono: [phone]. En Colombia por: Baby Universe S.A.S. - Vía 40 No. 77-29, Barranquilla, Colombia -
Fono: [phone]
Importador: DJGM, S.A. DE C.V. Gabriel Mancera No. 1041 Col. Del Valle Delegación Benito Juárez C.P. 03100 México, D.F. R.F.C. DJG140305GN9 Tel. [phone]
Información de seguridad importante
Después de su colocación, verifique que funcione correctamente tirando firmemente de la puerta o
el cajón. Si el pestillo no sujeta firmemente la puerta o el cajón al tirar de estos, ajuste la altura del
pestillo para lograr una unión segura.
Un niño sin supervisión puede ser capaz de inutilizar la protección que ofrece este producto. Para
que este producto funcione efectivamente durante más tiempo, evite que los niños vean como se
opera. Si los niños ven cómo usted libera una traba, un pestillo o una cubierta, podrían aprender más
rápido la manera de inutilizar cualquier tipo de dispositivo de seguridad.
Important Safety Information
Check for security after installation by tugging firmly on the door or drawer. If the latch
does not securely hold the door or drawer when tugged, adjust the latch height to obtain
a secure connection.
Your child will eventually be able to defeat this product. To keep this product effective
for as long as possible, avoid letting children see how you operate child safety devices.
Watching you disengage a lock, latch or cover could enable them to learn sooner how to
defeat it.
ANTES DE COMENZAR:
• Lea todas las instrucciones antes de instalar.
• Guarde estas instrucciones para su uso futuro.
• Retire todo el contenido del embalaje y deseche la caja y/o las bolsas de polietileno.
• Despliegue e identifique todas las piezas.
• No devuelva este producto al lugar donde lo compró. Si falta alguna pieza,
envíe un correo electrónico a [e-mail], llame al Departamento de
Relaciones con el Consumidor al [phone], o envíe un fax al [phone].
También puede visitar nuestro sitio web en www.safety1st.com. Tenga a mano el número
de modelo (HS129, HS130, HS131, HS132, HS133) y el código de fecha (fecha de
fabricación), que se encuentran indicados en el paquete.
• No se recomienda el uso de herramientas eléctricas para la instalación de tornillos.
HERRAMIENTAS NECESARIAS:
• Herramientas necesarias: Taladro de mano o eléctrico, broca de 7/64 pulg.,
destornillador Phillips y un lápiz (no incluidos).
BEFORE YOU BEGIN:
• Read all instructions before installing.
• Keep these instructions for future use.
• Remove all contents from packaging and discard box, and/or poly bags.
• Lay out and identify all parts.
• Do not return this product to the place of purchase. If any parts are
missing, email [e-mail], call Consumer Relations at
[phone], or fax at [phone]. You can also visit our website
at www.safety1st.com. Have the model number ready (HS129, HS130, HS131,
HS132, HS133) and date code (manufacture date) located on package.
• P ower tools are not recommended for screw installation.
TOOLS NEEDED:
Hand drill or power drill, 7/64” drill bit, Phillips head screwdriver & pencil
(not provided).
WARNING:
• DO NOT use this product to guard against toxic and
dangerous substances, or sharp-edged or pointed objects.
Such materials should always be placed “high up” or
otherwise made completely inaccessible to children.
• ADULT INSTALLATION REQUIRED. KEEP SMALL PARTS
AWAY FROM CHILDREN DURING INSTALLATION.
• Keepmagnetickeyoutofreachofchildren.
• Thisproductcontainsmagnets.Swallowedmagnetscan
stick together across intestines, causing serious infections
and death. Seek immediate medical attention if magnets
are swallowed.
AVISO:
• NO utilice este producto para evitar que los niños tengan acceso
a sustancias tóxicas y peligrosas u objetos punzantes y cortantes.
Tales materiales siempre deben colocarse en lugares “altos” u otros
lugares a los que los niños no puedan llegar de ninguna manera.
• REQUIERE INSTALACIÓN POR PARTE DE UN ADULTO. MANTENGA
LAS PIEZAS PEQUEÑAS FUERA DEL ALCANCE DE LOS NIÑOS
DURANTE LA INSTALACIÓN.
• Mantengasiemprelallavemagnéticafueradelalcancede
los niños.
• Esteproductocontieneimanes.Silosimanessontragados,
pueden pegarse entre sí a través de los intestinos y causar
infecciones graves y la muerte. Si los imanes son tragados,
obtenga atención médica inmediatamente.
CAUTION:
• This product is only a deterrent. It is not a substitute for proper
adult supervision. DO NOT use this product if damaged or
broken.
• FOR INDOOR HOME USE ONLY.
PRECAUCIÓN:
• Este producto es sólo un elemento disuasivo. El mismo no reemplaza
la supervisión adecuada por parte de un adulto. Deje de usar la traba
cuando el niño sea suficientemente grande como para destrabarla.
• SOLO PARA USAR EN ESPACIOS CUBIERTOS.
A
A
B
B
E
E
F
F
G
G
H
H
C
C
D
D
Enganche
Traba
Botón de traba/destraba
Indicador de traba SecureTech™
Llave magnética
Tornillos (4 por traba)
Reusable Plantilla de instalación
Magnetic Key Holder
Verde = Trabada
Rojo = Destrabada
B
C
E
A
F
D
Green = Locked
Red = Unlocked
Catch
Latch
Lock/Unlock button
SecureTech™ lock indicator
Magnetic key
Screws (4 per lock)
Reusable installation template
Magnetic key holder
Parts & Features
Piezas y características
G
H
• Hand drill or power drill
• 7/64” drill bit
• Phillips head screwdriver
• Pencil (not provided).
• Taladro de mano o eléctrico
• Broca de 7/64 pulg.
• Destornillador Phillips
• Un lápiz (no incluidos).
TOOLS NEEDED HERRAMIENTAS NECESARIAS

To ensure the magnetic lock works on your door/drawer: NOTE: In the example illustrations the lock may not work because the drawer is too thick.
1 2 43
Before you begin
Before you begin
1 Push button to show
SecureTech™ lock
unlock/green icon.
2 Hold magnetic lock inside
door/drawer.
4 E nsure lock activates (top
button goes down).
3 Place key on opposite side.
Wipe clean. Keep lock dry.
Hand drill or power drill, 7/64” drill bit, Phillips head
screwdriver & pencil (not provided).
To lock cabinet/drawer: Ensure the lock is set to the green
unlock icon, then close the cabinet/drawer. Test to be sure it is
locked.
To unlock: Place the key at the front of the cabinet/door where
the lock is installed (Figure 1). If it doesn’t unlock, try moving the
key, as you may not be holding the key at the correct location.
To disable the lock: set the lock to the red, unlock positon.
TO USE TO CLEAN
TOOLS NEEDED
Limpie con un paño. Mantenga la traba seca.
Taladro de mano o eléctrico, broca de 7/64 pulg.,
destornillador Phillips y un lápiz (no incluidos).
PARA USAR PARA LIMPIAR
HERRAMIENTAS NECESARIAS
To ensure the magnetic lock works on your door/drawer: NOTE: In the example illustrations the lock may not work because the drawer is too thick.
1 2 43
1 Open green unlock
icon.
2 Hold magnetic lock (latch)
inside door/drawer.
4 E nsure lock activates (button
goes down).
3 Place key on opposite side.
1
To lock cabinet/drawer: Ensure the lock is set to the green
unlock icon, then close the cabinet/drawer. Test to be sure it is
locked.
To unlock: Place the key at the front of the cabinet/door where
the lock is installed (Figure 1). If it doesn’t unlock, try moving the
key, as you may not be holding the key at the correct location.
To disable the lock: set the lock to the red, unlock positon.
1
To Fold the Template: Tip: With “A” facing upward, fold each crease upward one at a time to make it easier to fold.
To fold the template: Tip: With “A” facing upward, fold each crease upward one at a time to make it easier to fold.
TEMPLATE
TEMPLATE
TEMPLATE
TEMPLATE
1
1
2
2
3
3
1 Fold tabs and flaps
upward.
1 Fold tabs and flaps
upward.
2 Push tabs through slots,
ensuring that “A” is
underneath.
2 Push tabs through slots,
ensuring that “A” is
underneath.
3 Folded template should look
like this.
3 Folded template should look
like this.
TEMPLATE
TEMPLATE
if the tools needed must be on rst page, ok,
or we can have it here please advise -Jen

CABINET DRAWER
Remove adhesive cover from back of
template. Slide template onto catch.
1a 1b 1b
6 6
5 5
7 7
2 2
4 4
1” (2.5 cm)
Line up template edge A
roughly 1 inch (2.5 cm) away
from center frame (close to
door handle).
Insert template until vertical
edge meets front of cabinet
frame.
Mark 2 CATCH HOLES positions with
pencil.
Screw in catch by hand using a Phillips
head screwdriver.
Remove adhesive cover from back of
template. Slide template onto catch.
Close cabinet door until contact with
adhesive is made. Open door and
ensure template adhesive has stuck.
Mark 2 LATCH HOLES positions with
pencil. Remove template. Do not
dispose of template as you will need to
reuse it for other installations.
Tighten catch screws.
Pre-drill screw holes for catch 3/8 inch
(0.9 cm) deep. We recommend using
a 7/64 drill bit. Be careful not to drill
through cabinet underhaul. NOTE: For
best install, take a position under the
cabinet to drill holes.
Quick tip: Mark your drill-bit with a
piece of electrical tape to correct
depth of 3/8 inch (0.9 cm).
3 3
3/8” (0.9 cm) 3/8” (0.9 cm)
NOTE: Remove drawer if
possible for easier installation.
Line up template edge A
roughly 1 inch (2.5 cm) away
from side of drawer.
Insert template until vertical
edge meets front of cabinet
frame.
Mark2 CATCH HOLES positions with
pencil.
Pre-drill screw holes for catch 3/8 inch
(0.9 cm) deep. We recommend using
a 7/64 drill bit. Be careful not to drill
through drawer underhaul. NOTE: For
best install, take a position under the
cabinet to drill holes.
Quick tip: Mark your drill-bit with a
piece of electrical tape to correct
depth of 3/8 inch (0.9 cm).
Screw in catch by hand using a Phillips
head screwdriver. Put drawer back into
cabinet.
Mark 2 LATCH HOLES positions with
pencil. Remove template.Do not
dispose of template as you will need to
reuse it for other installations.
Tighten catch screws.
Close drawer until contact with
adhesive is made. Open drawer and
ensure template adhesive has stuck.
When closing drawer, if the latch does
not engage the catch, loosen screws
and adjust the latch up or down until
latch engages. Re-tighten screws.
NOTE: Installation is complete. See To
Use section.
Position latch slots centered over
pre-drilled holes. Screw in latch by
hand using a Phillips head screwdriver.
Pre-drill screw holes for latch 3/8 inch
(0.9 cm) deep. We recommend using
a 7/64 drill bit. Be careful not to drill
through drawer.
Quick tip: Mark your drill-bit with a
piece of electrical tape to correct
depth of 3/8 inch (0.9 cm).
When closing door, if the latch does not
engage the catch, loosen screws and
adjust the latch up or down until latch
engages. Re-tighten screws.
NOTE: Installation is complete. See To
Use section.
Position latch slots centered over
pre-drilled holes. Screw in latch by
hand using a Phillips head screwdriver.
88 Pre-drill screw holes for latch 3/8 inch
(0.9 cm) deep. We recommend using
a 7/64 drill bit. Be careful not to drill
through cabinet door.
Quick tip: Mark your drill-bit with a
piece of electrical tape to correct
depth of 3/8 inch (0.9 cm).
NOTE: If drill is too large you can use
extra force to manually tighten the
screws with screwdriver (skip steps
about pre-drilling).
NOTE: If drill is too large you can use
extra force to manually tighten the
screws with screwdriver (skip steps
about pre-drilling).
10 10
99
1a 1” (2.5 cm)
Center frame