Samsara VG34 User manual

Vehicle Gateway
INSTALL GUIDE — LIGHT DUTY
Questions? samsara.com/support
1× 2× 2× 1×
What you’ll need:

2
Samsara CableVehicle port
Connect the Samsara Cable. Vehicle’s diagnostics
remain accessible via the unconnected port.
Samsara port (OBD-II)
5
Connected
Connecting (1-3 mins.)
Indicator Light
Verify the Gateway indicator light turns green.
This could take 1-3 minutes.
3
Vehicle port
Samsara port
Fasten unconnected diagnostics port to vehicle’s
original port location.
1
Vehicle port (OBD-II)
Locate vehicle’s diagnostic port and detach it
from its original location.
4
Samsara Cable
Plug the Samsara Cable gateway connector into
the Gateway. It will click when fully inserted.
6
Ziptie
Fasten connected Gateway in a secure position
behind the dashboard using zipties.