Samsung SHS-6020 Instruction manual

Quick Samsung SHS-6020 User Guide
January 28, 2016.
By: Jeffrey Leung 100899037

Initialization (also known as factory reset)
1. Open Battery Cover
2. Hold the [Register] button for 5 seconds
3. When the number pad is lighted, enter 4560852580 then press [*]
Password Change
*register password after initialization, and remember to hold the door opened*
1. Briefly press the [Register] button
2. Enter the default password after initialization “12345” when the number pad is lighted
and press the [*]
3. Enter a new password (5 to 12 digits) and press the [*] button
4. Re-enter new password and press [*]
Adding a Card or Key Tag
Up to 20 maximum
1. Pressing the [Register] button(from the inside)
2. Entering the password(from the outside) then press [*]
3. Placing the card or key tag on the card reader from the outside
To register more cards: place another card on the reader within 20 seconds of registering
previous cards
Deleting a Card or Key Tag
* All Cards/Key Tags are deleted*
1. Press and hold the [Register] button for 3 seconds
2. Enter the password on the keypad and press [*]
Opening Door from the outside with a password
1. Pressing the [Enter Number] button (Silver button on the bottom of the touchscreen
pad)
2. Enter the two arbitrary buttons that are lighted in order
3. When all the numbers are lighted, enter your password and press [*]

Removing two arbitrary numbers
1. Briefly press the [Register[ button on the inner body
2. Press [7] for Multi-leveled Security code entry mode(two arbitrary numbers)
Or [9] Common mode
3. Press [*], security mode will be set.
Opening Door from the outside with a card or a key tag
1. Place card/key tag on the card reader
2. Door will open after 1 second
Manual Locking Mode
To set manual locking mode, from the inside cover where the battery is located, flick the switch
to “M”.
Press the [Enter Number] Button on the outside
Press the [Close] button on the inside
Automatic Locking Mode
To set automatic locking mode, from the inside cover where the battery is located, flick the
switch to “A”.
The door is automatically locked 2 seconds after the door is closed
Double Authorization Mode(Password + Card/Key tag)
1. Briefly press the [Register] button on the inner body
2. Press [4] for Double authorization on
Or [6] Double authorization off
3. Press [*], authorization mode will be set.
Sound Settings
Changed from inside cover where the battery is located
[0] button: All sounds except the alarm sound are deactivated
[1] button: Weaker
[2] button: Louder