Sauder 2-Door Wardrobe/Armoire Clothes Storage Cabinet With Hanger Rod & Shelves... User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-445-1527.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Sauder.com
Share your journey!
English pg 1-28
Français pg 29-32
Español pg 33-36
Lot # 559598 01/04/21
Purchased: __________________
Wardrobe/Storage Cabinet
Model 429579
Store behind
closed doors.

Part Identification
Hardware Identification
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Table of Contents Assembly Tools Required
3
4
5
6-28
29-32
33-36
37-38
39
Page 2 www.sauder.com/service 429579

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A LEFT END (1)
B RIGHT END (1)
C UPRIGHT (1)
D TOP (1)
E BOTTOM (1)
F RIGHT SHELF (2)
G ADJUSTABLE SHELF (1)
H TOP MOLDING (2)
J BASE (1)
K LEFT SHELF (1)
L LEFT DOOR (1)
M RIGHT DOOR (1)
N DRAWER FRONT (2)
O LEFT DRAWER SIDE (2)
P RIGHT DRAWER SIDE (2)
Q DRAWER BACK (2)
R DRAWER BOTTOM (2)
S BACK (1)
A
B
C
D
E
F
F
G
H
H
J
K
L
M
N
N
O
O
P
P
Q
Q
R
R
S
Page 3www.sauder.com/service429579

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
SHELF REST - 4
10 11 ROD HANGER - 2 LARGE WOOD
DOWEL - 40
12 NAIL - 45 14
SMALL WOOD
DOWEL - 16
13
SILVER 1-1/2" FLAT HEAD SCREW - 8
19
BLACK 1-1/2" FLAT HEAD SCREW - 30
18
HINGE - 6
9
CAM SCREW - 10
7METAL
BRACKET - 2
8
LARGE HIDDEN
CAM - 2
5SMALL HIDDEN
CAM - 8
6
PULL - 4
16
APPLIQUE
CARD - 8
15 ROD -1
17 FURNITURE TIPPING
RESTRAINT KIT - 1
96
RIGHT DRAWER
SLIDE - 2
3
RIGHT CABINET
RAIL - 2
1
Page 4 www.sauder.com/service 429579
LEFT CABINET
RAIL - 2
2LEFT DRAWER
SLIDE - 2
4
1/2" PAN HEAD SCREW - 4
22
5/8" MACHINE SCREW - 8
21
3/4" FLAT HEAD SCREW - 12
20
1/2" FLAT HEAD SCREW - 16
23 5/8" FLAT HEAD SCREW - 12 24

Hardware Usage Guide
HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL
NOTE: Various CAM SCREWS or a CAM DOWEL may be used.
Cam Screws Cam Dowel
Turn the CAM SCREW or
gently tap the CAM DOWEL
until the shoulder is against
the surface of the part.
1.
Hidden Cam
Arrow
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the
edge of the board.
Hole
2.
3.
1
2
Insert the CAM SCREW or CAM DOWEL into the
HIDDEN CAM. Tighten the HIDDEN CAM.
Page 5www.sauder.com/service429579

Step 1 Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code. 0
C
C
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Fasten a ROD HANGER (11) to the UPRIGHT (C). Use two
1/2" FLAT HEAD SCREWS (23) though the outer holes in
the ROD HANGER.
å Turn two CAM SCREWS (7) into the UPRIGHT(C).
å Flip the UPRIGHT (C) over.
å Fasten the LEFT CABINET RAILS (2) to the UPRIGHT (C).
Use six 5/8" FLAT HEAD SCREWS (24).
F
L
I
P
O
V
E
R
7
11
1/2" FLAT HEAD SCREW
(2 used in this step)
23
2
2
Roller end
Page 6 www.sauder.com/service 429579
5/8" FLAT HEAD SCREW
(6 used for the LEFT CABINET RAILS)
24

Step 2
D
D
H
H
å Open the FURNITURE TIPPING RESTRAINT KIT (96)
and fasten the SAFETY STRAP to the TOP (D). Use the
provided SHORT SCREW.
å Fasten the TOP MOLDINGS (H) to the TOP (D). Use eight
BLACK 1-1/2" FLAT HEAD SCREWS (18).
å NOTE: You should start each SCREW a few turns before
completely tightening any of them. 96
Use the SHORT SCREW
from the RESTRAINT KIT.
BLACK 1-1/2" FLAT HEAD SCREW
(8 used in this step)
18
Page 7www.sauder.com/service429579

Step 3
C
D
å Insert four LARGE WOOD DOWELS (12) into the UPRIGHT (C).
å Fasten the TOP (D) to the UPRIGHT (C). Use two BLACK
1-1/2" FLAT HEAD SCREWS (18).
å NOTE: You should start each SCREW a few turns before
completely tightening any of them.
å NOTE: Be sure the WOOD DOWELS in the UPRIGHT
insert into the TOP.
12
Roller end
BLACK 1-1/2" FLAT HEAD SCREW
(2 used in this step)
18
Safety
Strap
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Page 8 www.sauder.com/service 429579

BLACK 1-1/2" FLAT HEAD SCREW
(4 used in this step)
18
å Insert four LARGE WOOD DOWELS (12) into
the UPRIGHT (C).
å Fasten the RIGHT SHELVES (F) to the UPRIGHT (C). Use
four BLACK 1-1/2" FLAT HEAD SCREWS (18).
å NOTE: You should start each SCREW a few turns before
completely tightening any of them.
å NOTE: Be sure the WOOD DOWELS in the UPRIGHT
insert into the RIGHT SHELVES.
Step 4
C
F
F
12
12
This hole
must be here.
This hole must be here.
Unfinished edge
Page 9www.sauder.com/service429579

Step 5
E
12
å Insert two LARGE WOOD DOWELS (12) into the UPRIGHT (C).
å Fasten the BOTTOM (E) to the UPRIGHT (C). Use two
BLACK 1-1/2" FLAT HEAD SCREWS (18).
å NOTE: Be sure the WOOD DOWELS in the UPRIGHT
insert into the BOTTOM.
å Fasten a METAL BRACKET (8) to the upper RIGHT SHELF (F)
and UPRIGHT (C). Use two 1/2" PAN HEAD SCREWS (22).
BLACK 1-1/2" FLAT HEAD SCREW
(2 used in this step)
18
C
This hole
must be here.
F
1/2" PAN HEAD SCREW
(2 used in this step)
22
C
F 8
Page 10 www.sauder.com/service 429579

å Insert two LARGE WOOD DOWELS (12) into the BOTTOM (E).
å Push the BASE (J) onto the LARGE WOOD DOWELS (12) in
the BOTTOM (E).
Step 6
E
J
12
Page 11www.sauder.com/service429579

Step 7
B
Roller end
Use these holes
1
1
Page 12 www.sauder.com/service 429579
å Fasten the RIGHT CABINET RAILS (1) to the RIGHT END (B).
Use six 5/8" FLAT HEAD SCREWS (24).
5/8" FLAT HEAD SCREW
(6 used in this step)
24

Step 8
B
D
H
H
E
J
F
F
å Insert fourteen LARGE WOOD DOWELS (12) into the
RIGHT END (B).
å Fasten the RIGHT END (B) to the TOP (D), BOTTOM (E),
RIGHT SHELVES (F), TOP MOLDINGS (H), and BASE (J).
Use eight BLACK 1-1/2" FLAT HEAD SCREWS (18).
å NOTE: Be sure the WOOD DOWELS in the RIGHT END
insert into the TOP, BOTTOM, RIGHT SHELVES, TOP
MOLDINGS, and BASE.
å NOTE: You should start each SCREW a few turns before
completely tightening any of them.
12
12
(14 used)
BLACK 1-1/2" FLAT HEAD SCREW
(8 used in this step)
18
Page 13www.sauder.com/service429579
1

Step 9
CK
K
1
å Push two LARGE HIDDEN CAMS (5) into the
LEFT SHELF (K).
å Insert two LARGE WOOD DOWELS (12) into the UPRIGHT (C).
å Fasten the LEFT SHELF (K) to the UPRIGHT (C). Tighten
two HIDDEN CAMS.
å NOTE: Be sure the WOOD DOWELS in the UPRIGHT
insert into the LEFT SHELF.
5
Arrow
Surface with
HIDDEN
CAMS
12
This hole
must be
here.
Page 14 www.sauder.com/service 429579

Step 10
K
K
C
C
å Fasten the remaining METAL BRACKET (8) to the upper LEFT
SHELF (K) and UPRIGHT (C). Use two 1/2" PAN HEAD SCREWS (22).
1/2" PAN HEAD SCREW
(2 used in this step)
22
8
Page 15www.sauder.com/service429579

Step 11
A
å Fasten the remaining ROD HANGER (11) to the LEFT END (A).
Use two 1/2" FLAT HEAD SCREWS (23) though the outer holes
in the ROD HANGER.
11
1/2" FLAT HEAD SCREW
(2 used in this step)
23
Page 16 www.sauder.com/service 429579

Step 12
A
K
D
E
J
H
H
å Insert twelve LARGE WOOD DOWELS (12) into the
LEFT END (A).
å Fasten the LEFT END (A) to the TOP (D), BOTTOM (E),
TOP MOLDINGS (H), BASE (J), and LEFT SHELF (K). Use
six BLACK 1-1/2" FLAT HEAD SCREWS (18).
å NOTE: Be sure the WOOD DOWELS in the LEFT END
insert into the TOP, BOTTOM, TOP MOLDINGS, BASE and
LEFT SHELF.
å NOTE: You should start each SCREW a few turns before
completely tightening any of them.
12
12
(12 used)
BLACK 1-1/2" FLAT HEAD SCREW
(6 used in this step)
18
Page 17www.sauder.com/service429579
1

Step 13
S
å Carefully turn your unit over onto its front edges. Unfold
the BACK (S) and lay it over your unit.
å Make equal margins along all four edges of the BACK (S).
Push on opposite corners of your unit if needed to make
it "square".
å Fasten the BACK (S) to your unit using the NAILS (14).
å NOTE: Be sure to tap NAILS into the holes that line up
over the SHELVES (F and K).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfinished surface
NAIL
(45 used in this step)
14
8
These holes must
line up over the
SHELVES (F and K).
Page 18 www.sauder.com/service 429579

Step 14
L
M
å Fasten the HINGES (9) to the DOORS (L and M). Use
twelve 1/2" FLAT HEAD SCREWS (23).
9
9
1/2" FLAT HEAD SCREW
(12 used in this step)
23
Page 19www.sauder.com/service429579

Step 15
G
L
M
å Carefully stand your unit upright.
å Insert the SHELF RESTS (10) into the hole locations of your choice in the RIGHT END (B) and UPRIGHT (C). Set the
ADJUSTABLE SHELF (G) onto the SHELF RESTS.
å Before fastening the DOORS to your unit, be sure the mounting screw is against the outer end of the slot as shown in
the right diagram. If it isn't, loosen the adjusting screw and mounting screw to slide it against the end of the slot. Then
tighten the mounting screw.
å Fasten the LEFT DOOR (L) to the LEFT END (A). Use the SCREWS in the HINGES.
å Fasten the RIGHT DOOR (M) to the RIGHT END (B). Use the SCREWS in the HINGES.
å Fasten two PULLS (16) to the DOORS (L and M). Use four 5/8" MACHINE SCREWS (21).
Mounting
screw
Slot
Hinge
Adjusting
screw
5/8" MACHINE HEAD SCREW
(4 used in this step)
21
10
10
(4 used)
16
16
A
B
C
Page 20 www.sauder.com/service 429579
17