Sauder 423731 User manual

sauder.com
5-Shelf Bookcase
with Doors
Model 423731
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-18
Français pg 19-21
Español pg 22-24
Lot # 531892 07/22/19
Purchased: __________________
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Share your journey!
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-445-1527.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Deep shelves for
tall tales.

Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
Table of Contents Assembly Tools Required
2-3
4
5-18
19-21
22-24
25-26
27
Page 2 www.sauder.com 423731
Now you know
our ABCs.
Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
A UPPER RIGHT END (1)
B UPPER LEFT END (1)
C LOWER RIGHT END (1)
D LOWER LEFT END (1)
E TOP (1)
F BOTTOM (1)
G SHELF (1)
H ADJUSTABLE SHELF (2)
I DOOR (2)
J ADJUSTABLE SHELF MOLDING (2)
K VALANCE (1)
L SHELF MOLDING (1)
M BASE (1)
N UPPER END MOLDING (2)
O DOOR ADJUSTABLE SHELF (1)
P LARGE BACK (1)
Q SMALL BACK (1)

Part Identification
Page 3www.sauder.com423731
E
F
B
A
D
C
G
H
K
L
M
N
P
Q
J
H
J
N
O
I
I

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
Page 4 www.sauder.com 423731
FURNITURE TIPPING RESTRAINT KIT - 1
99
HIDDEN CAM - 37
1
7TACK GLIDE - 4
SILVER 1-1/2" FLAT HEAD SCREW - 4
10
CAM SCREW - 37
2METAL PIN - 12 3
HINGE - 4
4
8BUMPER CARD - 1
PULL - 2
5
SILVER 11/16" MACHINE SCREW - 4
11
NAIL - 46
6
APPLIQUE CARD - 4
9
SILVER 1/2" PAN HEAD SCREW - 16
12

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Push thirty-seven HIDDEN CAMS (1) into the ENDS (A, B, C,
and D), TOP (E), BOTTOM (F), SHELF (G), and
ADJUSTABLE SHELVES (H).
Page 5www.sauder.com423731
Some assembly
(and snacks) required.
E
F
B
A
D
C
G
H
H
Arrow
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Hole
Arrow
1
1
Arrow
1
Arrow
Arrow
1
(37 used)

Step 2
Page 6 www.sauder.com 423731
å Turn thirty-seven CAM SCREWS (2) into the exact holes
shown in the ENDS (A, B, C, and D), SHELF (G), SHELF
MOLDINGS (J and L), VALANCE (K), BASE (M), and UPPER
END MOLDINGS (N).
2
B
A
D
C
G
K
L
M
N
J
J
N
(37 used)
Do not use the
through holes.

Step 3
Page 7www.sauder.com423731
å Fasten the UPPER ENDS (A and B) to the TOP (E). Tighten
four HIDDEN CAMS. 1
2
E
B
A
Surface with HIDDEN CAMS
Surface with HIDDEN CAMS
Surface without HIDDEN CAMS
Edge with HIDDEN CAMS
Edge with HIDDEN CAMS
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Finished edge

Step 4
Page 8 www.sauder.com 423731
å Fasten the SHELF (G) to the UPPER ENDS (A and B). Use
four SILVER 1-1/2" FLAT HEAD SCREWS (10).
SILVER 1-1/2" FLAT HEAD SCREW
(4 used in this step)
10
B
A
G
Edge with HIDDEN CAMS
Surface with HIDDEN CAMS
Finished edge

Step 5
Page 9www.sauder.com423731
å Fasten the LOWER ENDS (C and D) to the
BOTTOM (F). Tighten four HIDDEN CAMS.
F
D
C
Surface with HIDDEN CAMS
Surface with HIDDEN CAMS
Surface without HIDDEN CAMS
Edge with
HIDDEN CAMS
Edge with
HIDDEN CAM

Step 6
Page 10 www.sauder.com 423731
å Fasten the LOWER ENDS (C and D) to the SHELF (G).
Tighten four HIDDEN CAMS.
D
C
G
Just think. The sooner
you do this, the sooner
you do something else.