Sauder 411614 User manual

NOTE
register your new purchase online
www.sauder.com
For immediate service,
our website is available
24 hours a day, 7 days a week
to order replacement parts,
access assembly tips,
register your product,
and view Sauder products.
Mon-Fri - 9am-5:30pm ET
United States and Canada (except holidays)
Consumer Services 1-800-523-3987
DO NOT RETURN YOUR UNIT
TO THE STORE
Contact us first
Most replacement parts ship from our
facility in one or two business days.
www.sauder.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
The back pages of this book are Spanish instructions.
Se incluyen las instrucciones en español en el dorso
de este folleto. Para facilitar su uso, se puede
desprenderlas fácilmente.
Record the date you purchased this unit and save the booklet for
future reference.
If you ever need to contact Sauder about this unit, refer to the lot #
and the model # when calling our toll-free number. For more
information about our furniture, company, or to order replacement
parts, please visit our web site.
08 / 16 / 11
Lot #: 340743
Date Purchased: ____________
Computer Armoire
Model # 411614
Assembly Instructions

PARTS IDENTIFICATION
While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help
While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help
distinguish similar parts from each other. Use this
distinguish similar parts from each other. Use this
PARTS IDENTIFICATION
PARTS IDENTIFICATION
to help identify similar parts.
to help identify similar parts.
ITEM DESCRIPTION QTY
A RIGHT END 1
B LEFT END 1
C LARGE UPRIGHT 1
D SMALL UPRIGHT 1
E TOP 1
F SHELF 1
G LOWER SHELF 1
H KEYBOARD SHELF 1
ILARGE ADJUSTABLE
SHELF 1
JSMALLADJUSTABLE
SHELF 2
K BOTTOM 1
L BACK 1
M DOOR 2
N FRONT MOLDING 1
O RIGHT MOLDING 1
P LEFT MOLDING 1
Q FRONT SKIRT 1
R SIDE SKIRT 2
S BRACE 1
A
B
D
E
F
G
H
K
L
M
M
NO
QR
R
S
IJ
C
P
411614

HARDWARE IDENTIFICATION
METAL BRACKET - 12
Y
TWIST-LOCK® FASTENER - 10
X
CORD CLIP - 1
GG
RUBBER SLEEVE - 12
ZMETAL PIN - 12 AA PULL - 2 BB
MOLDING CONNECTOR - 2
CC HINGE - 4 DD MAGNETIC CATCH - 2 EE
STRIKE PLATE - 2
FF
411614
35AW CABINET RIGHT - 1 35AX CABINET LEFT - 1 35AY DRAWER RIGHT - 1
35AZ DRAWER LEFT - 1

SCREWS SHOWN ACTUAL SIZE
SCREWS SHOWN ACTUAL SIZE
Using a SCREW that is too long will caus
Using a SCREW that is too long will caus
e
e
d
d
a
a
mage. Before beginning assembly, separate
mage. Before beginning assembly, separate
each type of SCREW. Carefully study the SCREW diagrams below
each type of SCREW. Carefully study the SCREW diagrams below
(
(SHOWN ACTUAL SIZE
)
)
.
.
Pay close attention to the color of each SCREW. You may receive extra hardware with your unit.
Pay close attention to the color of each SCREW. You may receive extra hardware with your unit.
1
STRAIGHT EDGE SCREWDRIVER HAMMER
TIP SHOWN ACTUAL SIZE
NO. 2 PHILLIPS SCREWDRIVER
ASSEMBLY TOOLS REQUIRED
BLACK 1-7/8" FLAT HEAD SCREW - 12
HH BLACK 1-1/8" PAN HEAD SCREW - 2 II
SMALL BROWN 1" FLAT HEAD SCREW - 4
KK
LARGE BROWN 1" FLAT HEAD SCREW - 7
JJ
SILVER 5/8" MACHINE SCREW - 4
LL BLACK 9/16" LARGE HEAD SCREW - 40 MM
GOLD 5/16" FLAT HEAD SCREW - 4
OO
BLACK 1/2" FLAT HEAD SCREW - 2
NN
NAIL - 45
PP
411614

www.sauder.com/services
2Look for this icon. It means a video assembly tip is available at:
www.sauder.com/services/tips
Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
To begin assembly, push a SAUDER TWIST-LOCK® FASTENER (X) into the large holes in the LARGE UPRIGHT (C),
SMALL UPRIGHT (D), SHELF (F), and LOWER SHELF (G).
NOTE: Do not tighten the TWIST-LOCK®FASTENERS at this time.
X
C
411614

www.sauder.com/services
3
Tap two MOLDING CONNECTORS (CC) into the notches in the MOLDINGS (N, O, and P).
Fasten the CABINET RIGHT (35AW) and CABINET LEFT (35AX) to the ENDS (Aand B). Use four GOLD 5/16" FLAT
HEAD SCREWS (OO).
A
B
OO
GOLD 5/16” FLAT HEAD SCREW
(4 used in this step)
Roller End
Finished
edge
Finished
edge
411614
Roller End
Use your hammer to tap the MOLDING CONNECTOR (CC) into the notches in the MOLDINGS.
Flat end
Flat end
N
O
P
CC CC

www.sauder.com/services
4
411614
How to use the SAUDER TWIST-LOCK®FASTENER (Refer to the enlarged diagram.)
1. Insert the dowel end of the FASTENER into the hole of the adjoining part.
NOTE: The dowel end of the FASTENER must remain fully inserted in the hole of the adjoining part while locking the
FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight as possible.
Fasten the SHELF (F) and LOWER SHELF (G) to the LEFT END (B). Tighten four TWIST-LOCK®FASTENERS.
Fasten the LEFT MOLDING (P) to the LEFT END (B). Use two BLACK 1-7/8" FLAT HEAD SCREWS (HH).
HH
BLACK 1-7/8” FLAT HEAD SCREW
(2 used in this step)
B
F
G
P
Unfinished
surface
Unfinished
surface
Finished
edge
Curved
edge
Finished
surface

www.sauder.com/services
5
HH
BLACK 1-7/8” FLAT HEAD SCREW
(2 used in this step)
Fasten the SMALL UPRIGHT (D) to the LOWER SHELF (G). Tighten two TWIST-LOCK®FASTENERS.
Fasten the LARGE UPRIGHT (C) to the SHELF (F). Use two BLACK 1-7/8" FLAT HEAD SCREWS (HH).
D
G
Finished
edge
C
F
411614
Finished
edge

www.sauder.com/services
6
411614
A
E
EE
BLACK 1-1/8” PAN HEAD SCREW
(2 used for the MAGNETIC CATCHES)
II
LARGE BROWN 1” FLAT HEAD SCREW
(7 used for the TOP)
JJ
HH
BLACK 1-7/8” FLAT HEAD SCREW
(2 used for the RIGHT END)
Before beginning this step, separate the LARGE BROWN 1" FLAT HEAD SCREWS (JJ) and SMALL BROWN 1" FLAT
HEAD SCREWS (KK). Do not confuse these SCREWS.
Fasten the RIGHT END (A) to the SHELF (F) and RIGHT MOLDING (O). Tighten two TWIST-LOCK®FASTENERS
in the SHELF. Use two BLACK 1-7/8" FLAT HEAD SCREWS (HH) through the outer holes in the MOLDING and into the
RIGHT END.
Fasten the TOP (E) to the LARGE UPRIGHT (C) and MOLDINGS (N, O, and P). Tighten two TWIST-LOCK®
FASTENERS in the LARGE UPRIGHT. Use seven LARGE BROWN 1" FLAT HEAD SCREWS (JJ) through the MOLDINGS
and into the TOP.
 Fasten two MAGNETIC CATCHES (EE) to the FRONT MOLDING (N). Use two BLACK 1-1/8" PAN HEAD SCREWS (II).
N
P
O
Long
finished
edge
C
F
Finished
edge

www.sauder.com/services
7
HH
BLACK 1-7/8” FLAT HEAD SCREW
(6 used for the RIGHT END)
Fasten the BOTTOM (K) to the ENDS (Aand B) and SMALL UPRIGHT (D). Use six BLACK 1-7/8" FLAT HEAD
SCREWS (HH).
K
A
B
D
411614
Finished
edge
Unfinished
surface