Sauder Office Works Affirm 426274 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Sauder.com
Share your journey!
English pg 1-12
Français pg 13-14
Español pg 15-16
AFFIRM COLLECTION
Lot # 572550 10/29/21
Purchased: __________________
Desk 60” x 24”
Classic Cherry finish | Model 426274
How can we help you? To reach our customer service, visit sauder.com/commercial-oce/service
to chat with a live rep or email us.
Prefer the phone? Give us a ring at
877-996-7539 .
Our award-winning team is available Monday-Friday - 8:30 a.m. to 5 p.m. EST (except holidays).

Table of Contents Assembly Tools Required
Part Identification
Hardware Identification
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
3
4
6
5-12
13-14
15-16
17-18
19
426274 www.sauder.com/commercial-oce/servicePage 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A RIGHT END (1)
B LEFT END (1)
C SMALL END (1)
D MODESTY PANEL (1)
E TOP (1)
A
BC
D
E
426274www.sauder.com/commercial-oce/service Page 3

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
9M TOUCH-UP PEN - 1
2P GROMMET - 2 3P GROMMET
CAP - 2 9P CORD CLIP - 2
42F WOOD DOWEL - 13
TWIST-LOCK®
FASTENER COVER - 15
114P106P SMALL HOLE
PLUG - 2
46E LEVELER - 6
LARGE HOLE
PLUG - 8
15P
426274 www.sauder.com/commercial-oce/servicePage 4

Optional Accessories (sold separately)
å This piece of furniture accommodates one or more of the following optional accessories (sold separately).
å Powered Grommet (Item 427829)
The Powered Grommet is designed to replace any existing grommet provided with your furniture.
å To purchase the Powered Grommet, scan this QR code. (Or go to sauder.com)
å Articulating Keyboard Shelf (Item 426468)
The Articulating Keyboard Shelf is designed to be fastened to the underside of your desk, desk return, or credenza top.
å To purchase the Articulating Keyboard Shelf, scan this QR code. (Or go to sauder.com)
426274www.sauder.com/commercial-oce/service Page 5

Step 1
D
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Insert four WOOD DOWELS (42F) into the
MODESTY PANEL (D).
å NOTE: You may need to gently tap the WOOD
DOWELS in with your hammer.
2
42F
42F
Just think. The sooner
you do this, the sooner
you do something else.
426274 www.sauder.com/commercial-oce/servicePage 6

Hardware Usage Guide
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Dowel end
2.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
1.
HOW TO USE A TWIST-LOCK®FASTENER
Step 2
å Using your hammer, gently tap four LEVELERS (46E)
completely into the holes in the ENDS (A and B).
å NOTE: Adjustments to the LEVELERS will be made later in
assembly once your unit is standing upright.
å Insert four WOOD DOWELS (42F) into
the ENDS (A and B).
å NOTE: You may need to gently tap the WOOD
DOWELS in with your hammer.
å NOTE: The SMALL END (C) is not used in
this assembly.
B
A
46E
(4 used)
(4 used)
42F
2
Edge with TWIST-LOCK® FASTENERS
426274www.sauder.com/commercial-oce/service Page 7

Step 3
å Fasten the ENDS (A and B) to the MODESTY PANEL (D).
Tighten six TWIST-LOCK® FASTENERS.
å NOTE: Be sure the WOOD DOWELS in the MODESTY
PANEL insert into the ENDS.
2
A
B
D
Edge with TWIST-LOCK® FASTENERS
Surface with TWIST-LOCK® FASTENERS
Surface with
TWIST-LOCK®
FASTENERS
Surface without
TWIST-LOCK®
FASTENERS
For support, place packing
foam or books here.
426274 www.sauder.com/commercial-oce/servicePage 8

Step 4
å Push two CORD CLIPS (9P) into the holes shown in the TOP (E).
å NOTE: The CORD CLIPS are used to hold cords against the TOP.
9P
E
Pilot hole to be used
only if you purchased
the optional
426468 Articulating
Keyboard Shelf.
426274www.sauder.com/commercial-oce/service Page 9

å Insert three WOOD DOWELS (42F) into the
MODESTY PANEL (D).
å NOTE: You may need to gently tap the WOOD DOWELS
in with your hammer.
å Fasten the TOP (E) to the ENDS (A and B) and MODESTY
PANEL (D). Tighten seven TWIST-LOCK® FASTENERS.
å NOTE: Be sure the WOOD DOWELS in the ENDS and
MODESTY PANEL insert into the TOP.
Step 5
E
A
B
D
42F
(3 used)
2
Pro Tip: Lift with your
legs. And, you know,
your arms.
426274 www.sauder.com/commercial-oce/servicePage 10