Sauder worksense MASON PEAK Credenza 427805 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Sauder.com
Share your journey!
How can we help you? To reach our customer service, visit sauder.com/oceservice to chat with a
live rep or email us.
Prefer the phone? Give us a ring at
877-996-7539 .
Our award-winning team is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays).
English pg 1-18
Français pg 19-21
Español pg 22-24
Lot # 560589 03/11/21
Purchased: __________________
Credenza
Prime Oak finish | Model 427805
MASON PEAK COLLECTION

Table of Contents Assembly Tools Required
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Part Identification
Hardware Identification
Optional Accessories
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
3
4-5
6
7
7-18
19-21
22-24
25-26
27
427805 www.sauder.com/oceservicePage 2
Tape Measure

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
B SMALL DRAWER (1)
C DRAWER (1)
D LARGE DRAWER (1)
G TOP (1)
H TOP MOLDING (2)
M MODESTY PANEL (1)
O ADJUSTABLE SHELF (1)
P RIGHT PEDESTAL BOTTOM (1)
Q TOP BRACE (2)
T DOOR
YY RIGHT PEDESTAL
ZZ LEFT PEDESTAL
G
H
H
M
P
O
Q
Q
RIGHT PEDESTAL
LEFT PEDESTAL
427805www.sauder.com/oceservice Page 3

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
15F WOOD DOWEL - 4 1F HIDDEN CAM - 4
8B FILE ROD - 2
6B FILE GLIDE - 2
SHELF REST - 4
10R HOLE PLUG - 2
107P
75P CAM
COVER - 4
10P SMALL
GROMMET - 1
2P LARGE
GROMMET - 2 3P GROMMET
CAP - 2
191K PULL - 5
3G TIE PLATE - 2
40F LONG
DOWEL - 4 23J KEY SET - 1
LOCK MECHANISM
SET - 4
193M
427805 www.sauder.com/oceservicePage 4

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
1S BLACK 9/16" LARGE HEAD SCREW - 4 10S SILVER 1-1/8" FLAT HEAD SCREW - 8
39S GRAY 1-3/8" MACHINE SCREW - 2
37S BLACK 7/8" MACHINE SCREW - 8
BLACK 15/16" SHOULDER SCREW - 4
144S
147S BLACK 2-9/16" FLAT HEAD SCREW - 2
427805www.sauder.com/oceservice Page 5
16S BLACK 1-7/8" PAN HEAD SCREW - 3

å This piece of furniture accommodates one or more of the following optional accessories (sold separately).
Optional Accessories (sold separately)
å Powered Grommet (Item 427829)
The powered grommet is designed to replace any existing grommet provided with your furniture.
å To purchase the Powered Grommet, scan this QR code. (Or go to sauder.com)
å LED Light (Item 426494)
The LED Light is designed to be fastened to the underside of a hutch.
å To purchase the LED Light, scan this QR code. (Or go to sauder.com)
427805 www.sauder.com/oceservicePage 6

Hardware Usage Guide
1
Step 1 Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
å Assemble your unit on a carpeted floor or on the empty carton
to avoid scratching your unit or the floor.
å Push four HIDDEN CAMS (1F) into the MODESTY PANEL (M).
HOW TO USE A HIDDEN CAM & LONG DOWEL
Arrow
Small end
Hidden Cam
Long Dowel
Start Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
3.
1. Push a HIDDEN CAM into the
part. The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Hole
2. Insert the small end
of the LONG DOWEL
into the HIDDEN CAM.
1F
1F
Arrow
Arrow
M
427805www.sauder.com/oceservice Page 7

å Fasten a TOP MOLDING (H) to the MODESTY PANEL (M).
Use two BLACK 2-9/16" FLAT HEAD SCREWS (147S).
å NOTE: You should start each SCREW a few turns before
completely tightening any of them.
Step 2
M
H
BLACK 2-9/16" FLAT HEAD SCREW
(2 used in this step)
147S
Angled edge
427805 www.sauder.com/oceservicePage 8
Some assembly
(and snacks) required.

å Insert two LONG DOWELS (40F) through the panel in the LEFT PEDESTAL.
å Insert two WOOD DOWELS (15F) into the LEFT PEDESTAL.
å NOTE: You will need someone's help to hold the MODESTY PANEL (M) till it is fastened to the RIGHT PEDESTAL.
å Fasten the MODESTY PANEL (M) to the LEFT PEDESTAL. Tighten two HIDDEN CAMS around the small ends of the
LONG DOWELS.
å NOTE: Be sure the WOOD DOWELS in the LEFT PEDESTAL insert into the MODESTY PANEL.
Step 3
M
H
15F
40F
Small end
LEFT PEDESTAL
Surface with HIDDEN CAMS
427805www.sauder.com/oceservice Page 9
1

å Insert two LONG DOWELS (40F) through the panel in the RIGHT PEDESTAL.
å Insert two WOOD DOWELS (15F) into the RIGHT PEDESTAL.
å Fasten the RIGHT PEDESTAL to the MODESTY PANEL (M). Tighten two HIDDEN CAMS around the
small ends of the LONG DOWELS.
å NOTE: Be sure the WOOD DOWELS in the RIGHT PEDESTAL insert into the MODESTY PANEL.
å Insert the SMALL GROMMET (10P) into the large hole in the RIGHT PEDESTAL.
å Using your hammer, gently tap a CAM COVER (75P) onto each visible HIDDEN CAM.
Step 4
MRIGHT PEDESTAL
40F
Small end
15F
15F
10P
75P
1
427805 www.sauder.com/oceservicePage 10