Sauder Library 412177 User manual

NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-9
Français pg 10-12
Español pg 13-15
Lot # 360888 03/11/14
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
Library
Model 412177
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
Here's one for
the books.

Table of Contents Assembly Tools Required
3
4
5-9
10-12
13-15
16-18
19
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
412177 www.sauder.com/servicesPage 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
A RIGHT END (1)
B LEFT END (1)
C TOP (1)
D BOTTOM (1)
E ADJUSTABLE SHELF (3)
F BACK (1)
G BASE (1)
H TOP MOLDING (1)
I SHELF (1)
412177www.sauder.com/services Page 3
A
B
C
D
E
F
G
H
I
E
E

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
ANGLE BRACKET - 5
K
BLACK 9/16" LARGE HEAD SCREW - 11
O
BLACK 1-5/8" PAN HEAD SCREW - 3
Q
JTWIST-LOCK®FASTENER - 12 RUBBER SLEEVE - 12 L
METAL PIN - 12
M
NAIL - 54
P
HOLE PLUG - 3
R
412177 www.sauder.com/servicesPage 4
SAFETY BRACKET - 1
S
BLACK 1-7/8" PAN HEAD SCREW - 1
T

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å To begin assembly, push a SAUDER TWIST-LOCK®
FASTENER (J) into the large holes in the ENDS (A and B).
å Repeat this step for the BOTTOM (D) and SHELF (I).
412177www.sauder.com/services Page 5
(12 used)
Do not tighten the TWIST-LOCK® FASTENERS in this step.
J
A
B
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1736
to watch a video on how to assemble your unit.