Sauder Portage Park 426294 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-445-1527.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Sauder.com
Share your journey!
Enlish p 1-18
Français p 19-21
Español p 22-24
Lot # 560522 01/19/21
Purchased: __________________
Library Hutch
Portae Park Collection | Model 426294
For things 'n such.

Part Identification
Hardware Identification
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Table of Contents Assembly Tools Required
3
4
5
6-18
19-21
22-24
25-26
27
Electric drill with
1/8" or 3/8" bit
(ONLY in indicated step)
Pencil
Pae 2 www.sauder.com/service 426294

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A TOP (1)
B LEFT END (1)
C RIGHT END (1)
D SHELF (2)
E BACK (1)
F BRACE (1)
A
B
C
D
D
E
F
Pae 3www.sauder.com/service426294

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
2CAM SCREW - 8HIDDEN CAM - 8 1BACK CONNECTOR - 8 4
METAL PIN - 8
5
WOOD DOWEL - 2
3
APPLIQUE CARD - 2
6FURNITURE TIPPING
RESTRAINT KIT - 1
96
1-9/16" PAN HEAD SCREW - 4
79/16" FLAT HEAD SCREW - 8
8
Pae 4 www.sauder.com/service 426294

Hardware Usage Guide
HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL
NOTE: Various CAM SCREWS or a CAM DOWEL may be used.
Cam Screws Cam Dowel
Turn the CAM SCREW or
gently tap the CAM DOWEL
until the shoulder is against
the surface of the part.
1.
Hidden Cam
Arrow
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the
edge of the board.
Hole
2.
3.
1
2
Insert the CAM SCREW or CAM DOWEL into the
HIDDEN CAM. Tighten the HIDDEN CAM.
Pae 5www.sauder.com/service426294

Step 1
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
å Turn four CAM SCREWS (2) into the ENDS (B and C).
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code. 1
B
C
2
Pae 6 www.sauder.com/service 426294

å Push eiht HIDDEN CAMS (1) into the ENDS (B and C)
and BRACE (F).
Step 2 1
B
F
C
1
Arrow
1
Arrow
Pae 7www.sauder.com/service426294

Step 3
å Fasten the BRACE (F) to the LEFT END (B). Tihten two
HIDDEN CAMS.
B
F
1
Surface with
HIDDEN CAMS
Pae 8 www.sauder.com/service 426294

å Fasten the RIGHT END (C) to the BRACE (F). Tihten two
HIDDEN CAMS.
Step 4
F
C
1
Pae 9www.sauder.com/service426294

Step 5
å Carefully stand your unit upriht.
å Slide the BACK (E) into the grooves in the ENDS (B and C)
and BRACE (F).
Finished
surface
With the palm of your hand,
tap the BACK down into
the roove.
B
C
E
F
Pae 10 www.sauder.com/service 426294