Sauder Steel River 423976 User manual

Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-445-1527.
Share your journey!
Business or pleasure.
Works both ways.
sauder.com
L-Desk
Steel River Collection | Model 423976
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
Enlish p 1-34
Français p 35-39
Español p 40-44
Lot #: 522270
Date Purchased: __________________
10/11/18
Be sure to ive us a rin before
makin any returns. 1-800-445-1527

Table of Contents Assembly Tools Required
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
3
4
5-34
35-39
40-44
45-46
47
Pae 2 www.sauder.com 423976

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the ede
to help distinuish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A LEFT LEG (1)
B LEFT BACK (1)
C LEFT TOP (1)
D RIGHT TOP (1)
E RIGHT BACK (1)
F UPRIGHT (1)
G UPRIGHT LEG (1)
H RIGHT END (1)
J RIGHT END LEG (1)
K LEFT BACK BRACE (1)
L LEFT LOWER BRACE (1)
M RIGHT BACK BRACE (1)
N RIGHT LOWER BRACE (1)
O LEFT FRONT BRACE (1)
P RIGHT FRONT BRACE (1)
Q SHORT BRACE (3)
R EXTENSION BLOCK (4)
S SMALL DRAWER FRONT (1)
T SMALL LEFT DRAWER SIDE (1)
U SMALL DRAWER BACK (1)
V SMALL RIGHT DRAWER SIDE (1)
W LARGE DRAWER FRONT (1)
X LARGE LEFT DRAWER SIDE (1)
Y LARGE DRAWER BACK (1)
Z LARGE RIGHT DRAWER SIDE (1)
AA SMALL DRAWER BOTTOM (1)
BB LARGE DRAWER BOTTOM (1)
CC SMALL BACK (1)
DD SHELF (1)
EE CORNER LEG (1)
A
B
C
D
E
F
G
H
J
K
L
M
N
O
P
Q
Q
Q
R
RR
S
TU
V
W
XY
Z
AA
BB
Pae 3www.sauder.com423976
CC
DD
EE

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
BLACK 1" FLAT HEAD SCREW - 16
19
BLACK 1" MACHINE SCREW - 2
20
BLACK 1/2" PAN HEAD SCREW - 19
22 BLACK 1/2" FLAT HEAD SCREW - 16 23
HIDDEN CAM - 10
5SMALL HIDDEN
CAM - 14
6
BLACK 1-3/8" HEX HEAD SCREW - 2
18
BLACK 1/2" HEX HEAD SCREW - 10
21
17 BLACK 1916" PAN HEAD SCREW  12
METAL BRACKET - 4
10
KNOB SET - 2
9
CAM SCREW - 24
7
RIGHT FILE GLIDE - 1
14
L-WRENCH - 1
13
4EXTENSION SLIDE - 2 3EXTENSION RAIL - 2
(EXTENSION SET SHOWN SEPARATED)
11 GROMMET - 2 12 GROMMET WITH
CAP - 2
8BUMPER CARD - 1
LEFT FILE GLIDE - 1
15
2RIGHT DRAWER SLIDE - 1 1LEFT DRAWER SLIDE - 1
Pae 4 www.sauder.com 423976
16 BLACK 2" PAN HEAD SCREW  18

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
å Push ten HIDDEN CAMS (5) into the BACKS (B and E),
UPRIGHT (F), and END (H).
Pae 5www.sauder.com423976
Arrow
5
(10 used)
Arrow
5
Arrow
The arrow in the HIDDEN
CAM must point toward the
hole in the ede of the board.
Hole
F
H
E
B

StepStep 2
Pae 6 www.sauder.com 423976
å Push fourteen SMALL HIDDEN CAMS (6) into the
DRAWER SIDES (T, V, X and Z) and SMALL BACK (CC).
Arrow
6
Arrow
6
(14 used)
Arrow
6
The arrow in the HIDDEN
CAM must point toward the
hole in the ede of the board.
Hole
Arrow
CC
T
V
X
Z

Step 3
F
H
DD
S
W
Pae 7www.sauder.com423976
7(24 used)
å Turn twenty-four CAM SCREWS (7) into the LEFT TOP (C),
RIGHT TOP (D), UPRIGHT (F), RIGHT END (H), SHELF (DD),
SMALL DRAWER FRONT (S) and LARGE DRAWER FRONT (W).
D
C

Pae 8 www.sauder.com 423976
å Fasten four METAL BRACKETS (10) to the RIGHT END (H)
and LEFT UPRIGHT (F). Use four BLACK 1/2" PAN HEAD
SCREWS (22).
å NOTE: Be sure the METAL BRACKETS are even with
edes of the END and UPRIGHT.
å NOTE: Be sure to position the BRACKETS exactly as shown.
Step 4
F
H
BLACK 1/2" PAN HEAD SCREW
(4 used in this step)
22
10
10

å Fasten the UPRIGHT LEG (G) to the UPRIGHT (F). Use
two BLACK 1/2" PAN HEAD SCREWS (22) throuh
the METAL BRACKETS on the UPRIGHT and into the
UPRIGHT LEG.
å Fasten the RIGHT END LEG (J) to the RIGHT END (H).
Use two BLACK 1/2" PAN HEAD SCREWS (22) throuh
the METAL BRACKETS on the RIGHT END and into the
RIGHT END LEG.
Step 5
F
H
G
J
Pae 9www.sauder.com423976
BLACK 1/2" PAN HEAD SCREW
(4 used for the METAL BRACKETS)
22
Surface with HIDDEN CAMS
Surface with HIDDEN CAMS

å Fasten the UPRIGHT LEG (G) to the UPRIGHT (F) as
shown in the left diaram. Use two BLACK 2" PAN HEAD
SCREWS (16).
å Fasten the RIGHT END LEG (J) to the RIGHT END (H )
as shown in the riht diaram. Use two BLACK 2" PAN
HEAD SCREWS (16).
Pae 10 www.sauder.com 423976
Step 6
J
G
H
F
BLACK 2" PAN HEAD SCREW
(4 used in this step)
16