Saxby Lighting Louvre Outdoor Wall Fitting User manual

INSTRUCTION MANUAL
Safety Warnings
BH17 7BY 91792 Louvre
Louvre Outdoor Wall Fitting (91792)
Assembly / User Instructions
Wall light with terminal connection block. Selection of cross and flat head screwdrivers.
Electric drill and assorted drill bits.
Wire strippers.
Electrical insulation tape.
Check the packaging and make sure that you have all the required parts.
Follow each assembly step in order to prevent incorrect assembly
Make sure all screws / nuts, including electrical connections etc are fully tightened before use.

Assembly / User Instructions Continued
BH17 7BY 91792 Louvre
V1 16/01/2020
1. Determine the position of your light fitting
taking into account the exit position of
the cable. Ensure that the mounting
surface is solid, preferably a brick or
block wall and ensure that there are no
other cables or pipes beneath the
surface.
2. .Separate the plastic back
plate from the fitting by removing the two
domed nuts / washers (1) on the front of
the fitting. Leave the threaded (2) bolts in
the back plate.
3. . The internal terminal block
(3) can be removed from its mounting
position inside the back plate to ease
fitment of the back plate. Use the back
plate as a template to mark the screw
holes. Make sure the back plate is
correctly aligned. Use a sharp object
such as a screwdriver to pierce the
rubber grommet in the back plate. Feed
the incoming cable (4) through the
rubber grommet and attach the back
plate to the wall. Use appropriate fixings.
Wall plugs and screws as supplied are
shown here. Do not over tighten as this
could damage the back plate.
4. . Connect the house wiring to
the internal terminal block (3).
Secure the
lantern to the wall bracket with the 2 x
domes nuts removed in 2 above.
5. Remove the lid (5) by removing the 2
screws (6). Retain for re-use
5. Fit the bulb – type given on product
label.
6. Re-fit the lid using the 2 x screws
removed in 5 above.
7.
Internal Cables
Incoming Cables
Earth (Green/yellow sleeved copper)
Brown
Blue
Switched Live-L
Neutral--N
Green/yellow (Earth) Cable
3
4
1
2
5
66
3
7