
INSTRUCTIONS FOR
MOBILE STAINLESS STEEL TOOL CABINET
10 DRAWER & CUPBOARD
MODEL NO: AP7210SS
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
product.
9Locate in a suitable work area.
8DO NOT let children near the cabinet.
8DO NOT open more than one drawer at a time.
9 Fillfromthebottomdrawerup.Ifthetoolcabinetislledfromthetopdrawerdown,itwillbetopheavyandmayfallover.
8DO NOTattempttoliftbythesidehandles,usechains,ropesorotherliftingdevices.
8DO NOT step or climb on the product or on the drawers.
8DO NOT alter the product in any way, e.g. do not weld on external lock bars or attach electrical equipment. This may cause damage to
the product or cause personal injury.
9 Keeponalevelsurface.
9 WhenmovingthecabinetDO NOTpullit.Pushthecabinettopreventinjury.
9 Closeandlockthedrawersbeforemovingthecabinet.Ifthedrawerscameopentheycouldmakethecabinetunstable.
9Apply the brakes when in desired position.
8DO NOTmountonatruckbedoranyothermovingobject.
8 Beawareofsharpedgesweargloves.
2. INTRODUCTION
Anti-ngerprintstainlesssteelconstructionwitha38mmthickwoodenworktop.45kgcapacitydrawerswithaluminiumpullhandlesandnon-slip
liners.Fourlargecastorwheels,twoxedandtwoswivel(whichincludebrakes).Comeswithheavy-dutysidehandleforcomfortandcontrol
whenmanoeuvring.Suppliedwithlocksandkeys.
3. SPECIFICATION
Model no: ............................................................ AP7210SS
Overallsize(WxDxH):.......................1990x490x955mm
Medium1/2drawer(x3): ...........................375x395x65mm
Large1/2drawer(x1):.............................375x395x140mm
X-large1/2drawer(x1): ..........................375x395x220mm
Mediumdrawer(x3): .................................855x395x65mm
Largedrawer(x1):...................................855x395x140mm
X-largedrawer(x1): ................................855x395x220mm
Cupboardsize(x1):.................................400x465x685mm
AP7210SS|Issue1-10/05/16
Original Language Version
© Jack Sealey Limited
Refer to
Instruction
Manual
Wear
Protective
gloves