Sealey Ap2513b.v4 User manual

13 DRAWER TOPCHEST & ROLLCAB

COMBINATION WITH BALL-BEARING SLIDES

MODEL NO: AP2513B.V4, AP22513BB.V3

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this Topchest

& Rollcab combination.

9Locate the Topchest & Rollcab combination in a suitable working area.

9Keep the work area clean, uncluttered and ensure there is adequate lighting.

9Keep the Nonstop & Rollcab combination clean and tidy in accordance with good workshop practice.

9Keep children and unauthorised persons away from the working area.

8DO NOT use the Topchest & Rollcab combination for any purpose other than that for which it is designed.

8DO NOT move the Topchest & Rollcab combination with drawers open.

8DO NOT open more than one drawer at the same time.

8DO NOT step on the drawers.

8DO NOT use in damp work areas.

WARNING! The warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and situations

that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied

by the operator.

2. INTRODUCTION

The economical way to buy American PRO® Ball-Bearing quality tool chests. Supplied packed one inside the other. This combo has smooth

25mm ball-bearing slides and all the features of the professional chests except that the swivel castors are Ø100mm. Features locks on both the

topchest and rollcab, with removable steel bar on the rollcab and integral bars on the topchest. Supplied with two keys for each lock.

3. SPECIFICATION

Model No:................................. AP2513B.V4/AP22513BB.V3

(W x D x H):

9 Drawer Topchest:

Overall size: ............................................600 x 260 x 380mm

Small 1/2 Drawer (x6):

Small Drawer (x2): ....................................510 x 220 x 35mm

Medium Drawer (x1):.................................510 x 220 x 80mm

4 Drawer Rollcab:

Overall Size:............................................680 x 330 x 935mm

Small Drawer (x2): ....................................515 x 305 x 45mm

Medium Drawer (x2):.................................515 x 305 x 80mm

Cupboard (x1): ........................................610 x 295 x 425mm

Refer to

instruction

manual

AP2513B.V4, AP22513BB.V3 Issue 1 11/03/22

4. ASSEMBLY

Original Language Version

BG150BS | Issue:2 H,F) 10/06/18

Remove the 4 screws on

the bottom of the topchest

assembly, then remove the

base from the bottom of the

topchest.

Reattach the base to the

bottom of the rollcab ensuring

it is the correct way up and

secure with the supplied

xings.

Lift the main rollcab body off

the base and topchest.

4 & 5.

In each corner of the base attach the

Castor and tighten the xings.

Attach the topchest side handles using the

2 x bolts. Insert the side handle into the

Rollcab and attach using 4 x bolts and

Washers.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids

according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior

notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our

technical team on technical@sealey.co.uk or 01284 757505.

Important: No Liability is accepted for incorrect use of this product.