Seaside Casual HIP CLUB CHAIR 407 User manual

Page 1
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | [e-mail]
1 PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware
Are included using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
CHAIR FRAME (407F)SEAT BACK ASSEMBLY
x 1
SEAT ASSEMBLY
x 1
HIP CLUB CHAIR
407
ASSEMBLY INSTRUCTIONS
#2 Phillips Head Screwdriver; 4mm Allen Key(included)Tools Required:
x 1
ARM SET
x 1
50mm Hex Lag
Part Code:316-1/4-10-50HL x 4
Part Code:4MMALLEN
4mm Allen Wrench
x 1
#14 x 3/4 Phillips Pan Head Screw
Part Code:316-14X3/4PPSMS x 14

On a clean at surface connect Seat Tray
Assembly using (6) 3/4” Phillips Pan Head
Screw (AS SHOWN). Do Not Over Tighten.
Attach Arms to Chair Frame with
(4) 3/4” Phillips Pan Head Screws Per Side
(AS SHOWN). Do Not Over Tighten.
ATTACH SEAT TRAY ASSEMBLY
Connect Seat Back Assembly to
Chair Frame on both sides with
(4)50mm Hex Lags (AS SHOWN).
Do Not Over Tighten.
ATTACH SEAT BACK ASSEMBLY
ATTACH ARMS TO FRAME
1
2
3