Seaside Casual MAD Chat Chair User manual

Page 1
289-REV A
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | sale[email protected]
1PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware
are included using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Back Assembly
x 1
Front Apron
Rear Apron
50mm Hex Lag
5/8 taps®
Left and Right Side Assemblies
x 1ea
Part Code: 4MMALLEN
Actual Size
4mm Allen Wrench
x 1
x 10
x 1
MAD Chat Chair
289
Part Code: 316-1/4-10-50HL
x 1
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver;
(Recommended: Rubber Mallet; Power Drill)
Tools Required:
Part Code: 316-8X1-3/4PFDS
Actual Size
1-3/4” Phillips Head Screw
Actual Size
1-1/4” Phillips Head Screw
x 7
Seat Assembly
x 1
x 10
x 2 Part Code: 316-8X1-1/4PFDS
Actual Size
Right Left
Actual Size
Part Code: TAP-5/8

Page 2
289-REV A
2ATTACH APRONS TO SIDE ASSEMBLIES
Align Front and Rear Aprons with
Front and Rear Legs. Secure with (6)
50mm Hex Lags through counter-
bored holes in Legs, and (2) 1-3/4”
Screws through pockets in Rear
Apron. Plug holes in Legs with 5/8”
taps®.
Drop Seat Assembly in between
Aprons. Secure with (7) 1-1/4”
Screws through counter-sunk holes
in bottom of Seat, starting with holes
in the front.
3ATTACH SEAT ASSEMBLY
Align pilot holes in rear stretchers of
Back Assembly with the counter-
bored holes in the Rear Legs. Secure
with (4) 50mm Hex lags. Plug holes
with 5/8” taps®.
4ATTACH BACK ASSEMBLY