Seaside Casual SYM Benches 215 User manual

Page 1
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | [e-mail]
1PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware
are included using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Seat Assemblies
216 x 2
Leg Assemblies
Center
(216 Only)
x 1 EA
Part Code: 4MMALLEN
4mm Allen Wrench
x 1
SYM Benches
(215) 28” Bench
(216) 72” Bench
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver;
Rubber Mallet
Tools Required:
Part Code: 316-8X1-1/4PFDS
1-1/4” Phillips Head Screw
216 x 20
Actual Size
Front Apron
216 x 2
216 x 2
Lower Rear Stretcher
Rear Apron
5/8” Bung
x 10
Actual Size
50mm Hex Lag
Part Code: 316-1/4-10-50HL
Actual Size
x 10
Left Right
215 x 1
215 x 1
215 x 1
216 x 1L & 1R
215 x 1
Hanger Bolts on 216 Only
Hanger Bolts on 216 Only
Hanger Bolts on 216 Only
Right
Left
215 x 12

Page 2
Align Left and Right Leg Assem-
blies with Aprons and Lower Rear
Stretcher. Secure using (10) 50mm
Hex Lags into pilot holes. Plug
Holes with 5/8” taps® using a Rub-
ber Mallet.
Align the angles on Left and Right
Rear Aprons, with the hanger bolts
towards center, to the Angle on rear
of Center Leg Assembly. Thread in
Aprons and Lower Rear Stretchers
until tight and aligned as shown.
2ATTACH APRONS & STRETCH-
ERS TO CENTER LEG (216 ONLY)
Hold Seat tight to Frame. For 216,
hold Seats so slats are tight together
in the center. Secure using (12) 1-
1/4” Phillips Head Screws for 215,
and (20) for 216.
3ATTACH OUTER LEGS
5SECURE SEAT ASSEMBLY
Rotate Front Apron slightly out-
ward. Insert Seat Assembly, starting
with the rear, and lightly tap until
Seat “pops” in.
4INSERT SEAT ASSEMBLY