Seaside Casual Greenwich 611 User manual

x 10
x 8
Page 1
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | [e-mail]
1 PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware are
Included using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
TOP ASSEMBLY
x 1
3/4” PAN HEAD SCREW
LEG
x 4
Actual Size
4mm ALLEN WRENCH
x 1
Greenwich 80” Bench
611
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver; Socket set
(Recommended: Rubber Mallet; Power Drill)
Tools Required:
1/4” X 80mm HEX HEAD LAG
x 1
FRAME ASSEMBLY

Page 2
On a clean at surface connect Legs to
Frame Assembly with (2) 1/4”x80mm
Lags (AS SHOWN). Do Not Over Tighten.
ATTACH LEGS
On a clean surface place frame and legs
on top of the top assembly and attach
with (10) 3/4” Pan Head screws
(AS SHOWN). Do Not Over Tighten.
ATTACH SEAT ASSEMBLY
1
2