10
What do I do if…
… no weight is displayed when a load is
placed on the scale?
• transport locking lever (see Fig. 6)
has not been released
• transport securing device, i.e. the
O-ring, has not been removed.
Servicing
Have the scale serviced and re-calibrated at
4-year intervals. Servicing and re-calibration
may be carried out solely by authorised
persons. Contact your Service Partner or
seca Customer Service.
Disposal
If the scale can no longer be used, the
responsible waste disposal association
will be glad to provide information about
the measures necessary to dispose of it
properly.
Warranty
A two-year warranty from date of delivery applies to
defects attributable to poor materials or workmanship.
All moveable parts – batteries, cables, mains units,
rechargeable batteries etc. – are excluded. Defects
which come under warranty will be made good for the
customer at no charge on production of the receipt. No
further claims can be entertained. The costs of transport
in both directions will be borne by the customer should
the equipment be located anywhere other than the
customer’s premises. In the event of transport damage,
claims under warranty can be honoured only if the
complete original packaging was used for any transport
and the scale secured and attached in that packaging just
as it was when originally packed. All the packaging should
therefore be retained.
A claim under warranty will not be honoured if the
equipment is opened by persons not expressly authorised
by seca to do so.
We would ask our customers abroad to contact their local
sales agent in the event of a warranty matter.
Technical data
Capacity: 16 kg
Graduations: 10 g
Dimensions
(WxHxD): 550 mm
190 mm
305 mm
Weight: approx. 6 kg
Temperature
range: +10 °C to +40 °C
Calibration as
per Directive
90/384/EEC: approved for medical
purposes, Class III
Medical product
as per Directive
93/42/EEC: Class I
Accuracy on first
calibration: up to 5 kg: +/- 5 g
over 5 kg: +/- 10 g
