Senco FINISHPRO 18 User manual

Fastening Solutions™
FinishPro® 18
ProSeries 18 Gauge Brad Nailer
5/83/41 11/411/2
15/8
13/4
2
AX
With its light weight, only 2.9 lbs, the powerful
FinishPro 18 is tough enough to do the job, but light
enough for all-day work. The FinishPro 18 brad nailer
drives nails up to 2" into hard wood applications.
Applications:
Cabinets, small trim, furniture repair, case backs,
baseboards, chair rails, picture frames, ornamentals
FinishPro®18 Features and Benefits:
• Extra power: drives fastener up to 2" in hard wood
applications
• Belt hook – for convenience
• Adjustable depth-of-drive
• Rear exhaust – keeps oil and dust away from the
work surface
• Easy-open latch – for quick loading
• Hardened steel driver – for extended life
• Full soft grip – for comfort and control
• Low load indicator – visible fastener indicator
• No-mar pad – to protect work materials
• One-year warranty
• Includes case, fitting, oil, hex wrench and fastener
rebate
www.senco.com ©2005 by Senco Products, Inc.
Fastener Specifications:
Gauge: 18
Fastener Range: 5/8" – 2"
Finish: Galvanized
Specifications:
Item #: 1U0001N
Tool Weight: 2.9 lbs (1.32 kg)
Height: 9.1" (231 mm)
Length: 10" (254 mm)
Nail Capacity: 110
Reg. Operating Pressure: 70-120 psig
Mode of Operation: Sequential Trigger
Lip Length: 3/4"

Side-Load Magazine
For convenience
Smooth metal cap
Comfort Grip
www.senco.com ©2005 by Senco Products, Inc.
Heavy-duty body.
No-Mar Pad
Protects woodwork
Rear Exhaust
Keeps oil and dust
away from work surface
Low Load Indicator
Easy to check fasteners
Easy-Open Latch
For more comfortable
loading
Rear Bumper
Protects work surface
Belt Hook
Lets the tool go
where you go
Adjustable Depth-of-Drive
Drives staples to a consistent
and controllable depth
Fastening Solutions™
FinishPro® 18
ProSeries 18 Gauge Brad Nailer
Always read the Operators Manual and Safety Instructions with all tools to ensure
proper use and safety precautions or contact SENCO for more information on our
trigger systems. Choose the right trigger system for your specific needs!
For additional information on how SENCO Fastening Solutions will save you time,
reduce costs, and increase quality, call our toll-free Action Line: 1-800-543-4596 to
find your nearest Authorized Senco Dealer or Distributor.
Visit our web site at: www.senco.com
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates
in the following a sequence - depress the safety element at the nose of tool against the
work surface then pull the trigger. After each fastener is driven, release the trigger and
lift the tool off the work surface before starting the sequence again. This trigger is
recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire)
operates in the following sequence- pull the trigger first and keep the trigger pulled
while moving the tool along the work surface with a bouncing motion, depressing the
safety element at the nose of the tool against the work surface where the fastener is to
be driven. This trigger is recommended for use by trained professionals only in high
production or volume applications.