Senco FinishPro 35 User manual

Fastening Solutions™
The only way to work.®
Safety First.
©2005 SENCO Products, Inc. www.senco.com
FinishPro® 35
15 Gauge Angled Finish Nailer
The FinishPro 35 angled finish nailer’s lightweight, well-balanced
construction enables the users to work all day by reducing fatigue and
increasing productivity. The FinishPro 35 drives 1-1/4" to 2-1/2" finish
nails for maximum versatility.
Applications:
Cabinets, interior trim, bookshelves, door casements, crown molding,
chair rails, exterior trim
.
Features and Benefits:
• Adjustable depth-of-drive
• Adjustable exhaust
• Easy-clear latch to clear jams fast
• Full soft grip – for comfort and control
• No-mar pad – to protect work materials
• Available in dual action or restrictive fire
• One-year warranty
• Includes case, fitting, oil, and fastener rebate
Tool Specifications:
Tool Weight: 4.7 lbs (2.1 kg)
Height: 11.9" (302 mm)
Length: 13.4" (340 mm)
Nail Capacity: 110
Reg. Operating Pressure: 70-120 psig
Mode of Operation: Available with either Dual Action or
Restrictive Trigger activating mechanisms
Fastener Specifications:
Gauge: 15
Fastener Range: 1-1/4" – 2-1/2"
Finish: Bright Basic/Galvanized

The only way to work.®
Safety First.
©2005 SENCO Products, Inc. www.senco.com
Fastening Solutions™
FinishPro® 35
15 Gauge Angled Finish Nailer
Adjustable
Depth-of-Drive
Drives nails to a
consistent and
controllable depth
No-Mar Pad
Protects woodwork
Angled Magazine
For tight spaces
Easy-Clear Guide Body
To clear jams fast
Soft Grip
Reduces fatigue,
increases productivity
Adjustable Exhaust
Quiet design No-Mar Bumper
Protects work surface
Always read the Operators Manual and Safety Instructions with all tools to ensure
proper use and safety precautions or contact SENCO for more information on our
trigger systems. Choose the right trigger system for your specific needs!
For additional information on how SENCO Fastening Solutions will save you time,
reduce costs, and increase quality, call our toll-free Action Line: 1-800-543-4596 to
find your nearest Authorized Senco Dealer or Distributor.
Visit our web site at: www.senco.com
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates
in the following a sequence - depress the safety element at the nose of tool against the
work surface then pull the trigger. After each fastener is driven, release the trigger and
lift the tool off the work surface before starting the sequence again. This trigger is
recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire)
operates in the following sequence- pull the trigger first and keep the trigger pulled
while moving the tool along the work surface with a bouncing motion, depressing the
safety element at the nose of the tool against the work surface where the fastener is to
be driven. This trigger is recommended for use by trained professionals only in high
production or volume applications.