Senco FinishPro 32 User manual

Fastening Solutions™
FinishPro® 32
ProSeries 16 Gauge Finish Nailer
11 /413/411 /22 21 /2
Driving 16ga Fasteners from 1 1/4" to 2 1/2" the FinishPro32 provides all
the versitility a professioanl contractor will ever need, combined with
features such as a thumbwheel adjustable depth of drive and a reversed
safety foot, the FinishPro32 will be the only 16ga nailer needed
Applications:
Baseboards, cabinets, case goods, chair rail, crown molding, decorative
trim, door & window casing-sash & millwork, bookshelves, exterior
triminterior trim,
FinishPro®32 Features and Benefits:
• Thumb wheel adjustable depth-of-drive
• 360º adjustable exhaust – keeps oil and dust away from the work surface
• Belt hook – for convenience
• Stretch comfort grip – for comfort and control
• EZ-Clear® removes jams fast and easy
• No-mar pad – to protect work materials
• Rear bumper – to protect the work surface
• Available in dual action or restrictive fire
• One-year warranty
• Includes case, fitting, oil, wrench and manual
www.senco.com ©2006 by Senco Products, Inc.
Fastener Specifications:
Gauge: 16
Fastener Range: 1-1/4” – 2-1/2”
Finish: Galvanized
Specifications:
Item#: 1X0201N Sequential Actuation w/case
Tool Weight: 4.3 lbs (1.8 kg)
Height: 113/8” (349 mm)
Length: 12” (304 mm)
Nail Capacity: 110
Reg. Operating Pressure: 70-120 psig
Mode of Operation: Tool is available with either contact actuation or
sequential trigger mechanism.

Fastening Solutions™
360º Adjustable Exhaust
Quiet design
Stretch Comfort Grip
www.senco.com ©2006 by Senco Products, Inc.
No-Mar Pad
Protects woodwork
Easy-Open Latch
For more comfortable
loading
Rear Bumper
Protects work surface
Belt Hook
Lets the tool go
where you go
Thumb Wheel Adjustable
Depth-of-Drive
Drives staples to a consistent
and controllable depth
Easy-Clear Guide Body
To clear jams fast
FinishPro® 32
ProSeries 16 Gauge Finish Nailer
Always read the Operators Manual and Safety Instructions with all tools to ensure
proper use and safety precautions or contact SENCO for more information on our
trigger systems. Choose the right trigger system for your specific needs!
For additional information on how SENCO Fastening Solutions will save you time,
reduce costs, and increase quality, call our toll-free Action Line: 1-800-543-4596 to
find your nearest Authorized Senco Dealer or Distributor.
Visit our web site at: www.senco.com
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates
in the following a sequence - depress the safety element at the nose of tool against the
work surface then pull the trigger. After each fastener is driven, release the trigger and
lift the tool off the work surface before starting the sequence again. This trigger is
recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire)
operates in the following sequence- pull the trigger first and keep the trigger pulled
while moving the tool along the work surface with a bouncing motion, depressing the
safety element at the nose of the tool against the work surface where the fastener is to
be driven. This trigger is recommended for use by trained professionals only in high
production or volume applications.