Sharp MX-2300 G User manual

SERVICE MANUAL
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
SHARP CORPORATION
MX-2300/2700 G
MX-2300/2700 N
NOTE FOR SERVICING . . . . . . . . . . . . . . . i
[1] PRODUCT OUTLINE . . . . . . . . . . . . 1-1
[2] SPECIFICATIONS . . . . . . . . . . . . . . 2-1
[3] CONSUMABLE PARTS . . . . . . . . . . 3-1
[4] UNPACKING AND INSTALLATION
* For how to unpacking and installation,
refer to the installation manual
(00ZMX2700/I1E).
[5] EXTERNAL VIEW AND INTERNAL
STRUCTURE . . . . . . . . . . . . . . . . . . 5-1
[6] ADJUSTMENTS . . . . . . . . . . . . . . . . 6-1
[7] SIMULATION . . . . . . . . . . . . . . . . . . 7-1
[8] SELF DIAG AND TROUBLE
CODE . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9] MAINTENANCE . . . . . . . . . . . . . . . . 9-1
[10] ROM VERSION-UP . . . . . . . . . . . . 10-1
[11] ELECTRICAL SECTION. . . . . . . . . 11-1
[12] OTHERS. . . . . . . . . . . . . . . . . . . . . 12-1
●DETAILS OF EACH SECTION
[A] EXTERNAL OUTFIT. . . . . . . . . . . . .A-1
[B] OPERATION PANEL . . . . . . . . . . . .B-1
[C] SCANNER SECTION . . . . . . . . . . . C-1
[D] MANUAL PAPER FEED
SECTION . . . . . . . . . . . . . . . . . . . . D-1
[E] TRAY PAPER FEED SECTION . . . .E-1
[F] PAPER TRANSPORT SECTION . . .F-1
[G] DUPLEX SECTION . . . . . . . . . . . . G-1
[H] LSU SECTION . . . . . . . . . . . . . . . . H-1
[i] PHOTOCONDUCTOR SECTION. . . i-1
[J] TONER SUPPLY SECTION . . . . . . . J-1
[K] DEVELOPING SECTION . . . . . . . . .K-1
[L] TRANSFER SECTION . . . . . . . . . . . L-1
[M] PROCESS CONTROL SENSOR,
REGISTRATION SENSOR
SECTION . . . . . . . . . . . . . . . . . . . . M-1
[N] FUSING SECTION . . . . . . . . . . . . . N-1
[O] PAPER EXIT SECTION . . . . . . . . . O-1
[P] DRIVE SECTION . . . . . . . . . . . . . . .P-1
[Q] PWB SECTION. . . . . . . . . . . . . . . . Q-1
[R] FAN AND FILTER SECTION . . . . . R-1
[S] SENSOR, SWITCH SECTION . . . . .S-1
CONTENTS
CODE: 00ZMX2700/S1E
DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM
MODEL

CONTENTS
NOTE FOR SERVICING
1. Precautions for servicing. . . . . . . . . . . . . . . . . . . . . . . . . i
2. Warning for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . i
3. Note for installing site . . . . . . . . . . . . . . . . . . . . . . . . . . . i
[1] PRODUCT OUTLINE
1. Product features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
2. Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
[2] SPECIFICATIONS
1. Basic specifications. . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
2. Functional specifications. . . . . . . . . . . . . . . . . . . . . . .2-5
3. Ambient conditions . . . . . . . . . . . . . . . . . . . . . . . . . .2-16
[3] CONSUMABLE PARTS
1. Supply system table . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
2. Maintenance parts list . . . . . . . . . . . . . . . . . . . . . . . . .3-3
3. Production number identification. . . . . . . . . . . . . . . . .3-4
[4] UNPACKING AND INSTALLATION
* For how to unpacking and installation,
refer to the installation manual (00ZMX2700/I1E).
[5] EXTERNAL VIEW AND INTERNAL STRUCTURE
1. Identification of each section and functions . . . . . . . .5-1
[6] ADJUSTMENTS
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1
2. Adjustment item list . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1
3. Details of adjustment. . . . . . . . . . . . . . . . . . . . . . . . . .6-2
[7] SIMULATION
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1
2. List of simulation codes. . . . . . . . . . . . . . . . . . . . . . . .7-3
3. Details of simulation . . . . . . . . . . . . . . . . . . . . . . . . . .7-9
[8] SELF DIAG AND TROUBLE CODE
1. Self diag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1
2. Trouble code list . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-4
3. Details of trouble code . . . . . . . . . . . . . . . . . . . . . . . .8-8
[9] MAINTENANCE
1. Maintenance system table . . . . . . . . . . . . . . . . . . . . .9-1
2. Details of maintenance . . . . . . . . . . . . . . . . . . . . . . . .9-3
3. Other related items . . . . . . . . . . . . . . . . . . . . . . . . . .9-14
[10] ROM VERSION-UP
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-1
2. Version-up procedure . . . . . . . . . . . . . . . . . . . . . . . .10-1
[11] ELECTRICAL SECTION
1. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
2. Actual wiring chart. . . . . . . . . . . . . . . . . . . . . . . . . . . 11-9
3. Signal list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-30
[12] OTHERS
1. System settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-1
2. Paper JAM code . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-6
●DETAILS OF EACH SECTION
[A] EXTERNAL OUTFIT
1. Disassembly and assembly . . . . . . . . . . . . . . . . . . . A-1
[B] OPERATION PANEL
1. Electrical and mechanism relation diagram . . . . . . . B-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . B-2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . B-2
[C] SCANNER SECTION
1. Electrical and mechanism relation diagram . . . . . . . C-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . C-2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . C-3
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-7
[D] MANUAL PAPER FEED SECTION
1. Electrical and mechanism relation diagram . . . . . . . D-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . D-2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . D-2
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-7
[E] TRAY PAPER FEED SECTION
1. Electrical and mechanism relation diagram . . . . . . . . E-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . E-3
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . E-4
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-8
[F] PAPER TRANSPORT SECTION
1. Electrical and mechanism relation diagram . . . . . . . . F-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . F-2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . F-2
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-4
[G] DUPLEX SECTION
1. Electrical and mechanism relation diagram . . . . . . . . G-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . G-2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . G-2
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6
[H] LSU SECTION
1. Electrical and mechanism relation diagram . . . . . . . . H-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . H-2
[i] PHOTOCONDUCTOR SECTION
1. Electrical and mechanism relation diagram . . . . . . . . . i-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . . i-2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . . i-3
[J] TONER SUPPLY SECTION
1. Electrical and mechanism relation diagram . . . . . . . . J-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . J-2
3. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J-3
[K] DEVELOPING SECTION
1. Electrical and mechanism relation diagram . . . . . . . . K-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . K-2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . K-2
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-5
[L] TRANSFER SECTION
1. Electrical and mechanism relation diagram . . . . . . . . L-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . L-2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . L-3
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-9
[M] PROCESS CONTROL SENSOR, REGISTRATION
SENSOR SECTION
1. Electrical and mechanism relation diagram . . . . . . . . M-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . M-1
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . M-2
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-3
[N] FUSING SECTION
1. Electrical and mechanism relation diagram . . . . . . . . N-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . N-2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . N-3
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N-7
[O] PAPER EXIT SECTION
1. Electrical and mechanism relation diagram . . . . . . . . O-1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . . . . O-2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . O-2
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-5
[P] DRIVE SECTION
1. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . P-1
2. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6
[Q] PWB SECTION
1. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . Q-1
[R] FAN AND FILTER SECTION
1. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . R-1
2. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-3
[S] SENSOR, SWITCH SECTION
1. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . S-1

MX-2300/2700 N/G NOTE FOR SERVICING - i
MX2700N Service Manual
NOTE FOR SERVICING
This Service Manual uses some symbols to assure safe operation.
This Service Manual uses some symbols to assure safe operation.
Please understand the meanings of photographs before servicing.
1. Precautions for servicing
1) When servicing, disconnect the power plug, the printer cable,
the network cable, and the telephone line from the machine,
except when performing the communication test, etc.
It may cause an injury or an electric shock.
2) There is a high temperature area inside the machine. Use an
extreme care when servicing.
It may cause a burn.
3) There is a high voltage section inside the machine which may
cause an electric shock. Be careful when servicing.
4) Do not disassemble the laser unit. Do not insert a reflective
material such as a screwdriver in the laser beam path.
It may damage eyes by reflection of laser beams.
5) When servicing with the machine operating, be careful not to
squeeze you hands by the chain, the belt, the gear, and other
driving sections.
6) Do not leave the machine with the cabinet disassembled.
Do not allow any person other than a serviceman to touch
inside the machine. It may cause an electric shock, a burn, or
an injury.
7) When servicing, do not breathe toner, developer, and ink
excessively. Do not get them in the eyes.
If toner, developer, or ink enters you eyes, wash it away with
water immediately, and consult a doctor if necessary.
8) The machine has got sharp edges inside. Be careful not to
damage fingers when servicing.
9) Do not throw toner or a toner cartridge in a fire. Otherwise,
toner may pop and burn you.
10) When replacing the lithium battery of the PWB, use a specified
one only.
If a battery of different specification is used, it may be broken,
causing breakdown or malfunction of the machine.
11) When carrying a unit with PWB or electronic parts installed to
it, be sure to put it in an anti-static-electricity bag.
It may cause a breakdown or malfunctions.
2. Warning for servicing
1) Be sure to connect the power cord only to a power outlet that
meets the specified voltage and current requirements.
Avoid complex wiring, which may lead to a fire or an electric
shock.
It may cause a fire or an electric shock.
2) If there is any abnormality such as a smoke or an abnormal
smell, interrupt the job and disconnect the power plug.
It may cause a fire or an electric shock.
3) Be sure to connect the grounding wire. If an electric leakage
occurs without grounding, a fire or an electric shock may
result.
To protect the machine and the power unit from lightening,
grounding must be made.
4) When connecting the grounding wire, never connect it to the
following points.
It may cause an explosion, a fire or an electric shock.
• Gas tube
• Lightning conductor
• A water pipe or a water faucet, which is not recognized as a
grounding object by the authorities.
• Grounding wire for telephone line
5) Do not damage, break, or work the power cord.
Do not put heavy objects on the power cable. Do not bend it
forcibly or do not pull it extremely.
It may cause a fire or an electric shock.
6) Keep the power cable away from a heat source.
Do not insert the power plug with dust on it into a power outlet.
It may cause a fire or an electric shock.
7) Do not put a receptacle with water in it or a metal piece which
may drop inside the machine.
It may cause a fire or an electric shock.
8) With wet or oily hands, do not touch the power plug, do not
insert the telephone line jack, do not operate the machine, or
do not perform servicing.
It may cause an electric shock.
3. Note for installing site
Do not install the machine at the following sites.
1) Place of high temperature, high humidity, low tempera-
ture, low humidity, place under an extreme change in tem-
perature and humidity.
Paper may get damp and form dews inside the machine, caus-
ing paper jam or copy dirt.
For operating and storing conditions, refer to the specifications
described later.
2) Place of much vibrations
It may cause a breakdown.
3) Poorly ventilated place
An electro-static type copier will produce ozone inside it.
The quantity of ozone produced is designed to a low level so
as not to affect human bodies. However, continuous use of
such a machine may produce a smell of ozone. Install the
machine in a well ventilated place, and ventilate occasionally.
WARNING: If this WARNING should be ignored, a serious
danger to life or a serious injury could result.
CAUTION: If this CAUTION should be ignored, an injury or
a damage to properties could result.

MX-2300/2700 N/G NOTE FOR SERVICING - ii
4) Place of direct sunlight.
Plastic parts and ink may be deformed, discolored, or may
undergo qualitative change.
It may cause a breakdown or copy dirt.
5) Place which is full of organic gases such as ammonium
The organic photoconductor (OPC) drum used in the machine
may undergo qualitative change due to organic gases such as
ammonium.
Installation of this machine near a diazo-type copier may result
in dirt copy.
6) Place of much dust
When dusts enter the machine, it may cause a breakdown or
copy dirt.
7) Place near a wall
Some machine require intake and exhaust of air.
If intake and exhaust of air are not properly performed, copy
dirt or a breakdown may be resulted.
8) Unstable or slant surface
If the machine drops or fall down, it may cause an injury or a
breakdown.
If there are optional paper desk and the copier desk specified,
it is recommendable to use them.
When using the optional desk, be sure to fix the adjuster and
lock the casters.
30 cm
30 cm 45 cm

MX-2300/2700 N/G PRODUCT OUTLINE 1 – 1
MX2700N Service Manual
[1] PRODUCT OUTLINE
1. Product features
A. Features
(1) Features
1) The employment of newly developed toner reduces the toner
consumption remarkably, realizing high fidelity pictures of
human skin, half tone, and hair. In addition, the employment of
"Auto Color" function, Sharp's unique auto recognition func-
tion, reproduces documents of difficult reproduction.
2) The power consumption for FAX standby with the power OFF
is 1W or less, reducing energy expenses of nighttime and load
to the environment.
3) Extension of the lifetime of the OPC drums together with the
frequency of maintenance realizes resource saving.
4) The unique security system inhibits unauthorized use of the
machine, preventing against leak of information.
• The electronic data are encrypted and saved in the hard
disk. When copying or printing or when sending FAX or
scanning, data are automatically erased to protect against
leak of important information.
• The user authentication system by a login name, a pass-
word, and an e-mail address is employed to prevent against
unauthorized use of a third party and to limit the use quantity
and usable functions for each user group. In addition, the
user authentication by the optional IC card read/writer may
be used.
5) The open systems architecture (Sharp OSA) is supported
which provides application development environment accord-
ing to user's needs.
6) Compact area for installation even to a space for a mono-
chrome machine
The machine can be installed to a space for a monochrome
machine, the smallest space in the class of 620mm (W) x
670mm (D), helping backup of color documentations in an
office. The installation of the optional finisher (MX-FNX1)
which is stored in the center paper exit section of the machine
allows stapling and finishing such as punch holes automati-
cally, improving the work efficiency.
(2) Environmental features
• Energy saving design by pre-heat mode/auto power shut-off
mode.
• Conforms to the International EnergyStar program.
• Conforms to the standards of Law on Promoting Green Purchas-
ing.
• Conforms to the Europe RoHS regulations.
(The contents of lead, mercury, hexavalent chromium, cadmium,
PBB [polybrominated biphenyl], PBDE [polybrominated diphenyl
ether] are limited to the regulated level or less.)

MX-2300/2700 N/G PRODUCT OUTLINE 1 – 2
2. Configuration
A. Lineup (Main unit and option)
1. Reversing single pass feeder
(MX-RPX1)
RSPF
PCL5c/PCL6
driver
Network
scanner
(Sharpdesk 1 license)
SPLC-c
driver
(MX-2300N)
(MX-2700N)
(MX-2300G)
(MX-2700G)
(MX-PBX1)
(MX-FWX1)
(MX-AMX1)
(MX-NSX1)
(For MX-2300G/2700G)
Data security kit
17. Printer
expansion kit
(PCL)
26. Application
integration
module
20. Internet Fax
expansion kit
21. Sharpdesk
1 license kit
22. Sharpdesk
5 license kit
30. Device Tray with
USB Hub (MX-RKX1)
18. Network
scanner
expansion kit
(Including document control)
16. CC authentication
version
(MX-FRX1)
(AR-PF1)
31. 256MB expansion memory board
(MX-SMX1)
14. Barcode font kit
(MX-FRX1U)
Security
ROM
For document
control PWB
For document
control PWB
Security
ROM
FAX memory (8MB)
(packed together)
CD
CD
(MX-AMX2)
27. Application
communication
module
CD
(MX-AMX3)
28. External
account module
CD
CD
CD CD
CD
CD
CD
(MX-USX1/
USX5)
23. Sharpdesk
10 license kit
24. Sharpdesk
50 license kit
(MX-US10/
US50)
25. Sharpdesk
100 license kit
(MX-USA0)
29. Facsimile expansion kit
(MX-FXX1)
ROM
15. Commercial
version
3. Stand/1x500 sheet
paper drawer
(MX-DEX1)
4. Stand/2x500 sheet
paper drawer
(MX-DEX2)
5. Large capacity tray
(MX-LCX1)
9. Finisher
(MX-FNX1)
7. Paper pass unit
(MX-RBX1)
13. Staple cartridge
(Approx. 5000 x 3)
(AR-SC2)
12. Staple cartridge
(Approx. 5000 x 3)
(MX-SCX1)
8. Saddle stitch finisher
(MX-FNX2)
10. Punch module
●2-hole (MX-PNX1A)
●3-hole (MX-PNX1B)
●4-hole (MX-PNX1C)
●4-hole (broad space)
(MX-PNX1D)
11. Punch module
●2-hole (AR-PN1A)
●3-hole (AR-PN1B)
●4-hole (AR-PN1C)
●4-hole (broad space)
(AR-PN1D)
6. Exit tray unit
(MX-TRX1)
2. Document cover
(MX-VRX1)
(For MX-2300G/2700G)
Copier/Printer (PCL)
/Scanner model
Copier/Printer (SPLC-c)
model
HDD
HDD
(MX-PKX1)
19. PS3
expansion
kit
CD
1
: Dec. 15 2005
1

MX-2300/2700 N/G PRODUCT OUTLINE 1 – 3
B. Machine configuration
STD: Standard provision, OP: Option
OP*1: Product key target. When PS is used, PCL function must be available. OP*2: Product key target.
OP*3: Product key target. To use this function, the printer memory (system memory) must be expanded to 640MB.
STD*4: No support for some areas.
C. Combination of options list
STD: Standard provision. OPT: Installable option. Commercially available parts: Use the specified parts, recommended parts, or parts the oper-
ations of which have been confirmed. –: Cannot be connected.
*1: Memory expansion is required. (256MB). *2: Printer expansion (PCL) and memory expansion are required.
*3:Installation of the MX-NSX1 or the MX-AMX1 is required. *4: Installation of the MX-NSX1 and expansion of memory (256MB) are required.
*5: No support for some areas.
MX-2300G MX-2300N MX-2700G MX-2700N
Copier memory (Local memory) (MB) 768
Printer memory (System memory) (MB) 384 640 384 640
Copier STD STD
GDI printer STD – STD –
PCL printer OP*3 STD OP*3 STD
PS printer OP*1
EFI printer –
Main body LCD MONOCHROME HVGA 8.1"
FAX OP*4
Scanner OP *3 – OP *3 STD
Filing STD
HDD STD
RSPF OP STD OP STD
OC OP – OP –
Automatic duplex STD
Security OP*2
Internet Fax OP*3
Section Name Model name MX-2300G
MX-2700G
MX-2300N
MX-2700N Remarks
Automatic document feeder 1. Reversing single pass feeder MX-RPX1 OPT STD
OC 2. Document cover MX-VRX1 OPT N/A
Paper feed system 3. Stand/1x500 sheet paper drawer MX-DEX1 OPT OPT
4. Stand/2x500 sheet paper drawer MX-DEX2 OPT OPT
5. Large capacity tray MX-LCX1 OPT OPT (A4)
Paper exit system 6. Exit tray unit MX-TRX1 OPT OPT
7. Paper pass unit MX-RBX1 OPT OPT
8. Saddle stitch finisher MX-FNX2 OPT OPT
9. Finisher MX-FNX1 OPT OPT (Inner finisher)
10. Punch module (For inner finisher) MX-PNX1 A/B/C/D OPT OPT
11. Punch module
(For saddle stitch finisher)
AR-PN1 A/B/C/D OPT OPT (Common in current models)
12. Staple cartridge (For inner finisher) MX-SCX1 OPT OPT (Approx. 5000 x 3)
13. Staple cartridge
(For saddle stitch finisher)
AR-SC2 OPT OPT (Approx. 5000 x 3)
Electrical system (ROM) 14. Barcode font kit AR-PF1 OPT OPT (Conventional model)
15. Data security kit MX-FRX1U OPT OPT (Commercial version)
16. Data security kit MX-FRX1 OPT OPT (Authentication version)
Electrical system (Software) 17. Printer expansion kit MX-PBX1 OPT*1 STD (PCL)
18. Network scanner expansion kit MX-NSX1 OPT*1 STD
19. PS3 expansion kit MX-PKX1 OPT*2 OPT
20. Internet Fax expansion kit MX-FWX1 OPT*1 OPT (Internet Fax)
21. Sharpdesk 1 license kit MX-USX1 OPT OPT
22. Sharpdesk 5 license kit MX-USX5 OPT*3 OPT*3
23. Sharpdesk 10 license kit MX-US10 OPT OPT
24. Sharpdesk 50 license kit MX-US50 OPT OPT
25. Sharpdesk 100 license kit MX-USA0 OPT OPT
26. Application integration module MX-AMX1 OPT*4 OPT*4
27. Application communication module MX-AMX2 OPT OPT
28. External account module MX-AMX3 OPT OPT
Electrical system (FAX) 29. Facsimile expansion kit MX-FXX1 OPT*5 OPT*5
Electrical system
(USB systems)
30. Device Tray with USB Hub MX-RKX1 OPT OPT
Electrical system and others 31. 256MB expansion memory board MX-SMX1 OPT N/A

MX-2300/2700 N/G SPECIFICATIONS 2 – 1
MX2700N Service Manual
[2] SPECIFICATIONS
1. Basic specifications
A. Base engine
(1) Type
(2) Engine speed
a. Tray1 – 4 (Main unit), LCC
b. Manual (Main unit)
*1: Switched by the service simulation setting
(3) Engine composition
(4) Shifter
(5) Engine resolution
(6) Warmup
(7) Jam recovery time
(8) Printable area
* The printable area for 12 x 18 must be as large as the A3/11 x 17
page dimension by PCL / PS driver.
(9) Void area
Type Desk-top
Color support Full color
Paper size MX-2700G/N MX-2300G/N
B/W Color B/W Color
A3, 11 x 17, 8K 14 14 12 12
B4, 8.5 x 14, 8.5 x 13 16 16 14 14
A4, B5, 8.5 x 11, 16K 27 27 23 23
A4R, B5R, A5R, 8.5 x 11R,
7.25 x 10.5R, 5.5 x 8.5R, 16KR
19 19 16 16
Extra 13 13 11 11
Paper size MX-2700G/N MX-2300G/N
B/W Color B/W Color
A3, 11 x 17, 8K 14 11 12 11
B4, 8.5 x 14, 8.5 x 13 16 12 14 12
A4, 8.5 x 11, 16K 23 21 23 21
B5 23 23 23 23
A4R, 16KR 19 14 16 14
8.5 x 11R 19 15 16 15
B5R, 7.25 x 10.5R 19 16 13 13
A5R, 5.5 x 8.5R 19 19 19 19
12 x 18 13 11 11 11
OHP(A4, 8.5 x 11) 11 10 11 10
OHP(A4R, 8.5 x 11R) 9 7 9 7
Extra 13111111
Envelope 13 13 11 11
Heavy paper (B5, A4, A5R, 8.5 x 11,
8.5 x 5.5R, 16K)
11 10 11 10
Heavy paper (Postcard HIGH)*1 11 10 11 10
Heavy paper (Postcard LOW)*1 7 7 7 7
Heavy paper (Other sizes) 7 5 7 5
Photoconductor kind OPC (Drum diameter: Black; φ30mm, Color;
φ30mm x 3)
Copying method Electronic photo (Laser)
Developing system Dry-type dual-component magnetic brush
development
Charging system Charged saw-tooth method
Transfer system Intermediate transfer belt
Cleaning system Counter blade
Fusing system Heat roller
Waste toner disposal No toner recycling system
Type Shifter
Paper weight 55 – 209g/m2(17 – 56 lbs)
Paper size Non offset
mode
(Normal
output)
A3, B4, A4R, B5, B5R, A5R, Postcard, 8K,
16K, 16KR,11 x 17, 8.5 x 14, 8.5 x 13,
8.5 x 11, 8.5 x 11R, 7.25 x 10.5R,
5.5 x 8.5R, Envelope, Extra
Offset
mode
A3, B4, A4R, B5, B5R, A5R, Postcard, 8K,
16K, 16KR, 11 x 17, 8.5 x 14, 8.5 x 13,
8.5 x 11, 8.5 x 11R, 7.25 x 10.5R, 5.5 x
8.5R (Not Envelope, Extra)
Productivity
(A4, 8.5x11)
Non-offset
(Normal
output)
MX-2300G/N B/W 23cpm
Color 23cpm
MX-2700G/N B/W 27cpm
Color 27cpm
Offset
mode
MX-2300G/N B/W 23cpm
Color 23cpm
MX-2700G/N B/W 27cpm
Color 27cpm
Offset range 30mm
Range of error
(In using the
recommended
paper, A4/8.5
x 11)
Horizontal
direction
Vertical
direction
Between
Jobs
Non-offset Not drop from
the tray.
--
Offset
mode
Within 50mm Within
±10mm
Min.10mm
Resolution Writing:
600 x 600dpi
1200 x 600dpi (Monochome printing only.)
* Rotation output not allowed at 1200dpi x 600dpi. PS
expansion kit needed.
Smoothing
function
None
Gradation Writing:
Monochrome: 2 levels (1bit) / Equivalent of 256 steps
Color: Each color 2 levels (1bit) / Each color 16 levels
(4bits) / Equivalent of 256 steps
Warmup time 80 sec or less
* The value may be increased if process-control
processing is being executed. Same as current model
Pre-heat Yes
With the door
open
Approx.
60 sec
Condition: After the door is kept open for 60
seconds, standard setting, the polygon
motor halt
A3 293 x 413mm 12 x 18 * 279 x 432mm
B4 253 x 357mm 11 x 17 275 x 425mm
A4 206 x 290mm 8.5 x 14 212 x 349mm
B5 178 x 250mm 8.5 x 13 212 x 323mm
A5 144 x 203mm 8.5 x 11 212 x 272mm
7.25 x 10.5 180 x 260mm 5.5 x 8.5 136 x 209mm
Postcard 96 x 141mm 8K 266 x 383mm
16K 191 x 263mm
Void area
Image loss
Top: 4 mm or less
Bottom: 3 mm or less
FR Total: 4 mm or less

MX-2300/2700 N/G SPECIFICATIONS 2 – 2
(10) Auto Color Selection
(11) Power source
(12) Power consumption
*1: Heater is OFF when power source ON.
(13) Noise
(14) Dimensions
(15) Weight
(16) Dimensions occupied by Machine (with Multi
Manual/Exit tray extended)
B. Paper feed unit/Transport/Paper exit secton
(1) Machine paper feed tray
(2) Paper feed tray 1/tray 2
(3) Manual feed tray (Bypass tray)
Copy Print Scan
Read The decision -color
or monochrome- is
decided when the
document is
scanned.
The scanning
speed for color is
always adopted.
N/A The decision -color
or monochrome- is
decided when the
document is
scanned.
The scanning
speed for color is
always adopted.
Output For the output of a black-white original,
the decision to switch from color mode
to black-white mode is made when the
drum running distance shortens.
First copy (print):
If a fixed number of black-white pages
are contained in a series, switch from
color mode to black-white mode, starting
with the first page of the batch. If the
original starts with a black-white page,
the output will start in the black-white
mode.
From the second copy (print) on:
The condition is completely understood.
If there are a fixed number of black-
white pages in a series, switch to the
black-white mode, starting with the first
page in the series.
N/A
Count Black-white count for the pages recognized as black-white.
Color count for the pages recognized as colored.
For N-UP, a page will be counted as a color page if there is at
least one colored page inserted upon N-UP.
100V type 200V type
Voltage / Current 100 – 127V 12A 220 – 240V 8A
Frequency 50/60Hz
Power source
code
Fixed type (direct) Inlet type
Power switch 2 switches (Primary switch: in the front cover;
Seconday switch: the operation panel)
100V type 200V type
Maximum rated power
consumption
1.44kW 1.84kW
In action B/W : 63dB or less
Color : 63dB or less
Standby B/W : 55dB or less
MX-2300G/MX-2700G MX-2300N/MX-2700N
Outer dimensions
(W x D x H)
(with Multi
Manual)
620 x 670 x 795mm
(24 13/32 x 26 3/8 x
31 inch)
620 x 670 x 950mm
(24 13/32 x 26 3/8 x
37 26/64 inch)
Footprint (W x D) 590 x 670mm
(23 15/64 x 26 3/8 inch)
590 x 670mm
(23 15/64 x 26 3/8 inch)
MX-2300G/MX-2700G MX-2300N/MX-2700N
Main unit Approx. 102kg (225lbs) Approx. 112kg (247lbs)
Main unit +
Developer +
Toner cartridge
Approx. 106kg (234lbs) Approx. 116kg (256lbs)
MX-2300G/MX-2700G MX-2300N/MX-2700N
W1050 x D670mm (W41-22/64 x D26-3/8 inch)
Form Standard: Double feeder tray + multi manual
Maximum: Fourfold feeder tray + multi manual +
large capacity feeder cassette
Feeding method Feeding from the upper section with front loading
Heater (Engine part) Service parts
Feeding method Feeding from the upper section with front loading
Heater (Engine part) Service parts
Paper size A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR
11 x 17, 8.5 x 14, 8.5 x 13, 8.5 x 11,
8.5 x 11R, 7.25 x 10.5R, 5.5 x 8.5R
Changing of paper
size
Guide adjustment by users and size setting
through key input
Paper type setting Yes
Default paper size
setting
(Tray 1)
Abroad-AB : A4
Abroad-inches : 8.5 x 11
(Tray 2)
Abroad-AB : A3
Abroad-inches : 11 x 17
Feedable paper
type/weight
Plain paper: 60-105g/m2(16-28 lbs)
Paper capacity Standard paper: 500 sheets (80g/m2, 21lbs)
Paper Type Plain paper, pre-printed paper (not including
backing paper), recycled paper, letter head, pre-
punched paper, colored paper
* Users can set up all of these paper types.
Paper size detection
(Size setting through
key input)
A3, B4, A4, A4R, B5, B5R, A5R, 8.5 x 13
11 x 17, 8.5 x 14, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5R,
7.25 x 10.5R, 8K, 16K, 16KR
Detection of
Remaining Paper
Level detection (4 levels: 100%, 67%, 33%, and
none)
Paper Size A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR
12 x 18, 11 x 17, 8.5 x 14, 8.5 x 13, 8.5 x 11, 8.5 x
11R, 7.25 x 10.5R, 5.5 x 8.5R
Envelope (Monarch / Com-10 / DL / C5 / Rectangle 3 /
Western 2 / Western 4)
Extra Size (Tab paper is limited to A4; tab width
12mm-20mm / 8.5 x 11; tab width 6.1-17mm)
Changing of
paper size
Guide adjustment by users
Paper type setting Yes
Feedable paper
type/weight
Thin paper: 55 – 59g/m2(15 – 16 lbs)
Plain paper: 60 – 105g/m2(16 – 28 lbs)
Heavy Paper: 106 – 209g/m2 (28+ – 56 lbs)
Envelope: 75 – 90g/m2(20 – 24 lbs)
OHP
Label paper
Tab paper
Gloss Paper
Paper capacity Standard paper: 100 sheets
Envelope: 20 sheets
OHP: 20 sheets
Heavy paper: 40 sheets
Tab paper: 20 sheets
Gloss paper: 20 sheets
Other special paper: 1 sheet
Paper Type Plain paper, pre-printed paper (Excluding back print
paper), recycled paper, letter head, pre-punched
paper, colored paper, heavy paper, thin paper, label
paper, OHP, tab paper, envelope.
* Users can set up all of these paper types.

MX-2300/2700 N/G SPECIFICATIONS 2 – 3
(4) Double-sided
(5) Paper exit tray (Center tray)
(6) Paper exit tray unit (Right tray)
* Option (MX-TRX1)
(7) Reversing single pass feeder (MX-2300N/2700N)
Paper size
detection
Auto Detect
Auto-AB
A3, B4, A4, A4R, B5, B5R, A5R, 8.5 x
13, Postcard, 8.5 x 11, 11 x 17
Auto Detect
Auto-Inch
12 x 18, 11 x 17, 8.5 x 14, 8.5 x 11,
8.5 x 11R, 5.5 x 8.5R, 7.25 x 10.5R,
A3, B4, A4, B5
For China A3, B4, A4, A4R, B5, B5R, A5R, 11 x
17, 8.5 x 14, 8.5 x 11, 8K, 16K
Detection of
remaining paper
yes or no only
Method Non-Stack
Paper size A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR,
11 x 17, 8.5 x 14, 8.5 x 13, 8.5 x 11, 8.5 x 11R,
8.5 x 5.5R
Paper type Plain paper, pre-printed paper (not including
backing paper), recycled paper, letter head, pre-
punched paper, colored paper
Paper weight
(for duplex operation)
Plain paper: 60-105g/m2(16-28 lbs)
Logo paper support For paper such as letterhead paper with front-
back attributes, the engine control must be cared
for printing side.
Exit location/
method
Face down in the main unit
Exit capacity 500 sheets (A4 or 8.5 x 11 (color recommended
paper))
Exit paper size/
type
All feedable paper except 12x18.
Exit paper
detection
No
Exit tray full
detection
Yes
Shifting function Yes
Rotation sort No
Form Exit tray unit
Transport standard Center standard
Ejecting location/
method
External ejection from the right face of the main unit
/ face-down ejection
Tray capacity 100 sheets (A4 or 8.5 x 11 (color recommended
paper))
Ejected paper size/
type
Any feedable paper except envelope and tab paper.
Full tray detection Yes
Shifter No
Dimensions W289 x D405 x H52mm
(W11-3/8 x D15-61/64 x H2-3/64 inch)
With tray extended: W419 x D405 x H52mm
(W16-1/2 x D15-61/64 x H2-3/64 inch)
Weight Approx. 0.93kg (2lbs)
Installation/
maintenance
Installation by service personnel.
Optional detection Setting by simulation (Sim. 26-1)
Packaged items Exit tray, full actuator, installation advisory (in 6
languages)
Form RSPF (Reversing single pass feeder)
Scan speed Monochrome
(A4/8.5 x 11)
Color
(A4/8.5 x 11)
Copy 1-sided: 27 sheets/minute
(600 x 300dpi, 1bit)
2-sided: 15 pages/minute
(600 x 300dpi, 1bit)
1-sided: 27 sheets/
minute (600 x
600dpi, 4bit)
2-sided: 12 pages/
minute (600 x
600dpi, 4bit)
Fax 1-sided: 48 sheets/minute
(200 x 200dpi, 1bit)
2-sided: 15 pages/minute
(200 x 200dpi, 1bit)
N/A
Scanner 1-sided: 48 sheets/minute
(200 x 200dpi, 1bit)
2-sided: 15 pages/minute
(200 x 200dpi, 1bit)
1-sided: 35 sheets/
minute (200 x
200dpi, 8bit) (when
in full color)
2-sided: 15 pages/
minute (200 x
200dpi, 8bit)
Internet
Fax
1-sided: 48 sheets/minute
(200 x 200 dpi, 1bit)
2-sided: 15 pages/minute
(200 x 200 dpi, 1bit)
N/A
Document setup
direction
Upward standard (1toN feeding standard)
Document standard
location
Center standard (Rear one-side standard for
random feeding)
Document transport
method
Sheet-through method
Document sizes Inch type-1 11 x 17, 8.5 x 14, 8.5 x 11,
8.5 x 11R, 8.5 x 5.5, A4, A3
Inch type-2 11 x 17, 8.5 x 13, 8.5 x 11,
8.5 x 11R, 8.5 x 5.5, A4, A3
AB type-1 A3, B4, A4, A4R, B5, B5R, A5,
8.5 x 11, 8.5 x 14, 11 x 17
AB type-2 A3, B4, A4, A4R, B5, B5R, A5,
8.5 x 11, 216 x 330, 11 x 17
AB type-3 A3, B4, A4, A4R, A5, 8K, 16K,
16KR, 8.5 x 11, 216 x 330, 11 x 17
Long paper 800mm (Monochrome 2 levels
only)
Mixed feeding (same type / same width) possible
Random feeding (feeding of different types /
different widths)
Only the following combinations of 2 size types
are allowed: A3 and B4; B4 and A4R; A4 and B5;
B5 and A5; and 11-inch and 8.5-inch.
2-sided scanning is disabled during random
feeding.
* When mix feeding, random feeding, or manual
set of document size, scan speed is 16 pages/
minute (A4, 8.5 x 11)
Document
weights
1-side Thin paper 35 – 49g/m2(9 – 13 lbs)
* Thin paper mode is (18 pages/
minute (A4, 8.5 x 11) set up for
the thin paper.
Plain paper 50 – 128g/m2(13 – 34 lbs)
2-side 50 – 105 g/m2(13 – 28 lbs)
Document carrying
capacity
Maximum: 100 sheets (80g/m2, 21lbs), or
Maximum: 13 mm, 1/2 inch or less
Types of document
that may not be
transported
The following documents are NOT allowed:
OHP, second original drawing, tracing paper,
carbon paper, thermal paper, wrinkled / broken /
torn document, document with cuts and pastes,
documents printed by an ink ribbon, and
perforated document except 2-punched / 3-
punched (Perforated document by punch unit is
allowed.)
Paper detection Yes

MX-2300/2700 N/G SPECIFICATIONS 2 – 4
C. Scanner section
(1) Resolution/Gradation (or Levels)
(2) Original cover
D. Fuser section
(1) Type
Paper detection size Auto detection (Switching one type of detection
unit through system setting)
Inch-1 11 x 17, 8.5 x 14, 8.5 x 11,
8.5 x 11R, 5.5 x 8.5, A4, A3
Inch-2 11 x 17, 8.5 x 13, 8.5 x 11,
8.5 x 11R, 5.5 x 8.5, A4, A3
AB-1 A3, B4, A4, A4R, B5, B5R, A5, 8.5
x 11, 8.5 x 14, 11 x 17
AB-2 A3, B4, A4, A4R, B5, B5R, A5, 8.5
x 11, 216 x 330,
11 x 17
AB-3 A3, B4, A4, A4R, A5, 8K, 16K,
16KR, 8.5 x 11,
216 x 330, 11 x 17
Paper feeding
direction
Right hand feeding
Document inversion Yes
Simultaneous double-
sided scanning
Not allowed
Maintenance parts Paper feed roller, pick-up roller, separation roller
Power source Provided from the main unit
Power consumption 35.8W
Dimensions W590 x D510 x H155 (mm)
W23-15/64 x D20-5/64 x H6-7/64 (inch)
Weight Approx. 10kg (22.0lbs)
Scan
resolution (dpi)
Copy mode
Monochrome Color
Original
Cover
600 x 600dpi
600 x 300dpi
(Default)
600 x 600dpi
(Default)
RSPF 600 x 600dpi
600 x 300dpi
(Default)
600 x 600dpi
(Default)
Transmission
resolution (dpi)
Image
process
(Scanner)
100 x 100dpi / 200 x 200dpi / 300 x 300dpi
/ 400 x 400dpi / 600 x 600dpi
(Internet Fax)
200 x 100dpi (Half tone not allowed) /
200 x 200dpi / 200 x 400dpi /
400 x 400dpi / 600 x 600dpi
(FAX)
Standard (203.2 x 97.8dpi) (Half tone not
allowed) / Fine (203.2 x 195.6 dpi) /
Super fine (203.2 x 391dpi) /
Ultra fine (406.4 x 391 dpi)
PC-FAX/
PC-Internet
Fax
200 x 100dpi / 200 x 200dpi / 200 x 400dpi
/ 400 x 400dpi
Network
TWAIN
75dpi / 100dpi / 150dpi / 200dpi / 300dpi /
400dpi / 600dpi or custom: 50-9600dpi
Exposure lamp Xenon
Scan Levels 10bits
Output levels FAX mode: 1bit
Internet Fax mode: 1bit
Scanner mode:
Black & White: 1bit
Gray Scale: 8bit
Full Color: Each color RGB 8bit
Scan Range 297 x 432mm
Original Cover
Standard
Location
Left back as standard
Detection Yes
Detection Size Auto Detect (One type of detection unit to be switched
for software destination)
Inch <INCH-1>
11 x 17, 8.5 x 14, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5
<INCH-2>
11 x 17, 8.5 x 13, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5
AB <AB-1>
A3, A4, A4R, A5, B4, B5, B5R
<AB-2>
A3, A4, A4R, A5, B5, B5R, 216 x 330
<AB-3>
8K, A4, A4R, A5, B4, 16K, 16KR
Heater
(Scanner part)
Service parts
System Heat roller attachment system

MX-2300/2700 N/G SPECIFICATIONS 2 – 5
2. Functional specifications
A. Specifications of copy functions
(1) Copy speed (Continuous copy speed)
a. Tray 1 – 4, LCC
b. Manual feed
*1: Switched by the service simulation setting
(2) First copy time
[Measuring Conditions]
* Polygon in rotation
* Feeding A4/8.5 x 11 (landscape) paper from the main unit tray 1
* No Auto Color Selection and No Auto Color for color
(3) Job speed
a. Document changing speed (in copy mode)
* The copy speed in combination of the main unit and the auto
document feed user is defined.
* S to S: A4/8.5 x 11 document, 11 pages and 1 copy (not including
the first copy)
Monochrome: 600 x 300dpi and color: 600 x 600dpi (default)
b. BLI standard
* S to S: 10 pages of A4/8.5 x 11 document and 5 copies
* S to D: 10 pages of A4/8.5 x 11 document and 5 copies
* D to D: 10 pages (20 sides) of A4/8.5 x 11 document and 5 cop-
ies
Model name MX-2700G/N MX-2300G/N
Color / B/W Color B/W Color B/W
Print / Copy Print Copy Print Copy Print Copy Print Copy
Paper size Magnification Normal Reduction (25%)
Normal (100%)
Enlargement (400%)
Normal Reduction (25%)
Normal (100%)
Enlargement (400%)
Normal Reduction (25%)
Normal (100%)
Enlargement (400%)
Normal Reduction (25%)
Normal (100%)
Enlargement (400%)
A3, 11 x 17, 8K 14 14 14 14 12 12 12 12
B4, 8.5 x 14, 8.5 x 13 16 16 16 16 14 14 14 14
A4,B5,8.5x11,16K 2727272723232323
A4R, B5R,A5R, 8.5 x 11R,
7.25 x 10.5R, 5.5 x 8.5R, 16KR
19 19 19 19 16 16 16 16
Extra 1313131311111111
Model name MX-2700G/N MX-2300G/N
Color / B/W Color B/W Color B/W
Print / Copy Print Copy Print Copy Print Copy Print Copy
Paper size Magnification Normal Reduction (25%)
Normal (100%)
Enlargement (400%)
Normal Reduction (25%)
Normal (100%)
Enlargement (400%)
Normal Reduction (25%)
Normal (100%)
Enlargement (400%)
Normal Reduction (25%)
Normal (100%)
Enlargement (400%)
A3, 11 x 17, 8K 11 11 14 14 11 11 12 12
B4, 8.5 x 14, 8.5 x 13 12 12 16 16 12 12 14 14
A4,8.5x11,16K 2121232321212323
B5 23 23 23 23 23 23 23 23
A4R, 16KR 14 14 19 19 14 14 16 16
8.5 x 11R 15 15 19 19 15 15 16 16
B5R,7.25x10.5R 1616191913131313
A5R, 5.5 x 8.5R 19 19 19 19 19 19 19 19
A3W, 12 x 18 11 11 13 13 11 11 11 11
OHP(A4,8.5x11) 1010111110101111
OHP(A4R,8.5x11R) 77997799
Extra 1111131311111111
Envelope 13 13 13 13 11 11 11 11
Heavy paper (B5, A4, A5R, 8.5 x
11, 8.5 x 5.5R, 16K)
10 10 11 11 10 10 11 11
Heavy paper (Postcard HIGH)
*1
10 10 11 11 10 10 11 11
Heavypaper(PostcardLOW)*177777777
Heavypaper(Othersizes)55775577
Platen/RSPF B/W Color
Platen 6.3 sec 8.9 sec
RSPF 11.6 sec 16.9 sec
MX-2700G/N MX-2300G/N
B/W Color B/W Color
S to S 27cpm
(100%)
27cpm
(100%)
23cpm
(100%)
23cpm
(100%)
Model name / Mode
MX-2700G/N MX-2300G/N
B/W
(1bit)
Color
(4bit)
B/W
(1bit)
Color
(4bit)
Copy
method
S to S 24cpm
(89%)
23cpm
(85%)
20cpm
(89%)
20cpm
(85%)
S to D 21cpm
(78%)
20cpm
(74%)
19cpm
(83%)
18cpm
(78%)
D to D 21cpm
(78%)
19cpm
(70%)
19cpm
(83%)
17cpm
(74%)

MX-2300/2700 N/G SPECIFICATIONS 2 – 6
c. Bertl standard
* S to S: 5 pages of A4/8.5 x 11 document and 5 copies
* S to D: 10 pages of A4/8.5 x 11 document and 1 copy
* D to D: 5 pages (10 sides) of A4/8.5 x 11 document and 5 copies
(4) Continuous copy
(5) Resolution
(6) Copy document
(7) Copy magnification ratio
(8) Density, copy image quality processing
(9) Color copy mode
(10) Color Adjustment
(11) Copy functions
Model name / Mode
MX-2700G/N MX-2300G/N
B/W
(1bit)
Color
(4bit)
B/W
(1bit)
Color
(4bit)
Copy
method
S to S 23cpm
(84%)
21cpm
(78%)
19cpm
(84%)
18cpm
(78%)
S to D 14cpm
(52%)
12cpm
(44%)
13cpm
(57%)
11cpm
(48%)
D to D 20cpm
(74%)
19cpm
(70%)
18cpm
(78%)
17cpm
(74%)
Multi max. number 999 sheets
Scan resolution 600 x 600dpi
Writing resolution 600 x 600dpi
Document Max. A3 (11 x 17)
Document type Sheet/Book original
Copy
magnification ratio
Normal: 1:1±0.8%
AB series: 25%, 50%, 70%, 81%, 86%, 100%,
115%, 122%, 141%, 200%, 400%
Inch series: 25%, 50%, 64%, 77%, 100%, 121%,
129% , 200%, 400%
Zoom 25 – 400% (25 – 200% for RSPF)
Preset
magnification ratio
4
XY zoom Yes
Exposure mode Automatic (Color: Auto Color, Black-white: Character
AE)
Text,Text/Printed Photo, Print photo, Text/Photo,
Photo, Map, Pale-color document.
Copy document
mode
Effective for Text, Text/Printed photo, Printed photo
mode.
Color emphasis Effective for Text, Text/Printed photo, Printed photo,
Text/Photo, Photo, Map mode.
Manual steps 9 steps
Toner save mode Monochrome: Yes
Color: Yes
Off on printed photo, photo or pale-color document
Auto Color
Selection copy
Copy mode automatically discerning color/
monochrome.
Full color mode Enforced full color mode
2-color mode Red-black mode (Change red point in document into
other color)
Mode to select black and another color from R/G/B/
C/M/Y
Single color mode Mode to select one color from R/G/B/C/M/Y
Monochrome copy
mode
Enforced monochrome copy mode
RGB adjustment Yes
Color balance Yes
Saturation
adjustment
Yes
Brightness
adjustment
Yes
Contrast
adjustment
No
Sharpness
adjustment
Yes
Background
removal
Yes
Auto color
calibration
Allowed by system setting
Registration
adjustment
Allowed by system setting (automatic-manual)
Function Automatic paper
selection
Yes (Mixed/random size feeding
supported)
Automatic
magnification selection
Yes
Paper type select Yes
Type setting allowed
Auto tray switching Yes
Rotated copy Yes
Large rotated copy exceeding A4
supported
Electronic sort Yes
Rotated sort No
Unavailable
Job reservation Yes
Program call/
registration.
Yes (The program name can be
registered.)
Preheat function Yes
Conditions set up by system setting
Auto power shutoff Yes
Conditions set up by system setting
User authentication 200
Process control Yes
Tandem copy Yes
Mixed document
feeder
Yes (Random + MIX)
Document paper size
input
Yes (Determinate/indeterminate
size)
Indeterminate paper
size input
Yes
2-sided copy direction
switch
Yes
Special
function
Margin shift Yes
Edge/center erase Yes
Dual page copy Yes
Cover/insertion Yes
Tab paper insertion Yes (Insertion only. Tab copy not
allowed. Staple/Punch not allowed.)
OHP insertion Yes
Tab copy Yes
Centering Yes
2in1/4in1 Yes
Pamphlet Yes
Card shot Yes
Book copy Yes
Large capacity
document mode
Yes
Black-white Inversion Yes (Only black-white copy allowed/
color copy not allowed upon setup
Not ready)
Multi-Page
Enlargement
Yes
Mirror image Yes
Photo repeat Yes

MX-2300/2700 N/G SPECIFICATIONS 2 – 7
B. Image send function
(1) Mode
(2) System environment
(3) Image send function (Push send from the main
unit)
a. Support system
b. Support image
c. Image processing
d. Specification of Addresses
Special
function
Date print Yes (Colored allowed: Bk, C, M, Y)
Character Yes (Colored allowed: Bk, C, M, Y)
Stamp Yes (Colored allowed: Bk, C, M, Y)
Page printing Yes (Colored allowed: Bk, C, M, Y)
Shading No
Proof copy Yes
Document Control Yes (with Data Security Kit
equipped)
Scanner Scan to e-mail
Scan to Desktop
Scan to FTP
Scan to Folder(SMB)
Scan to USB memory
Scan to e-mail with Meta
Scan to Desktop with Meta
Scan to FTP with Meta
Scan to SMB with Meta
Internet
Fax
Internet Fax to e-mail/FTP
Full mode supported (including Simple mode)
IP-FAX No
Copier memory
(Local memory)
Printer memory
(System Memory)
Data saving
destination
Scanner 768MB
(Standard)
640MB (Expansion
required for G model)
HDD (Standard)
Internet
Fax
768MB
(Standard)
640MB (Expansion
required for G model)
HDD (Standard)
Mode Scanner Internet Fax
Corresponding
server
/protocol
SMTP
FTP(TCP/IP)
SMB
POP server
SMTP server
ESMTP server
Mode Scanner Internet Fax
File format Monochrome: TIFF, PDF,
Encrypted PDF
Color: Gray scale, color
TIFF, JPEG, PDF,
Encrypted PDF
Monochrome TIFF-FX
(TIFF-F, TIFF-S)
Compression
method
[Monochrome]
• Non-compression
• G3 (1-dimensional)
= MH (Modified
Huffman)
•G4
= MMR (Modified MR)
[Color/Gray scale]
• JPEG (High, middle,
low)
MH, MMR
Specified pages per
size (number of
page(s)
specification
allowed)
Yes ---
Mode Scanner Internet Fax
Original scanning
color
Full color, grayscale, B/W B/W
Auto color selection [When Color start key
pressed.]
• Auto (When judged as
Color : Full color, When
judged as B/W : B/W (2
value)/Gray scale)
[When B/W start key]
• B/W (2 value)
• Gray scale
---
Halftone
reproduction
Equivalent of 256 steps
Density adjustment Auto + 5 steps
(The image quaity of
"Auto" is the same as that
of "Manual = 3" when
selecting full color/
grayscale.)
Auto + 5 steps
Black-white enabled
•Auto
• Manual
Color button enabled
When selecting "Auto":
• Text/printed photo
• Text/photo
•Text
When selecting "Manual":
• Text/printed photo
• Text/Photo
•Text
•Photo
• Printed photo
•Map
---
Selection of image
quality
--- Half tone (Black-white
only) ON/OFF
Resolution
(depends on file
format/transmission
method)
100 x 100 dpi 200 x 100dpi
(Half tone not allowed)
200 x 200 dpi 200 x 200dpi
300 x 300 dpi 200 x 400dpi
400 x 400 dpi 400 x 400dpi
600 x 600 dpi 600 x 600dpi
Moire reduction
mode
Yes (Color/grayscale) ---
Notes' security
feature
Yes (color only) ---
Mode Scanner Internet Fax
Address
specification
Specification by one-touch/group/direct address
entry.
Entry from soft keyboard. (Scanner/Internet Fax)
Entry from 10-key. (Fax)
Selection from LDAP server
Setting of default
address *1
Yes ---
Number of One-
touch address key
registration
Total (number of key): Maximum 999
Number of Group (1
key) address
registtation
Number of Group (1 key) address registration :
maximum 500
Number of Group key registration : 5000 (Total
address number included in /999 key)
Program 48
Direct entry of
addresses
Soft keyboard
Chain dial ---
Resend Call up nearest 8 addresses. *4

MX-2300/2700 N/G SPECIFICATIONS 2 – 8
*1: The scanner mode allows setting the default address. To
transmit data, users only have to set the original and press the
start key.
*2: Function to set up a text message that will be added
automatically to the message body upon mail transmission.
Editing upon transmission is not allowed.
*3: When disabled, the address registration is not allowed either.
*4: Except for FTP, Desktop, SMB, USB memory, Broadcast.
e. Specification of Multiple Addresses
* Broadcast transmission by scanner, Internet Fax and Fax is
allowed. (Monochrome only)
f. Transmission function
g. Reception function
*1: The auto wake up print for Internet Fax is a pseudo night-time
mode with main power source (primary) switch ON and main
unit power (secondary) switch OFF. Following the interval of
the reception confirmation cycle, it allows reception of the data
from a POP server (if there are any) and launch the main unit
for output. (It cannot attain the pseudo night-time mode if the
main power source (primary) switch is off. In this case, this
function is not supported.)
*2: This function saves all received data in memory and starts out
put after password entry. (Confidential reception is excluded.)
Setting only on the reciver side.
Shortcut for address
selection (quick
key)
Use the 10-key to call up registered numbers of
addresses.
CC/BCC sending Yes ---
Subjet Selective/direct entry from the list
File name Selective/direct entry from the list
Sender name Selective/direct entry
from the list/selection
from LDAP server
---
(1 default address fixed
as sender name)
Transmission
message (message
body)
Selective/direct entry from the list.
(Number of characters: Maximum of 1800 half-size
characters (888 full size characters))
Preset mail footer *2 Yes
Disable direct entry
transmission *3
Yes
Disable PC- Fax
sending
Yes
Disable Internet Fax
sending
Yes
Mode Scanner Internet Fax
Broadcast Yes (500 destinations)
(e-mail/FTP/Desktop
allowed)
Yes (500 destinations)
Scanner Internet Fax
Memory transmission 94 destinations in all
Rotated transmission --- Yes
Scaled transmission Yes
Enlargement/reduction is allowed only from a
fixed size to another. Reduction may be done
on the receiver side with Fax/Internet Fax
sending.
Recall mode Error --- Yes
Busy --- ---
--- Number/time to be
set up through
system setup
Long original
transmission
Yes
Maximum of 800mm (single side only/black-
white 2 values only)
Change of the number
of pages for each file
Yes ---
Job partition through
recognition of white
paper.
No ---
Restriction on
transmission size
Yes ---
Large capacity original
mode
Yes
Scanning of thin paper Yes
Mixed originals feeder Yes (Random + MIX)
Default date sender
transmission
--- Yes (ON only)
Mode Scanner Internet Fax
Scanner Internet Fax
Automatic reception --- Yes
Manual reception --- Yes
Memory reception --- Yes
Fixed size reduced
reception
--- Yes
Specified size scaled
reception
--- No
Rotated reception --- Yes
Setting of received data
print condition
--- No
2-sided reception --- Condition setting
through system setting
2-in-1 reception --- No
Automatic reduction
setting upon receiving
A3
--- Yes
Automatic reduction
setting upon receiving
letter
--- Yes
Address/Domain-
specified reception
allowed
--- Yes (50 domains)
Address/Domain-
specified reception not
allowed. (To be rejected)
--- Yes (50 domains)
Received data bypass
output
--- Yes
Reception confirmation
cycle setting
--- Setting by 0-8 hours/
each minute
POP3 communications
timeout setting
--- Setting by 30-300/every
30 seconds
Index printing --- No
Body text print select
setting
--- Yes
Transfer function upon
disabling of output.
--- Yes (1 receiver (of
transfer) registration)
Internet Fax/Fax to e-
mail (Transfer of Internet
Fax/Fax reception data
to e-mail, inbound
routing)
--- Yes
Exit tray setting --- Yes
Insertion of job
separator sheet
--- No
Staple function of
received data
--- Yes
Auto wake up print *1 --- Yes
Received data print hold
*2
--- Yes
Color toner print when
black toner runs out.
--- No
Fax response lamp --- Yes

MX-2300/2700 N/G SPECIFICATIONS 2 – 9
h. Report/list function
i. Other Functions
* This function means that e-mail address setteing on F code relay
broadcast allowed.
j. Record size
k. Registration-related settings
*1: Since scan/Internet Fax/Fax uses the common address book,
the number of addresses allowed for registration is the sum
total of all modes.
*2: The network scanner expansion kit (MX-NSX1) required
(G model).
*3: The book for address selection is used when a scan sender is
selected.
*4: Quick key is the function to select an address based on the
registered number of each address within the book for address
selection. Users should be able to select a quick key number.
l. Sound settings
*1: Large/middle/small. Setup by system setting.
*2: Large/middle/small/no sound. Setup by system setting.
m. Others
C. PC-Fax functions
(1) PC-Fax/PC-Internet Fax operating environment
Scanner Internet Fax
Image sending activity
report
Yes
Time-specified output
Output with memory full
* Maximum of 200 times including both
transmission and reception
Transaction report Yes
Address/phone number
table
Yes
Group table Yes
Program table Yes
Communication original
contents print
--- Always print/Upon
error/no print
List of addresses
allowed or not allowed
for reception
--- Yes
Scanner Internet Fax
Time specification Yes
Sender print --- Yes
Page number print --- Yes
Date print --- Yes (Date can be
expressed
alternatively)
Page partition
transmission
Yes
Page connection No
Edge erase Yes
Center erase Yes
2 in 1 No
(Allowed for Fax /
Internet Fax
broadcast)
Yes
Background removal Yes
(Only color and gray
scale)
---
Card shot Yes (Equivalent or enlargement up to the paper
width. The maximum enlargement is not
allowed to exceed 400%)
Confirm transmission --- Yes
Timeout time Setting
for 1 minute – 240
hours/each minute
Forward data
transmission/reception
(Document Admin)
Yes
Data transmission by PC-Fax/PC-Internet Fax
is allowed, too.
Mode Scanner Internet Fax
Maximum record width --- 293mm / 11-17/32
Record size --- A3 – A5/11 x 17 – 5.5 x 8.5
Mode Scanner Internet Fax
One-touch/group *1
E-mail
FTP
Desktop
SMB
Internet Fax
999 destinations
Use of LDAP allowed
Up to 500 registered addresses for each group
dial.
Registered name in 18 full-size character (36
half-size characters)
Default address setup Yes ---
Desktop registration Yes
Registration by using
Web or NST (network
scanner tool) *2
---
Program Registration of addresses (groups), settings
(density, image quality) and special functions in
one set is allowed. (48 of them)
Sender registration 200 (user registration
from Web) *3
---
Number of sender
registration
--- 1 (20 characters)
Quick key (short cut
registration) *4
Yes (001 – 999)
Retrieving/scanning of
registered data to other
model
Yes (By address book conversion utility)
Import/export of address
book
Yes (By storage backup)
Mode Item Scanner Internet Fax
Reception sound Sound volume setting --- Yes *1
Communication
error sound
Sound volume setting --- Yes *2
Sound setting for
end of original
reading (image
send)
Sound volume setting Yes *1
Mode Scanner Internet FAX
PC-Internet Fax --- Yes
Trial mode Yes No
OS Windows 98 (IE4.0 or more)
Windows Me (IE4.0 or more)
Windows NT4.0 Workstation (Service Pack5,
IE4.0 or more)
Windows 2000 (IE4.0 or more)
Windows XP Home Edition (IE4.0 or more)
Windows XP Professional (IE4.0 or more)
Windows Server 2003 (IE4.0 or more)
PC IBM PC/AT compatible machine
CPU Pentium II 300MHz or more
Monitor 640x480 Pixels or more of screen resolution
256 or more of colors
Memory 64MB or more
HDD Free space of 50MB or more
Interface USB2.0
10/100BASE-TX
Communications
protocol
LPR/lp
Port9100(RAW)
IPP
USB2.0
Mode Scanner Internet Fax

MX-2300/2700 N/G SPECIFICATIONS 2 – 10
(2) PC-Fax/PC-Internet Fax functions
D. Remote PC Functions (Network TWAIN)
Pull scan (TWAIN) specification
E. Printer function
(1) Platform
(2) Support OS
(3) Command system
(4) Installed fonts
PC-Fax Send Yes (with Fax equipped)
Maximim of 64 digits for Fax number (including
sub-address and passcode)
PC-Internet Fax Send Yes (Necessary options: 256MB expansion
memory (G model), Internet Fax expansion kit)
Maximum of 64 digits for Internet Fax address
Resolution 200 x 100dpi/200 x 200dpi
/200 x 400dpi/400 x 400dpi
Transmission original
sizes
A3/B4/A4/A5/B5/11 x 17/8.5 x 14/8.5 x 11/5.5 x
8.5/8.5 x 13/8K/16K
Compression method MH/MMR
Braodcast transmission Yes (Fax, Internet Fax mixture possible.
Maximum of 500)
F code transmission Yes Sub-
address
Yes Maximum of
20 digits
Passcode Yes Maximum of
20 digits
Phone book
registration/
transmission function
Yes
Use of MFP phone book No
Attach a cover sheet Yes (Not allowed for bradcast transmission)
Create cover sheets
function
Yes
Sender print Yes (Editable by PC-Fax driver for only Japan.
Always printed for abroad.)
Preview function Yes
Transmission
confirmation (Notice to
PC by NJR)
Yes
Document filing function Filing Yes
Quick File Yes
PC-Fax Transmission
log
Yes (Re-transmission not allowed)
User authentication Yes
Timer No
R-KEY (SEEG/SEF
only)
Yes
Interfaces NIC Yes
USB No
OS's Windows 98/Me/2000/XP/2003 Server
WHQL validated OS's Windows 2000/XP
Hardware environment System: Must satisfy the operational conditions
for each OS.
HDD: 10MB or more: 100MB or more
recommended.
Monitor: 800 x 600 dots or more; 256 or more of
colors must be available.
Other: Network port
2-sided scan Yes
Color modes Mono 2 gradation/Mono Diffusion/Grayscale/Full
Color
Resolutions 75dpi/100dpi/150dpi/200dpi/300dpi/400dpi/
600dpi or custom: 50-9600dpi
Scanning ranges A3/A4/A4-R/A5/A5-R/B4/B5/B5-R/11 x 17/
8.5 x 11/8.5 x 11-R/7.25 x 10.5/7.25 x 10.5-R/
8.5 x 13/5.5 x 8.5/5.5 x 8.5-R/8.5 x 14/Postcard/
8K/16K/16K-R/Auto/Auto(Mixed size)/Custom
* "Auto" includes the same width (Mix). "Auto
(Mixed size)" means random.
Preview function Yes
Zoom preview function Yes
Rotated scan Yes (90-degree/ 180-degree/ 270-degree)
Brightness/contrast
adjustment
Auto/ manual (-100 – +100)
Gamma adjustment Yes
Color matching None/For Printer/For CRT/For LCD/ICM
Edge emphasis None/Normal/Sharp/Blur
Black-white inversion Yes
Selection of illuminant
color
Yes (Red/Green/Blue/White)
Selection of threshold
value
Auto/ manual (1 – 254)
Addition of void area Allowed (4 sides; 2.5mm for each)
Save of setup contents Yes
Save of preview image Yes
Display unit of
scanning range
Pixel/mm/inch
Notes's security
function
Yes
Image acquision
method from the main
unit
Non-compression
• IBM PC/AT compatible machine
• Macintosh
Custom PS Windows 98/Me
Windows NT 4.0 SP5 or later
Windows 2000
Windows XP
Windows Server 2003
Custom
PCL5c/6
Windows 98/Me
Windows NT 4.0 SP5 or later
Windows 2000
Windows XP
Windows Server 2003
PPD Windows 98/Me
Windows NT 4.0 SP5 or later
Windows 2000
Windows XP
Windows Server 2003
MacOS 9.0-9.2.2, x 10.1.5, x 10.2.8, x 10.3.3 – 10.3.9,
x 10.4
SPLC-c Windows 98/Me
Windows 2000
Windows XP
Windows Server 2003
WHQL Windows 2000
Windows XP
Command system MX-2300G/2700G MX-2300N/2700N
SPLC-c Standard No
PCL5c compatible Option (Printer
expansion kit: MX-
PBX1)
Standard
PCL6 compatible
BMLinkS No
PS3 compatible Option (PS3 expansion kit: MX-PKX1)
EFI controller No
For PCL5c/
PCL6
compatible
Roman outline fonts = 80 types
Line printer font (Bitmap) = 1 type
Standard (MX-
2300N/2700N)
Option (MX-
2300G/2700G)
Bar code fonts = 28 types (Can be
provided by the flash ROM kit as well)
Option
For PS3 Roman outline fonts = 136 types Option

MX-2300/2700 N/G SPECIFICATIONS 2 – 11
(5) Print channel
(6) Command Compatibility
(7) Environmental settings
(8) Print functions
Support print
channel
• USB2.0 (high speed)
• PSERVER/RPRINT for netware environment
•LPR
•IPP
• PAP: EtherTalk (AppleTalk)
•FTP
•NetBEUI
• Raw Port (Port9100)
• HTTP (Web Submit Print)
• POP3 (E-Mail To Print)
USB USB 1.1: Windows 98/Me/2000/Server 2003/XP only
USB 2.0 (High speed): Windows 2000/XP only
PSERVER/
RPRINT for
NetWare
environment
Print channel in PSERVER/PRINT mode to be used
in netware environment
LPR UNIX LPR/LPD command-compatible print channel
IPP Print channel in compliance with IPP1.0
PAP:
EtherTalk
(AppleTalk)
Print channel to be used for Machintosh environment
FTP Equipped with the function to print data received via
built-in FTP server
NetBEUI Microsoft NetBEUI compatible print channel
Port9100 9100 TCP port (Raw Port) supported
PCL5c
compatibility
PCL5c must be compatible with HP Color Laser Jet
4600.
PCL XL
compatibility
PCL XL must be compatible with HP Color Laser Jet
4600.
PostScript
compatibility
Must be compatible with Adobe PS3.
Setting item Overview
Initial setting Basic settings for printer use such as number of
copies or printing direction.
PCL seting Setting of PCL symbols and fonts
PS setting Whether or not printing is allowed upon PS error is to
be set up.
Function Content
PCL6/5c
(G model:
option)
PS (Option) SPLC-c
(G model)
Multiple Pamphlet Binds multiple pamphlet outputs into a single booklet. Yes Yes No
Bar code font JetCAPS BarDIMM emulation Yes No No
Network tandem print Two units connected via network can be used simultaneously for a printout. Yes Yes (Windows
only)
No
Encryption PDF/PDF/
TIFF/JPEG direct print
PDF/TIFF/JPEG file can be printed without printer driver.
1) Printing of e-mail attachment file
2) Printing from FTP server
3) Printing from setup file on Web page
4) USB memory
Yes ( No f or
encrypted
PDF/PDF)
Yes No
E-Mail To Print Direct printing of an attached file upon receipt of the e-mail. Yes Yes No
Pull print from front panel Browsing of FTP server from front panel and pull-printing of a specified file (direct
printing).
Yes Yes No
Print by file setup on Web
page [Web Submit Print]
Setting and direct printing of a file on network through Web page. Yes Yes No
Continuous print function The function executes multiple print jobs continuously as if they are one single job
even if the unit receives an end of job command, in order to support print from the
application assuming printout on continuous pages.
Yes Yes No
ROPM The function enables the printout of a multiple number of copies in one RIP
processing.
Yes Yes Yes
Multi-access RIP processing must be allowed during printing. Printing must also be allowed
during scanning.
Yes Yes Yes
Paper direction setting for
2-sided printing of
letterhead paper and pre-
punched paper.
Pages with front-back attribute such letterhead or punch paper are to be printed
correctly in front-back page order for 2-sided printing.
Yes Yes Yes
Enable selected paper
type in bypass tray
For setting of bypass tray, even if the setup values on the main unit side do not
match with those on the driver side, the printing will be executed in the setting of
the driver regardless of the setup values on the main unit side.
Yes Yes Yes
Setting environmental
control under terminal
server control
Print setting of each client is memorized under meta frame environment (auto print
create environment). (Setup for each log-in can be skipped.)
Yes Yes Yes
Driver delivery function PAU4.0 allows the administrator to deliver a driver to clients. Yes Yes Yes
Form overlay The function downloads a form to the main unit beforehand, sends the contained
data only, and inserts the data into the form in the main unit for printout.
Yes
(5c only)
No No
Planet Press Object Lune Corporation's Planet Press (Software to execute the mapping of forms
(DL beforehand) and variable data in the printer interior)
Yes Yes No
Improvement of
downloading method of
font form
This expands the function to prevent the deletion and overwriting of the editing
functional enhancement font/form on Web page. A unified UI for the lineup is
necessary.
Currently, registration is done by Web page and deleted by PJL. This function is
supported by HDD.
Yes
(5c only)
Yes No
Management of password
by hidden Web page
The purpose is to prevent the access even if the hidden Web page address
becomes known.
Yes Yes Yes
Expansion font list In self-print of a font list, ESC command information is needed for BITMAP font. Yes
(5c only)
No No

MX-2300/2700 N/G SPECIFICATIONS 2 – 12
(9) Windows driver function
PCL5-c/6: N mode standard, G model option (Installation of the
printer expansion kit (MX-PBX1) and expansion of memory
(256MB) are required.)
PS: Option (Installation of the printer expansion kit (MX-PBX1) and
the PS3 expansion kit (MX-PKX1) and expansion of memory
(256MB) are required.)
SPLC-c: G model only
a. Frequently used functions
b. Paper feed system
c. Paper exit method
Bonjour for Macintosh
environment
This technology detects and connects peripheral equipment on the network
automatically.
The dynamic network connection (computer, peripheral equipment and software) is
possible without user setting.
No Yes No
Document control When printing, the unique pattern for prevention against unauthorized copy
is embedded in printing.
Yes(OPT)Yes(OPT)Yes(OPT)
Object judgement (screen
change/color change)
In the printer color mode output, object of image data (area of photograph/graphic
text) is judged. Print screen (resolution) and profile (color) are changed
automatically.
PCL6: Yes
PCL5: No
Yes No
CMYK Simulation Choice of CMYK simulation is as follows.
1) Default
2) Custom
Default is defined depending on the destination of service simulation.
1. Japan = Japan Color
2. North America / China / Other abroad inch type = SWOP
3. Europe / Other abroad AB type = Euroscale
Custom profile can upload by Web setting. Notation of driver is Custom.
Example: Use SWOP profile in Japan.
No Yes No
ICC Profile <Source Profile>
Choice of source profile is as follows.
•sRGB
• AppleRGB
•Custom
Custom profile can upload by Web setting. (The attached ICC profile on devices is
available.)
<Output Profile>
There is no user selection for output profile. Sharp provides Custom profile. Upload
of profile supports by service. The tool is set on the Web (service setting). The
concrete method of profile making is to be considered separately.
Yes Yes No
Pantone color For Pantone color support, the profile upload can be made by Web setting. No Yes No
Function Content
PCL6/5c
(G model:
option)
PS (Option) SPLC-c
(G model)
Function PCL5-c/6 PS SPLC-c PPD
Copies (Copy
processing by
MFP/Printer
firmware)
1-999
Orientation Portrait/Landscape
Duplex 2-Sided (Book)
2-Sided (Tablet)
Pamphlet
(Pamphlet
processing by
MFP/Printer
firmware)
2-Up Pamphlet N/A
Tiled Pamphlet
Multiple 2-Up
Pamphlet
N/A
Multiple Tiled
Pamphlet
N/A
Binding Edge Top/Left/Right N/A
N-Up Printing 1-Up, 2-Up, 4-Up, 6-Up,
8-Up, 9-Up, 16-Up
(Windows NT: N/A)
(Windows 9x:
1-Up/2-Up/4-up)
Black N-Up
Border
Yes/No N/A
N-Up Order [2-Up]
Left to Right
Right to Left
[4, 6, 8, 9, 16-Up]
Right, and Down
Down, and Right
Left, and Down
Down, and Left
Function PCL5-c/6 PS SPLC-c PPD
Paper Size A2 (Fit To
Page)
(PCL6 only)
N/A A2 (Fit To
Page)
N/A
12 x 18, A3, A4, A5, B4, B5, 11 x 17, 8.5 x 11, 8.5 x 14,
7.25 x 10.5, 8.5 x 13, 5.5 x 8.5, 8K, 16K, DL, C5,
COM10, Monarch, Custom Paper
Paper Selection Paper Source
Paper Type
Auto
Selection/
Paper
Source /
Paper Type
Different Paper Cover Page N/A
Last Page N/A
Other Page N/A
Transparency
Inserts
Blank/Printed
Tab Printing Image Shift N/A
Tab Paper
Printing
(PCL6 only)
N/A
Set Tray Status Set Paper Size
Set Paper Type
N/A
Paper Type
Name (USER
TYPE 1-7)
Display Name N/A
Input Tray
Options
Two Trays/Three Trays/Four Trays N/A
Function PCL5-c/6 PS SPLC-c PPD
Output Tray Center Tray/Right Tray/Offset Tray/Saddle
Stitch Tray
Staple None/1-Staple/2-Staples
Punch Yes/No
No Offset Yes/No
Large Capacity Tray None/MX-LCX1
Output Tray Options None/Finisher/Saddle Stitch Finisher
Punch Module None/2 Holes/3 Holes/4 Holes/4 Holes (Wide)
Right Tray Yes/No

MX-2300/2700 N/G SPECIFICATIONS 2 – 13
d. Exposure
Function PCL5-c/6 PS SPLC-c PPD
Resolution 600 x 600dpi
300 x 300dpi
1200 x 600dpi
(monochrome only)
600 x 600dpi
600 x 600dpi
300 x 300dpi
600 x 600dpi
Color Mode Auto/Color(CMYK)/Monochrome (K only)
ICM Method (Cannot be specified
with the monochrome mode)
N/A OFF N/A OFF
System (Windows ICM). Effective only when Color Options is Custom.
Windows NT: N/A
Printer N/A Printer
N/A Driver N/A
Rendering Intent (Cannot be
specified with the monochrome
mode)
When ICM Method is anything other than Custom: Default
When ICM Method is Custom:
Perceptual matching
Relative colorimetric
Saturation matching
Absolute colorimetric
Perceptual matching
Relative colorimetric
Saturation matching
Absolute colorimetric
ICC Profile Selection (Cannot be
specified with the monochrome
mode)
Source Profile (Monitor Profile)
When Windows ICM is off:
None
sRGB
Apple RGB
Custom
When Windows ICM is on:
Monitor Profile installed in PC
When Windows ICM is off:
None
sRGB
Apple RBG
Source Profile (Monitor
Profile)
sRGB
Apple RGB
Custom
Print Priority (Cannot be specified
with the monochrome mode)
1 bit or 2 bit 1bit only 1 bit or 2 bit
2 bit or 4 bit N/A 2 bit or 4 bit
Contrast
* Some OS may not allow one-
number-to-next specification for
setup values.
0-100 N/A
Brightness
* Some OS may not allow one-
number-to-next specification for
setup values.
0-100 N/A
Saturation (Cannot be specified
with the monochrome mode)
* Some OS may not allow one-
number-to-next specification for
setup values.
0-100 N/A
Color Balance (RGB)
(Cannot be specified with the
monochrome mode)
* Some OS may not allow one-
number-to-next specification for
setup values.
0-100 N/A
Text To Black (Can be specified only
with the monochrome mode)
Yes/No N/A
Vector To Black (Can be specified
only with the monochrome mode)
Yes/No N/A
Toner Save (1bit only) Yes/No N/A Yes/No
Screen Setting (Cannot be specified
with the monochrome mode)
Default
Photo
Text & Graphic
Pure Black Print (Cannot be
specified with the monochrome
mode)
N/A Yes/No N/A Yes/No
Black Overprint (Cannot be
specified with the monochrome
mode)
N/A Yes/No N/A Yes/No
CMYK Simulation (Cannot be
specified with the monochrome
mode)
N/A Yes/No
In case of Yes:
Default /Custom
N/A Off/
Default/Custom
Bitmap Compression None
(PCL6 only)
None N/A N/A
Image Type Standard/Graphics/Photo/Custom
CAD N/A CAD
Neutral Grays (Cannot be specified
with the monochrome mode)
Black Only
4-Color
N/A Black Only
4-Color