Showven Sparkular User manual

V1.0
SPARKULAR Portable Pack
USER MANUAL
Showven Technologies Co.,Ltd.

SPARKULAR Portable Pack
User Manual
Please read this manual carefully before operating the product.
1-1 Safety precautions
》Unauthorized repair are prohibited, it may cause serious incident.
》Keep SPARKULAR Portable Pack dry and do NOT use in rain or snow.
》If not used in 3 consecutive months, Please remember to recharge it.
》Frequent over discharge can cause the battery to fail. To prevent battery over discharge please
maintain a certain amount of electricity and remember to charging it timely after use.
Features：
》Easy operation.
》Charge/Discharge mode automatic switchover.
》Smart design, ensure SPARKULAR to get rid of dependence on power supply, achieve real wire
less.
Interface:
1. Two AC interface: compatible with stage effects plugs, It can also realize cascade charge and use
with power link cables.
2. One AC output for connection of SPARKULAR/SPARKULAR mini.
3. One 5V DC output for wireless DMX.
4. LCD screen shows the voltage of battery, which indicate the electricity quantity.
SPARKULAR Portable Pack SP0520/SP0521
Support Model
Dimension
Weight
Input
Output
Temp
Casing Material
Battery Capacity
Interface
7.5 kg
100-240VAC, 50/60Hz, 700W
220VAC (SP0520) 110VAC (SP0521) , 500W
-10℃~ 50 ℃
Iron
24 V10 AH
Double AC power interfaces
266×235×130 mm
SPARKULAR mini, SPARKULAR
1

Charging:
When connect with AC, SPARKULAR Portable Pack will automatically switch to charging mode, it
takes 4h to be fully charged, when voltage on LCD screen reached 29.4V, means it is fully charged.
When charging, Sparkular/Sparkular mini can be used normally, it will not consume the power from
battery.
UPS ON-OFF should on OFF status when charging.
Usage:
When use SPARKULAR/SPARKULAR mini on it (not connect AC), please turn on UPS ON-OFF switch.
In low battery, device will alarm slightly, please recharge it.
Storage:
In storage, the SPARKULAR Portable Pack should keep some amount of power, and turn off the UPS
ON-OFF to avoid system drain battery power.
SPARKULAR mini can be used on the SPARKULAR Portable Pack directly. Due to the power limita-
tion, for SPARKULAR, please set at low power consumption mode, otherwise will cause UPS halted.
SPARKULAR set up as below:
Press “ENTER” key for 4s can enter Sparkular factory menu, press “MENU” to change interface and
find “Low Power Mode” interface as below, set it at “ON” status. If can’t find “Low Power Mode”
interface (available for software version V2.2 and above), please contact SHOWVEN service team for
software update.
2

Showven Technologies Co., Ltd
Add: BuildingB1,ChangshaECenterNo.18,XiangtaiRoad,LiuyangEconomicDevelopment
Zone,ChangshaCity,410300,HunanProvince,P.R.China.
Tel: [phone]
Web: www.showven.cn
E-mail: [email protected]