Shure MU 6042D User manual

DIS, Danish Interpretation Systems A/S, Vestre Teglgade 12, DK-2450 Copenhagen SV, Denmark, Tel.: [phone], Fax: [phone], e-mail: [email protected]
The MU 6042D is a fully digital DSP
microprocessor based microphone unit
designed for use together with DIS
standard/custom-made series of front
plates.
The MU 6042D is designed for instal-
lation inside the conference furniture,
below tables or inside floor boxes where
space is limited.
The MU 6042D is automatically recog-
nized and receives two unique addresses
in the system, one for each delegate.
Besides this, a connected PC running SW
6000 will recognize both delegates.
The MU 6042D is delivered in a shielded
metal mounting box.
TheMU6042D isconnectedtotheunique
DIS digital communication bus - the DCS-
LAN as any other DCS 6000 unit.
The MU 6042D features:
Connection for DIS high quality elec-
tret condenser microphones semi
gooseneck type DIS GM 44xx or hand
held type HM 4042.
All with lamp indication
Connection for DIS loudspeaker
Loudspeaker mutes when the micro-
phone is activated
Digital audio and control transmission
on STP/FTP Cat 5 cable using DIS
proprietary protocol gives unique
performance and high reliability
DCS 6000 Digital
Conference System
Conference Units
Dual Delegate Unit
MU 6042D
Data sheet no. 6.27b
Connection for front plates with
operating buttons, LED indicators,
loudspeaker and microphone.
Multiple Operating modes determined
by the DCS 6000 set-up.
FD 6012F
The front plates can feature microphone,
loudspeaker and two microphone ON/
OFF buttons, enabling two delegates to
share a microphone and loudspeaker and
each will have a microphone ON/OFF
button.
The standard front plate FD 6012 F
features gooseneck microphone, loud-
speaker and two microphone ON/OFF
buttons.
Customized front plates (dimensions,
colour, texts on button etc.) are available
on request.
FD 6012F

DIS, Danish Interpretation Systems A/S, Vestre Teglgade 12, DK-2450 Copenhagen SV, Denmark, Tel.: [phone], Fax: [phone], e-mail: [email protected]
Microphone connection:
Mic. type: DIS Electret Cardioid
HD15-Sub female socket
Switch Inputs: 2 x Microphone or
Request on/off
LED Outputs: 2 x Speak & Request
Microphone Lamp
Loudspeaker Output:
8 Ohm - 1W max.
Connections:
I/O for daisy chain connection with
digital STP/FTP Cat5 screened for
previous and next DCS 6000 series
conference units or CU 6011 Central
Unit.
Connector type: RJ-45,
screened with auto-termination
Audio section:
Freq. Response (mic. in to line out):
100 Hz - 15 kHz
THD: < 0,1%
S/N: > 90 dBA
Specifications
DCS 6000 Digital
Conference System
Conference Units
Data sheet no. 6.27a
Dimensions (WxHxD):
MU 6042D
W/o connectors: 115 x 26 x 122 mm
FD 6012F: 220 x 90 x 30 mm
Cut out = 200x80 mm (symmetrical
on vertical and horizontal axes)
Corner radius: 10 mm
Temperature Range: 5 º - 40 º C
Weight: 0,4 kg.
Power Requirements:
Supplied from CU 6011
Power Consumption:
2.5 W (typical) - inclusive
microphone and loudspeaker
Please refer to the CU 6011 User
Manual for specification of numbers
of units per chain.
Please refer to Data Sheet for CU
6011 for specifications of the DCS
6000 system.
The MU 6042D, the FD 6012F and
the DCS 6000 system conform to all
relevant standards - e.g. IEC 914, ISO
4043, ISO 2603
Dimensions
MU 6042D
How to order Conference Units: Order no.
MU 6042D,
Dual delegate unit 15 31 58342
FD 6012 FHB Dual front plate unit, mic/
loudspeaker/2 x buttons 15 12 57502
Connection Cable for DCS
6000 components:
EC 6000-0,5 EC 6000-10
EC 6000-01 EC 6000-20
EC 6000-05 EC 6000 -50
0,5 m - 50 m. cables
FD 6012F
Data subject to change without notice in interest of
product improvements