
806951A01
s
Lug Mounting Assembly
Adaptador de Montaje de Borne
Adapteur Support de Crochets
1 / 7
Installation Instructions / Instructivo de Instalación
For Use With Frame PG, Types: NPG, HPG
Para Usar Con Caja Base PG, Tipo: NPG, HPG
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before powersupplying this deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement depouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before powersupplying this deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement depouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
3VL9800-4EB01
Item: LMAP1600
U.S. Cat. No. Euro Order No.
I.L. No. 806951A01
9/16”
9/16“
Ø = .41“
[ Ø = 10.5 mm ]
Ø = .28“
[ Ø = 7.0 mm ]
Cal ISO 6789
5/16“
1/4“
3/8“
8 X
4 X
LMAP1600 / 3VL9800-4EB01
5/16”– 18 X 2.25”
2 X
2 X
4 X 3/8”–16 X 1.0”
2 X 3/8”–16 X 3.0”
6 X 3/8”
6 X 3/8”
4 X
NOT suitable for use with 100% rated circuit breakers.
[ NO para uso con interruptores a 100% intensidad continua. ]
NOTE - These instructions do not purport to cover all details or variations in equipment, or to
provide for every possible contingency to be met in connection with installation, operation or
maintenance. Should further information be desired or should particular problems arise,
which are not covered sufficiently for the purchaser’s purposes, the matter should be referred
to the local Siemens sales office. The contents of this instruction manual shall not become
part of or modify any prior or existing agreement, commitment or relationship. The sales
contract contains the entire obligation of Siemens. The warranty contained in the contract
between the parties is the sole warranty of Siemens. Any statements contained herein do not
create new warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identified by ® are registered trademarks of
Siemens AG or Siemens Industry, Inc. The remaining trademarks in this publication may be
trademarks whose use by third parties for their own purposes could violate the rights of the
owner.