Siemens FIREFINDER-XLS User manual

SiemensSiemens
SiemensSiemens
Siemens IndustryIndustry
IndustryIndustry
Industry,,
,,
,Inc.Inc.
Inc.Inc.
Inc.
BuildingBuilding
BuildingBuilding
Building
TT
TT
Tecec
ecec
echnologies Dihnologies Di
hnologies Dihnologies Di
hnologies Divisionvision
visionvision
vision
P/N 315-033744-17
Installation,Operation and Maintenance Manual
FIREFINDER-XLS CONTROL PANEL

CAUTION
ALLWIRING MUST BE DONEAS DESCRIBED BELOW
TO OBTAIN SAFEAND PROPER SYSTEM OPERATION.
1. Earth ground the FireFinder-XLS enclosure properly; see the latest edition of the
National Electrical Code or CAN/ULC-S524-01 Canadian Electrical Code for
approved methods. Conduit ground is NOT adequate.
2. To wire the System in compliance with NEC Article 760, refer to the Power
Limited Wiring Instructions for the CAB1 Enclosure, P/N 315-033007, or the
CAB2-BB/CAB3-BB, P/N 315-033009, as applicable.
3. INSULATE ALL CABLE DRAIN WIRES from any conduit or earth grounded
electrical box, including those in the FireFinder-XLS enclosure.
4. Connect shield cable drain wire ONLY inside the FireFinder-XLS enclosure.
5. For wiring outside the building, refer to the FireFinder-XLS Wiring Compatibility
Guide, P/N 315-034786.
Foradditionalwiring
information, refer to this
manual or call Siemens
Industry, Inc. Technical
Support Department at
1-800-248-7976.
Copyright © 2001 - 2016, Siemens Industry, Inc.

CYBER SECURITY DISCLAIMER
Siemens products and solutions provide security functions to ensure the secure
operation of building comfort, fire safety, security management and physical security
systems. The security functions on these products and solutions are important
components of a comprehensive security concept.
It is, however, necessary to implement and maintain a comprehensive, state-of-the-
art security concept that is customized to individual security needs. Such a security
concept may result in additional site-specific preventive action to ensure that the
building comfort, fire safety, security management or physical security system for
your site are operated in a secure manner. These measures may include, but are not
limited to, separating networks, physically protecting system components, user
awareness programs, defense in depth, etc.
For additional information on building technology security and our offerings, contact
your Siemens sales or project department. We strongly recommend customers to
follow our security advisories, which provide information on the latest security
threats, patches and other mitigation measures.
http://www.siemens.com/cert/en/cert-security-advisories.htm

TABLE OF CONTENTS
CONTENTS i
1 DESCRIPTION ............................................................................................ 1-1
Introduction ................................................................................................ 1-1
Configuration .............................................................................................. 1-3
Basic System .............................................................................................. 1-4
Optional Modules ....................................................................................... 1-8
Voice System Module ...............................................................................1-12
DLC Intelligent Analog Devices ................................................................. 1-15
2 INSTALLATION ........................................................................................... 2-1
Introduction ................................................................................................ 2-1
Installation Guidelines ................................................................................ 2-1
3 OPERATION ............................................................................................... 3-1
Introduction ................................................................................................ 3-1
Normal Mode ............................................................................................. 3-2
Alert Mode ................................................................................................. 3-3
Report Mode .............................................................................................. 3-8
4 VOICE SYSTEM .......................................................................................... 4-1
Introduction ................................................................................................ 4-1
Equipment .................................................................................................. 4-1
Command Sations ...................................................................................... 4-1
System Operation ...................................................................................... 4-2
System Priorities ........................................................................................ 4-3
Operation Procedure .................................................................................. 4-4

ii CONTENTS
FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL | TABLEOF CONTENTS
Manual Operation....................................................................................... 4-4
Emergency Page ................................................................................ 4-4
Evacuation .......................................................................................... 4-9
Alert .................................................................................................. 4-10
Convenience Page ............................................................................ 4-10
Background Music ............................................................................ 4-12
Speaker Groups ................................................................................ 4-13
Audible Silence/Unsilence ................................................................ 4-13
Speaker Group Non-Silence .............................................................. 4-14
Display .............................................................................................. 4-14
Audio to Local Speaker ......................................................................4-17
Audio Volume Control ....................................................................... 4-18
Command Station Access ................................................................ 4-20
Lamp Test ......................................................................................... 4-21
Clear Manual..................................................................................... 4-21
Firefighters’Telephone System................................................................. 4-21
Phone Group .................................................................................... 4-21
Phone Page ...................................................................................... 4-22
Warden’s Page .................................................................................. 4-22
5 GLOBAL VOICE .......................................................................................... 5-1
Introduction ................................................................................................ 5-1
Equipment .................................................................................................. 5-3
Command Stations .................................................................................... 5-3
System Operation ...................................................................................... 5-3
System Priorities ........................................................................................ 5-4
Operation Procedure .................................................................................. 5-5
Manual Operation....................................................................................... 5-6
Emergency Page ................................................................................ 5-6
Evacuation ........................................................................................ 5-10

CONTENTS iii
TABLE OF CONTENTS | FIREFINDER-XLS INSTALLATION, OPERATIONAND MAINTENANCE MANUAL
Alert ................................................................................................... 5-11
Convenience Page ............................................................................ 5-12
Background Music ............................................................................ 5-13
Speaker Groups ................................................................................ 5-14
Audible Silence/Unsilence ................................................................ 5-15
Speaker Group Non-Silence .............................................................. 5-16
Display .............................................................................................. 5-16
Audio to Local Speaker ..................................................................... 5-18
Audio Volume Control ....................................................................... 5-20
Command Station Access ................................................................ 5-22
Lamp Test ......................................................................................... 5-23
Clear Manual and Global Clear Manual ............................................. 5-23
Firefighters’Telephone System................................................................. 5-24
Phone Group .................................................................................... 5-24
Warden’s Page .................................................................................. 5-24
6 GCNET AND GALACTIC VOICE........................................................... 6-1
Introduction ....................................................................................... 6-1
NCC Management Stations .............................................................. 6-2
Fire Command Centers (FCC) ........................................................... 6-2
System Operation ............................................................................. 6-3
System Priorities ............................................................................... 6-4
Operation Procedure ......................................................................... 6-5
Manual Operation at FCC .................................................................. 6-5
Emergency Page at FCC ........................................................... 6-5
Evacuation (EVAC) at FCC ........................................................ 6-6
Alert at FCC .............................................................................. 6-8
Speaker Groups at FCC ............................................................. 6-9
Audible Silence/Unsilence at FCC ............................................. 6-9
Speaker Group Non-Silence ...................................................... 6-10

iv CONTENTS
FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL | TABLEOF CONTENTS
FCC Access Control ............................................................... 6-10
FCC Lamp Test....................................................................... 6-10
Galactic Clear Manual .............................................................6-11
FCC Trouble Sounder Switch .................................................. 6-11
Virtual Logic ..........................................................................................6-11
VLIS .........................................................................................6-11
VLOS ........................................................................................6-11
7 MASS NOTIFICATION ........................................................................ 7-1
APPENDIX
A Alarm Verification ..................................................................... Appendix 1
B Application Specific Detection ................................................. Appendix 5
C Intelligent Environmental Compensation ................................. Appendix 7
D Security Point Installation ........................................................ Appendix 9
E Silent Knight Model 5129 and Compatible Alarm Communicators............
.................................................................................................Appendix 11
F Testing / Maintenance ........................................................... Appendix 13
G Trouble Messages ................................................................. Appendix 15
INDEX ...................................................................................................Index 1

1
DESCRIPTION 1-1
INTRODUCTION The FireFinder-XLS TM Control System from Siemens Industry, Inc. is a powerful intelligent
fire alarm control system with in-building mass notification capabilities. FireFinder-XLS
utilizes FirePrint—the most advanced fire detection technology in the world.
FireFinder-XLS is designed to provide the most reliable life safety and property protec-
tion at the lowest system life cycle cost available anywhere. FireFinder-XLS has been
architected to be easy to install, commission and operate.The FireFinder-XLS System is
totally modular to satisfy any size building’s fire alarm and mass notification needs.
A basic FireFinder-XLS control system consists of a PMI, a PMI-2, or a PMI-3 operator
interface and central processor, a PSC-12 power supply and battery charger, a PTB
power termination board, a DLC intelligent device loop controller or MLC MXL line card
loop driver, and ZIC-4A zone indicating card.
The basic two DLC loop system can monitor up to 252 intelligent detectors and
devices; the MLC’s two circuits can each monitor up to 60 MXL intelligent field
devices and device accessories (relay bases, audible bases, and remote lamps) for a
total of 120 devices. A basic FireFinder-XLS system provides up to 12 Amps of 24VDC
power for use in driving the basic 4 notification appliance circuits.These supervised
notification appliance circuits can be software configured for a wide variety of func-
tions—such as standard NAC operation (bells, horns, chimes), strobes (synchronized or
non-synchronized), coded audibles (Temporal Code 3, Marchtime, Zone Coded, etc.),
Municipal Tie, Leased Line, Extinguishing agent releasing (HFC-227ea or Halon) or
sprinkler pre-action and deluge applications. The PMI/PMI-2/PMI-3’s large easy-to-read
VGA display simplifies system operator control.
By adding intelligent loop controller cards, a basic FireFinder-XLS system can be
expanded to support up to 2500 intelligent detectors and devices spread across a
flexible number of DLC or MLC (Fire only) loops.The system can also be expanded
by adding additional CC-5 cardcages and power supplies to support conventional
Form C relay modules, network interface cards for remote enclosure communication,
conventional detectors and devices and solid state output modules—typically for use
in driving graphic annunciators.
The FireFinder-XLS system’s operator interface is designed to make status informa-
tion presentation clear and system control functions simple to operate.Through the
use of soft function buttons on the system’s display, the user can easily “Acknowl-
edge” events, “Silence” or “Unsilence” building audibles, or “Reset” the system. The
system status presentation is structured to allow the different types of system
events (such as Alarm, Supervisory, and Trouble) to be viewed independently. Each
system event presents the user with a custom message describing the location and
the type of event (eg. manual alarm, smoke, heat or waterflow). If additional details
about the nature of the alarm report or its location are required, the user can depress
the illuminated “More Info” button. Additional text messages, device specific details
and simple graphic maps tell the user where they are in the building relative to the

1-2 DESCRIPTION
FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL | CHAPTER 1
alarm report for ease in locating the source of the alarm. For fire fighters using the
system, standard NFPA Fire Service icons are presented to alert them to the availabil-
ity of fire service equipment (stand pipe locations, sprinklers, building fire hoses, fire
hydrants, etc.). Standard HazMat icons are also presented to notify responding
officials of possible hazards or people in that area of the building. Standard NFPA 704
Hazard rating icons can also be used.
The microprocessor CPU at the heart of FireFinder-XLS rapidly processes logical
decisions based on the status of the smoke detection and other initiating devices to
control the system outputs.The object oriented software configuration tool, Zeus, is
used to configure the FireFinder-XLS system’s operation based on the customer
specified operating requirements.
The System continuously checks all software and hardware for proper operation. It
checks all System memory components, control panel electronic hardware, and the
System program. A hardware watchdog circuit is provided to ensure that System
programs are functioning properly. If a problem develops with the program or proces-
sor, the watchdog circuit places the System into a trouble condition and resets it. Each
module in the FireFinder-XLS System has its own microprocessor.To ensure reliable
operation, if the main panel’s central processing unit stops, these modules, operating
in degrade, still annunciate alarms and troubles through common lines called Any
Alarm and Any Trouble. All of the modules communicate with the main FireFinder-
XLS central processor through an RS-485 network communications system.
While FireFinder-XLS is designed for multiple applications, such as security point
monitoring, the fire alarm operation is always processed as the highest priority over
all other operating modes. The exception to this is when the XLS is configured as a
combined fire and mass notification system, in which case it can be configured to
allow fire emergency events to have priority over mass notification events or vice
versa.
The XNET and DNET networks allow connection of multiple FireFinder XLS panels
into a single networked system and provide support for the optional Global Voice
system.
The GCNET (Global Control Network) may be used to connect multiple XNET/DNET
networks (each called a “Building”) into a single network. GCNET provides Galactic
Voice Control across multiple Buildings from a single point, and provides support for
galactic display of Fire events via Management Stations. GCNET is carried on a single
Multimode or Single mode optical fiber.
The XLS Voice System with a ZAC-40 amplifier, when used in conjunction with
Siemens Hi-Fidelity speakers, meets the requirement for low frequency signal tone
as described in the section for Determination of Low Frequency Signal Format, in
UL464, Standard for Audible Signal Appliance, suitable for sleeping areas as required
by NFPA 72 Chapter 18.4.5 (2013 Edition). Refer to the Compatible Notification
Appliances list, P/N 315-096363, for compatible speakers.

DESCRIPTION 1-3
CHAPTER 1 | FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL
CONFIGURATION The table below presents the minimum configuration necessary to meet NFPA 72
Local, Municipal Tie, Remote Station, Proprietary and Central Station, UL 1076, NFPA
13 and 2001, ULC S527, UL2572, and ULC S576.
MINIMUM FIREFINDER-XLS CONFIGURATIONTO MEET NFPA 72,UL1076,NFPA 13,2001, ULC S527, UL2572,AND ULC S576
eludoMnoitpircseD
ytitnauQmuminiMAPFN
ecioV dnaSU adanaC
adanaC
yrateirporPlacoLyrailixuA etomeR noitatS lartneC noitatS
9
LU
6701
01,1
ro31 1002
LU -/2752 CLU 675S CLU 725S
3-IMP/2-IMP/IMP
2
ecafretnIenihcaMnosreP11111111§1
21-CSPylppuSrewoP11111111§1
BTPdraoBnoitanimreTrewoP11111111§1
A04-PST/1-LAP/MPRecafretnIretnirPetomeR1XXX
X1XX§ X
5-CCegaCdraC11111111§1
A4-CIZ
3
draCgnitacidnIenoZ1
21
1
21
11
4
1
31
1
21
1
11
1
21
§1
21
C2/B8-CIZ /draCgnitacidnIenoZ tnemecnahnEoiduAlennahC2 1
21
1
21
XXX1
21
X1
21
§1
21
6B-PCI/PCHtnioPlortnoCtnegilletnI1
21
1
21
XXX1
21
X1
21
§1
21
CLDdraCpooLeciveD1
51
1
51
1
51
1
51
1
51
1
51
1
51
1§ 1
51
CLMdraCeniLLXM1
51
1
51
1
51
1
51
1
51
1
51
1
51
X§ 1
51
—seirettaB
7,6,5
11111111§1
1-WSTHhctiwSrepmaTXXXXX1XX§ X
C-CINdraCecafretnIkrowteNX
8
X
8
X
8
X
8
X
8
X
8
X
8
X
8
§X
8
TEN-CADTEND-draCoiduAlatigiDXXXXXXX11 X
BPLdraoBegaPlacoLXXXXXXX11 X
MVLeludoMecioVeviLXXXXXXX11 X
04-CAZdraCreifilp
mAenoZXXXXXXX1
61
1
61
X
081-MAZeludoMreifilpmAenoZXXXXXXX1
61
1
61
X
1U-5102ACF/TCADM
71
moCmralAlatigiDtnioPitluM1
41
XX1
31
1
31
XXX§ X
.ytitnauqmuminimadanaCroAPFNrehtierofnmulocnoitacifissalcmetsysotrefeR=§deriuqertoN=X
1 Only HTRI-S, HTRI-D, HTRI-R (DLC); and TRI-60, TRI-S, TRI-B6,TRI-60R,TRI-R, TRI-B6R, TRI-60D,TRI-D and TRI-B6D
(MLC) can be used as security initiating devices.
2 The PMI/PMI-2/PMI-3 must be programmed by the Zeus programming tool for all System configurations (See the
Zeus Quick Start Manual, P/N 315-033875).
3 Caution: Disarm all ZIC-4A circuits configured for Releasing Device Service prior to system maintenance.
4 One ZIC-4A circuit must be configured for alarm transmission. In addition, depending on the local authority having
jurisdiction, additional circuits may be required for Supervisory orTrouble transmission.
5 Reference the System Label, P/N 575-234411, for battery maintenance and replacement schedule.
6 The batteries available are BP-61, BTX-1, BTX-2 and BTX-3.The BP-61 is a 24V 15 AH battery.The BTX-1 batteries are
a pair of 12V, 33 AH batteries.The BTX-2 are a pair of 12V, 75 AH batteries. The BTX-3 are a pair of 12V, 100 AH
batteries. Actual battery size depends on System configuration.
7 See the PSC-12 Installation Instructions, P/N 315-033060, for Battery Calculations.
8 For multi-enclosure systems, one NIC-C is required in each enclosure.
9 For Central Station, see Appendix E.
10 UL 1076 requires a Model HTSW-1 Tamper Switch and an RPM Remote Printer Module or aTSP-40A Logging Printer.
11 Refer to the ZIC-4A Installation Instructions (P/N 315-033050) for programming.
12 At least one ZIC-4A / ZIC-8B / HCP / ICP-B6 must be installed.
13 Use either the ZIC-4A, MDACT, or FCA2015-U1 depending on the communication circuit type.
14 Refer to the MDACT Installation Instructions, P/N 315-099351, or FCA2015-U1 Installation Instructions, Document ID
A6V10334254, for compatible head-end equipment. Only required for DAC (Digital Alarm Communicator) Type Signaling.
15 One DLC or one MLC is required.
16 At least one ZAC-40/ZAM-180 must be installed.
17 The FCA2015-U1 requires the XDACT-ASSY mounting bracket, Document ID A6V10807278.

1-4 DESCRIPTION
FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL | CHAPTER 1
BASIC SYSTEM The basic FireFinder-XLS Control Panel consists of the following components:
• PMI/PMI-2/PMI-3 Person Machine Interface
• PSC-12 Power Supply and Charger
• PTB PowerTermination Board
• CC-5 Card Cage
• DLC Device Loop Card or MLC MXL Line Card (Fire only)
• HCP Intelligent Control Point (DLC) or ICP-B6 Intelligent Control Point (MLC)
• ZIC-4A or ZIC-8B Zone Indicating Card
• RPM Remote Printer Module / TSP-40A Logging Printer
(NFPA 72 Proprietary and UL 1076 configurations)
• CAB1 Enclosure
• HTSW-1 Tamper Switch (UL 1076 configuration only)
• BP-61, BTX-1, BTX-2 or BTX-3 Batteries
PMI/PMI-2/PMI-3 Interface The PMI/PMI-2/PMI-3 Person Machine Interface has the following features:
• Central processing unit (CPU)
• “Soft Function Button” operator interface
• VGA LCD display
• Touch screen and surrounding keys for menu navigation and system control
• Discrete LEDs for Alarm, Trouble, Security, and Supervisory event indication,
CPU Fail (PMI-2/PMI-3) and state of audibles
• System random-access memory (RAM)
• FLASH memory stores operating firmware and site-specific database
• Watchdog circuitry

DESCRIPTION 1-5
CHAPTER 1 | FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL
More
Info
SECURITY
ALARM SUPERVISORY TROUBLE
SILENCED
PARTIALSYSTEM
DISABLED
AUDIBLES
ON
POWER
?
+
_
....
10:32:05 04/15/01
SYSTEM STATUS: NORMAL
FireFinder-XLS
Siemens - Fire Safety
PARTIALSYSTEM
DISABLED
POWER
AUDIBLES
ON
SILENCED
CPU FAIL
ALARM SUPERVISORY SECURITY TROUBLE
MENU
ESC
More
Info+
?
PMI
PMI-2
CPU FAIL
PARTIAL
SYSTEM
DISABLED
SILENCED
AUDIBLES
ON
TROUBLESUPERVISORY
ALARM
POWER
MENU
+
More
Info
ESC
?
PMI-3
PMI/PMI-2/PMI-3 The PMI/PMI-2/PMI-3 is the primary user interface for the
FireFinder-XLS system. It includes a VGA LCD display with a
touch screen and surrounding keys used for menu navigation
and system control.There are also LEDs for indication of the
Alarm, Trouble, Security (PMI/PMI-2 only), and Supervisory
events as well as the state of the Audibles.
The PMI/PMI-2/PMI-3 display continuously updates informa-
tion about the System status. If there are more events in the
system than can be displayed on a single screen, a scroll bar
appears to the right of the event list. Pressing the up and
down navigation buttons to the right of the LCD allows the
operator to move through the list.
Along the top and bottom of the LCD are rows of four soft keys. The use of these
keys is controlled by software and backlit with a green LED which guides the opera-
tor to the next action.
On the right hand side of the LCD are four navigation
buttons. These buttons allow scrolling up or down or
entering in and out of event detail screens. Also on the
right are three function-specific buttons: one for help, one
for menu access, and one for selecting the highlighted
item on the LCD.
The PMI-1 displays four event queues (Alarm, Trouble,
Security, and Supervisory).The PMI-2/PMI-3 displays up to
nine queues, as configured in the Zeus programming tool.
When replacing a PMI-1, it is recommended to use a PMI-3 in
order to benefit from all the latest features and fixes. If more than four event queues
are required (eg. MNS1, EMG), a PMI-3 must be used.

1-6 DESCRIPTION
FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL | CHAPTER 1
PSC-12 Power Supply The PSC-12 is a high current power supply that
provides the FireFinder-XLS system with primary
regulated 24VDC. It is rated at 12A and has a built-in
charger that is capable of charging up to 100AH
batteries. It also has a microprocessor-controlled
transfer circuit that allows the PSC-12 to switch the
system power to stand-by batteries during loss or
reduction of the AC power.
The PSC-12 incorporates an 18A circuit breaker on
the battery input. It provides connection to a tamper
switch and terminal tie points for system signals.
The PSC-12 communicates directly to the PMI to report fault conditions and allows
the PMI/PMI-2/PMI-3 to query the status of the power supply. It has four program-
mable single pole double throw relays.Two relays are defaulted to activate when the
degrade ALARM bus or degrade TROUBLE bus is asserted.
CC-5 Card Cage The CC-5 provides a central point for mount-
ing up to five circuit card assemblies. If a
card requires power, it is applied through the
removable terminal block at the bottom of
the cardcage. All external devices for the
card are connected to the card through the
two removable terminal blocks at the top of
the cardcage.
CC-2 Card Cage The CC-2 provides a central point for
mounting up to two circuit card assem-
blies. If a card requires power, it is
applied through the removable terminal
block at the bottom of the cardcage. All
external devices for the card are
connected to the card through the two
removable terminal blocks at the top of
the cardcage.
DLC Device Loop Card The DLC supports one loop (two isolated parallel zones) of up to 252
FireFinder-XLS intelligent field devices as well as device accessories (relay
bases, audible bases, and remote lamps) in any combination. The DLC
initializes, operates, and maintains all devices residing on the loop and
communicates all relevant device and event information, such as alarms and
troubles, to the System CPU. The DLC allows the System polarity insensitive
devices to be connected without generating errors.
The microprocessor controls the on-board isolator to isolate either zone from
the loop if one of them is shorted. When one zone is isolated from the loop,
the other zone will still work.The on-board microprocessor provides the DLC
with the ability to function and initiate alarm conditions even if the main
FireFinder-XLS CPU fails.
Z
2
O
N
E
1
E
N
O
Z
ALARM
CLASS A OPEN
CLASS A OPEN
CLASS A RETURN
CLASS A RETURN
CLASS A OPEN
CLASS A OPEN
TROUBLE
ZONES STATUS
ZONES STATUS
SHORT
SHORT
CARD FAIL
CARD FAIL
GND FAULT
GND FAULT
HNET FAIL
RESET
RESET
POWER
DLC
ONES
TENS
HUNDREDS
HNET

DESCRIPTION 1-7
CHAPTER 1 | FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL
MLC MXL Line Card The MLC MXL line card loop driver allows MXL intelligent addressable
smoke detectors, manual stations, monitor devices, and control devices to
interface to the FireFinder-XLS System. The MLC uses two addresses on the
HNET network.The application program that is loaded into the on-board
microprocessor controls the MLC operation.
The MLC initializes, operates, and maintains all devices residing on the loop.
The MLC communicates all relevant device and event information, such as
alarms and troubles, to the System CPU. The sensitivity of any intelligent
smoke detector and the logic functions of any intelligent output devices can
be checked and adjusted from the PMI/PMI-2/PMI-3 through the MLC. All
information about the devices on the loop can be displayed on the PMI/PMI-
2/PMI-3.
The MLC supports two separate circuits. Each circuit can monitor and control up to
60 MXL intelligent field devices as well as device accessories (relay bases, audible
bases, and remote lamps) in any combination for a total of 120 devices per MLC.The
on-board microprocessor provides the MLC with the ability to function and initiate
alarm conditions even if the main FireFinder-XLS CPU fails.
PTB PowerTermination The PTB filters the power from the incoming AC
Board mains and distributes it to the PSC-12 power supply
and the optional PSX-12 power supply extender.
ZIC-4A Zone Indicating Card The Model ZIC-4A is a zone indicating card that provides notification
appliance circuits. It has 4 outputs that can be configured for Class A or
Class B and control of audible and visual notification appliances such as
horns, speakers, bells, strobes, etc. Its outputs can also be configured as
connection to Municipal Tie, Releasing Service per NFPA 13, and 2001 or
as a connection to a Leased Line remote monitoring circuit.
Each zone can be configured independently for different usages as
programmed in the Zeus tool and can be controlled automatically by
program logic or manually using the PMI.
The ZIC-4A supports synchronized and non-synchronized strobes. This
selection is available in the Zeus tool under the detail properties for each
ZIC-4A circuit. Audible synchronization across multiple ZIC-4A cards is
automatic as a part of the FireFinder-XLS operating characteristics and
strobe synchronization is done on a card basis (strobe circuits within a
ZIC card). Refer to document P/N 315-096363 for a list of strobes that
support synchronization.
ZIC-8B Zone Indicating Card The Model ZIC-8B is a zone indicating card that provides notification
appliance circuits. It has 8 outputs that can be configured as Class B only
for control of audible and visual notification appliances such as horns,
speakers, bells, strobes, etc. Each zone can be configured independently
for different usages as programmed in the Zeus tool and can be controlled
automatically by program logic or manually using the PMI/PMI-2/PMI-3.
GND FAULT
TRBL
ZONE 4 ACTIVE
TRBL
ZONE 2 ACTIVE
ZONE 1 ACTIVE
TRBL
TRBL
ZONE 3 ACTIVE
CARD FAIL
HNET FAIL
CAN FAIL
RESET
POWER
ZIC-8B
HNET/CAN
HNET/CAN
HUNDREDS
TENS
ONES
TRBL
ZONE 8 ACTIVE
TRBL
ZONE 6 ACTIVE
ZONE 5 ACTIVE
TRBL
TRBL
ZONE 7 ACTIVE
TB1TB2
P1
P4
P5
P2
P3
GND FAULT
TRBL
ZONE 4 ACTIVE
TRBL
ZONE 2 ACTIVE
ZONE 1 ACTIVE
TRBL
TRBL
ZONE 3 ACTIVE
CARD FAIL
HNET FAIL
CAN FAIL
RESET
POWER
ZIC-4A
HNET/CAN
HNET/CAN
HUNDREDS
TENS
ONES
MLC
ALARM
TROUBLE
GND FAULT
TROUBLE
EXP CIRCUITS
CARD FAIL
HNET FAIL
RESET
POWER
HNET
HUNDREDS
TENS
ONES
TROUBLE
GND FAULT
MAIN CIRCUITS
USB

1-8 DESCRIPTION
FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL | CHAPTER 1
The ZIC-8B supports synchronized and non-synchronized strobes.This selection is
available in the Zeus tool under the detail properties for each ZIC-8B circuit. Audible
synchronization across multiple ZIC-8B cards is automatic as a part of the FireFinder-XLS
operating characteristics and strobe synchronization is done on a card basis (strobe
circuits within a ZIC card). Refer to document P/N 315-096363 for a list of strobes that
support synchronization.
ZIC-2C Zone Indicating Card The Model ZIC-2C adds support for 2 channel audio to the
ZIC-8B.The ZIC-2C replaces the signal routing board that is
installed on the ZIC-8B in the factory. It mounts in the same
location as the signal routing card and utilizes the same
mounting hardware.Three 8 pin headers and one 20 pin
header are also reused with the ZIC-2C.
RPM Printer Interface The RPM Printer Interface provides a parallel port to the
FireFinder-XLS system. The RPM is compatible with the
PAL-1 printer.
TSP-40A The TSP-40A Logging Printer provides a paper record of the
activity of the system. You may install one printer for each PMI/
PMI-2/PMI-3 interface on your FireFinder-XLS System. In
addition to the TSP-40A module, the TSP-XB U-Shaped Bracket
and Front Plate (P/N 500-849949) and TSP-XC Cable Kit (P/N
500-849950) must be ordered and installed.
CAB Enclosures The FireFinder-XLS system can be housed in one of three
enclosures: CAB1, CAB2, or CAB3.The CAB1 is a single-
row enclosure that consists of a backbox, front door and
inner door that is shipped assembled. The CAB2 and
CAB3 are two-row and three-row enclosures respectively
with the backbox and doors (inner and outer) shipped
separately.
HTSW-1 Tamper Switch The HTSW-1 Tamper Switch is a three-position switch that monitors
the opening of the FireFinder-XLS enclosure and reports a security
condition. Closing the door automatically returns the switch to its
normal operating position. The switch can be pulled out to indicate a
closed position for maintenance purposes.
Batteries The BP-61 is a 24V 15 AH battery.The BP-61 is recommended
for the NFPA 72 Local and 72 Proprietary and the UL 1076
Systems. Battery size selection depends on System configura-
tion. See the Battery Calculation section of the PSC-12 Installa-
tion Instructions, P/N 315-033060, for further information.

DESCRIPTION 1-9
CHAPTER 1 | FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL
The BTX-1 batteries are a pair of 12V, 33 AH batteries that are housed in the bottom
of the CAB enclosure.The BTX-2 batteries are a pair of 12V, 75 AH batteries.The BTX-
3batteries are a pair of 12V, 100 AH batteries. Battery size selection depends on
System configuration. See the Battery Calculation section of the PSC-12 Installation
Instructions, P/N 315-033060, for further information.
OPTIONAL MODULES The modules listed below are available as options to the FireFinder-XLS system.
CDC-4 Conventional The Model CDC-4 is a card that allows conventional devices to
Detector Card be used on the FireFinder-XLS system. It provides four Class A or Class B
conventional zones. Each zone can support two-wire photoelectric or
ionization compatible smoke detectors and an unlimited number of
normally open circuit closure devices. The module also supports Siemens
Industry, Inc. flame and beam detectors. The relay base, remote lamp and
audible base may also be used with the CDC-4.The CDC-4 uses one
network address on the FireFinder-XLS system. It has diagnostic LED
indicators showing module status and the status of each zone.
CRC-6 Relay Module Each CRC-6 module provides six fully programmable relays. Each relay
contains one set of SPDT contacts rated at 4A, 30 VDC/120 VAC resistive
and 3.5A, 120 VAC (0.6 PF) inductive. All relay coils are supervised to
ensure proper operation.
Individual relays can be automatically activated or deactivated through
control by event and time based logic contained in FireFinder-XLS. Each
relay may also be either manually controlled or may be disarmed through
the PMI/PMI-2/PMI-3.
CSB CAN Sounder Board The CSB is a module that contains a sounder (buzzer) that
can be used with the SCM-8 or FCM-6 to provide audible
feedback to indicate that a switch closed properly and
communication was successful.The CSB requires no
programming.
DFM/DFM-BRK Fiber Optic The DFM-BRK provides a fiber optic interface for the Fire-
Interface/Bracket For DNET Finder XLS digital audio network (DNET) which interconnects
the DAC-NET modules. The DFM-BRK can be connected either
Style 4 or Style 7 and utilizes the Telebyte model DFM fiber
optic converter. The DFM uses 62.5/125 um fiber at distances
up to 2KM. Standard ST connectors are provided for connec-
tion of the optical fiber.
In Canada, ULC S524 requires that all interconnecting data
communications links for networks be wired DCLC (style 7)
except for dedicated network communication to annunciators.
ONES
TENS
HUNDREDS
HNET
CRC-6
RELAY 2 ACTIVE
RELAY 6 ACTIVE
RELAY 5 ACTIVE
RELAY 4 ACTIVE
RELAY 3 ACTIVE
24V FAIL
HNET FAIL
RELAY 1 ACTIVE
CARD FAIL
POWER
RESET
Buzzer

1-10 DESCRIPTION
FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL | CHAPTER 1
FCM-6 Control Module The FCM-6 contains six sets of three pushbutton switches and
their corresponding LEDs. The ON and AUTO switches both have
one bi-color (red/green) LED while the OFF switch has one bi-
color and one yellow LED. The functions of the switches and
LEDs are programmed using the ZeusTool (Refer to the Zeus
Quick Start Guide, P/N 315-033875). All LEDs can be pro-
grammed ON, OFF, or FLASHING.
HLIM Loop Isolator Module The HLIM Loop Isolator Module isolates short circuits on
FireFinder-XLS intelligent loops. By placing devices between
HLIMs during installation, a short in the wiring within that group
is disconnected from the rest of the loop.The remainder of the
devices continue to operate. The HLIM operates in both Style 6
(Class A) and Style 4 (Class B) circuits.
LCM-8 LED Control Module The LCM-8 contains eight pairs of LEDs. Each pair contains one
bi-color (red/green) and one yellow LED. The functions of the
LEDs are programmed using the ZeusTool (Refer to the Zeus
Quick Start Guide, P/N 315-033875). All LEDs can be pro-
grammed ON, OFF, or FLASHING.These LEDs are used for
system status annunciation.
MDACT Multi-Point Digital The MDACT is a multipoint serial dialer for use in FireFinder-XLS Alarm Communica-
tor systems where point identification of alarm, supervisory, status or trouble
indication is required at central stations.
XDACT (FCA2015-U1) The XDACT (FCA2015-U1) enables remote transmission of alarms and events via the
public telephone system.The module is installed next to the PMI as per the XDACT-
ASSY Installation Instructions, Document ID A6V10807278, and is controlled by the
PMI. When replacing an MDACT with a FCA2015-U1, the Zeus configuration will need
to be updated accordingly. Features include temporarily storing alarm messages,
supervision of two independent circuits, and setting of the alarm message priority.
IN-LINE1
IN-LINE2
OUT-LINE1
OUT-LINE2
TRBL
TRBL
TRBL
TRBL
TRBL TRBL

DESCRIPTION 1-11
CHAPTER 1 | FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL
MOM2-XMP
TOP OF
MOM2-XMP
MOM2-XMP The MOM2-XMP is used in CAB1, CAB2, and CAB3 enclosures
MOM2 Mounting Plate for mounting MOM-2 modules. A MOM2-XMP mounts in one
position on a CAB-MP system mounting plate.
NIC-C Network Interface The NIC-C is a card that provides HNET or XNET and CAN network
Card communication.The HNET/XNET network can be wired either Style 4 or
Style 7. For HNET one NIC-C is required in each enclosure. For XNET one
NIC-C is required per system.This NIC-C must be installed in the same
enclosure as the PMI/PMI-2/PMI-3. Each NIC-C occupies one HNET
address.The CAN network can be isolated within a given enclosure or
extended external to the enclosure. External CAN networks require either
an RNI, OCM-16 or SIM-16 in the remote enclosure. The CAN address of
the NIC-C does not need to be set.
In Canada, ULC S524 requires that all interconnecting data communica-
tions links for networks be wired DCLC (style 7) except for dedicated
network communication to annunciators.
The NIC-C supervises the network to insure proper operation. Any faults
that are detected by the NIC-C are reported to the PMI/PMI-2/PMI-3 for
annunciation. In addition, the NIC-C has diagnostic LEDs that indicate which faults
have been found. Individual LEDs are included for Loop A and Loop B faults, as well
as an LED for complete failure of the network.The NIC-C can also be configured to
perform ground fault detection on the network.
NRC Network Ring Card The NRC Network Ring card connects FireFinder-XLS panels together to form a Class
X (Style 7) ring. The NRC can also be configured for Class B (Style 4) operation in
panels where a ring is not required as an alternative to the NIC-C card.
In Canada, ULC S524 requires that all interconnecting data communica-
tions links for networks be wired DCLC (style 7) except for dedicated
network communication to annunciators.
NRC
RESET
POWER
CARD FAIL
TROUBLE
MONITOR
PORT
ETHERNET
USB

1-12 DESCRIPTION
FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL | CHAPTER 1
It provides communication between its host FireFinder-XLS panel and other
FireFinder-XLS panels and replaces the NIC-C when a ring connection is needed. One
NRC is required in each FireFinder-XLS panel. This NRC must reside in the same
enclosure as the PMI/PMI-2/PMI-3.
The NRC supervises the network to ensure the proper operation. Any faults that are
detected by the NRC are reported to the PMI/PMI-2/PMI-3 for annunciation. In
addition, the NRC has diagnostic LEDs that indicate which faults have been found.
The NRC also performs ground fault detection on its outgoing ring port. The NRC
isolates faults to the individual link in trouble. Communication continues unaffected
(Style 7 only).
In some cases, a reset at the PMI/PMI-2/PMI-3 is required to clear network troubles.
The XLS network can be wired using copper wire, single-mode fiber, multi-mode
fiber, or any combination of the three.
FN2006-U1, FN2007-U1 The FN2007-U1 multi-mode (MM) fiber network module and the
Fiber Network Module FN2006-U1 single-mode (SM) fiber network module can be used
to network FireFinder-XLS panels over large distances using
glass fiber optic cables.They are listed for use only with systems
that include NRC cards, but not NIC-C cards. Each module
mounts to a COM-BRK bracket.The COM-BRK takes up the
same space as the CC-2 card cage.
OCM-16 Output Control The OCM-16 is a remotely located, general purpose output module.
Module It provides sixteen open collector outputs to drive LEDs, incandescent
lamps, or external relays.There is an additional output for a local audible
and two inputs for momentary lamp test and local audible silence
switches.
12345678
910111213141516
17 18 19 20 21 22 23 24
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
S1
1
5
3
7
2
6
4
8
S2
TB2
TB1
P2 P3
TB3
1
5
3
7
2
6
4
8
OCM-16

DESCRIPTION 1-13
CHAPTER 1 | FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL
12345678
12345678
910111213141516
910111213141516
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
TB2
TB1
P2
S1 S2
P3
TB3
1
1
6
6
TB4
SIM-16
X
H
24 V
TB1
1
2
9
10
P1
1
4
3
64
13
6
P3 P4
TB2
RNI
TB3 TB4 TB5 TB6
2
1
JP1
P6
S1
P5
P7
OFF
ON
PSX-12 Power Supply The PSX-12 is a high current power supply extender.
Extender The power supply extender works in conjunction with the
PSC-12 power supply to provide an additional 12A of
regulated 24VDC for internal or external system use. Up to
three PSX-12 modules may be connected to one PSC-12
power supply and one set of batteries.The PSX-12 has a
microprocessor-controlled transfer circuit that allows it to
switch the system power to stand-by batteries during loss
or reduction of the AC power.
REMBOX 2/4 Remote The REMBOX2 and REMBOX4 Enclosures are used to
System Enclosure house a remote PMI/PMI-2/PMI-3 or CAN modules
(FCM/LCM/SCM/OCM/SIM). The REMBOX consists of
an outer door, an inner door, and a backbox.
The outer door and inner door are permanently hinged left.
The REMBOX has a 3/4 inch flange on all four sides of the
enclosure which is used for flush mounting applications.
The backbox is mounted on a flat surface with four
user-supplied bolts that are a maximum of ¼ inch in
diameter.
RNI Remote Network The RNI allows for the remote installation of the PMI/PMI-2/PMI-3 (on
Interface HNET) and the LCM-8/SCM-8/FCM-6/SIM-16/OCM-16 (on CAN)
modules.The HNET can be wired either Style 4 or Style 7. The RNI may
be placed in the middle or at the end of either the HNET or CAN
networks.
In Canada, ULC S524 requires that all interconnecting data communi-
cations links for networks be wired DCLC (style 7) except for dedi-
cated network communication to annunciators.
The RNI mounts in the rear of either the REMBOX2 or REMBOX4
enclosures.The RNI provides terminal blocks for all field wiring connec-
tions. Internal connections are made to plug in connectors
specifically provided for each of the installed modules.
SCM-8 Switch Control The SCM-8 contains eight switches and eight pairs of LEDs.
Each pair contains one bi-color (red/green) and one yellow
LED. The functions of the switches and LEDs are pro-
grammed using the Zeus Tool (Refer to the Zeus Quick Start
Guide, P/N 315-033875). All LEDs can be programmed ON, OFF, or
FLASHING. The SCM is used for manual control of the systems.
SIM-16 Supervised Input The SIM-16 is a remotely located, general purpose input module. It
provides sixteen input circuits for remote system monitoring. Each
input can be individually programmed as supervised (dry contacts only)
or unsupervised (general-purpose input). The SIM-16 has two Form C
relays.The relays and the inputs are programmable using the Zeus
programming tool.