Siemens FS720 Series User manual

A6V10207176_h_en_--
2016-05-23
Building Technologies
Control Products and Systems
FC724 Cerberus™PRO
Fire control panel
FS720 series, IP6
κCompact, pre-assembled, microprocessor-controlled fire control panel with
integrated operating unit for up to 504 addresses
κFire control panel can be used as a standalone version or can be networked
κUp to 64 stations – control panels and terminals – can be linked to form a
network
κIntegrated degraded mode function
κRedundant network node, degraded mode operation according to EN 54
κFast Ethernet interface for a heterogeneous network
κIntegrated user-friendly operating unit
κCan be extended by adding printer, key switches, LED indicators
κSlots for RS232 and RS485 serial interfaces
κEmergency power supply for emergency operating time of up to 72 hours
κDetection and automatic reading in (auto-configuration) of all C-NET devices,
ready for operation immediately
κProcesses signals from Cerberus PRO FD720 detector series
κFloor repeater displays, floor repeater operating units, and alarm devices on C-
NET detector line
κFlexible configuration of complex applications and controls
κConfiguration data can be uploaded/downloaded via remote access
κFirmware for all processor-controlled control panel components can be
updated

2
Building Technologies
Fire Safety
A6V10207176_h_en_--
2016-05-23
System overview
FC10 or XC10
Fire detection or
Extinguishing
control unit
collective
4 (8) loops
max. 504 addresses
C-NET
stub line
FDCI222
4 inputs
4 outputs
24VDC ext.
possible
FDCL221
FDCIO222
FDM22x
FDM221
FDS221/
FDS229
DBS720
OH720
HI722
HI720
OP720
4 inputs
FDCIO221
1 input
1 output
1 input
FDCI221
OH720
24VDC ext.
2 in-/outputs
optionally
Detection line collective Siemens,
Synova SynoLINE300 or
SynoLINE600
TM
FDCIO223
C
onventional
horn line
via FCI2009-A1
Transmission of an
alarm signal
Transmission of a
fault signal
Fire control panel
Fire controls
FC724
Repeater
FN2002
Cluster
(C-WEB/SAFEDLINK)
Remote access
Engineering Tool,
Operating Tool
FC724
FT724
OP720
Mimic display
FT2001-A1
DBS721 / DBS729
FT2010/FT2011
Floor repeater terminal /
Floor repeater display
Explosion-
hazard area
FDOOT271
Radio detectors
FDM273
FDCW241
FDA221/
FDA241
FDM233-Ex
OOH740-A9-Ex
FDCI723
FDCL221-Ex

3
Building Technologies
Fire Safety
A6V10207176_h_en_--
2016-05-23
Networking of several fire control panels
Up to 32 control panels and terminals can be linked to form a cluster (C-
WEB/SAFEDLINK network). If the cluster is connected to a danger management
system via BACnet, up to 16 control panels and terminals can be networked.
Siemens Danger
Management System
DL3750+
Matrix printer
RS232
FC722
FT724/FC72x
Cluster
(C-WEB/SAFEDLINK)
16 stations
In-/
Outputs
Ethernet
FC724
Repeater
FN2002

4
Building Technologies
Fire Safety
A6V10207176_h_en_--
2016-05-23
An optical Ethernet network (C-WEB/LAN) allows up to 14 clusters with up to 16
stations to be operated on one network. A maximum of 64 stations is supported in total.
You will find details of system networking in product data sheet A6V10227649.

5
Building Technologies
Fire Safety
A6V10207176_h_en_--
2016-05-23
Function features
κThe FC724 is a compact fire control panel with integrated operating unit for
processing signals from FD720 devices.
κThe control panel may be used as a standalone unit or networked.
κThe control panel and the fire detection system are custom-configured using
the Cerberus-Engineering-Tool software.
κAll detector lines are monitored for ground faults.
κCustomer texts can be adapted directly on the operating unit of the control
panel or with the Cerberus-Engineering-Tool software.
κUp to 2000 events can be retrieved from the event memory based on various
criteria.
κAutomatic summer/winter time changeover
κSiemens danger management system can be connected
Function elements
Operating unit
The following elements are available on the operating unit:
– CPU module and electronics
– Ethernet connection
– Slots for RS232 and RS485 modules and network modules (SAFEDLINK)
– Space for 'Kaba' or 'Nordic' key switch
– Space for event printer
– Peripheral data bus connection for optional LED modules
Periphery board
The following elements are available on the periphery board:
– Connection terminals for C-NET lines, remote transmission (alarm, fault), horn
output, configurable control inputs and outputs, monitored alarm and fault output,
emergency supply, power supply
– Two slots for loop extension (C-NET)
Power supply unit 150 W, emergency power supply
The power supply feeds the hardware and charges the batteries.
In the event of a power cut, the batteries provide emergency current.
Housing
A pivoting mounting plate can be fitted for the following elements above the periphery
board on the rear housing panel:
– 1x fire brigade periphery module (for Germany)
– 2x sounder modules (as an alternative to mounting on U-rail TS35)
Configuration
The FXS7212 Cerberus-Engineering-Tool allows the system to be customized.

6
Building Technologies
Fire Safety
A6V10207176_h_en_--
2016-05-23
Application ranges
The FC724 is ideal for medium-sized applications, e.g. for use in industrial plants,
regional banks, or office complexes.
Thanks to the flexible networking options, the FC724 can also be used for large-scale
sites.
Operation
Each control unit has an integrated operating unit. The control panel can also be
operated via a separate FT724 fire terminal.
You will find details and more information in product data sheet A6V10207898.

7
Building Technologies
Fire Safety
A6V10207176_h_en_--
2016-05-23
Overview of FC724 fire control panels
Housing (Comfort)
FC724-ZA FC724-ZE
Featuring 48 indicator
groups
with one red/green + one
yellow LED each
4 loops 4 loops
with power supply (150 W) with power supply (150 W)
Max. battery capacity 26
Ah
Max. battery capacity 26
Ah
Extensions External printer
FH7202-Z3 FH7203-Z3 FTO2001-A1 DL3750+
Housing (Standard) Housing (Comfort) Event printer Matrix printer (external)
430 x 398 x 183 mm 430 x 796 x 183 mm RS232 interface
Empty housing for free use
For installation in all
control panels
RS232 module must RS232 module must
be ordered separately be ordered separately
Operating accessories
E.g., for extra batteries, FCM7213-Y3 FCM7214-Y3
Operating add-on, or 48 indicator groups with 96 indicator groups with
Event printer one red/green + one
yellow LED each
one red/green + one
yellow LED each
Space for batteries
2x FA2003-A1 (7 Ah) or
2x FA2004-A1 (12 Ah)
E.g., for extra batteries,
Operating add-on, or for retrofitting for retrofitting
Event printer
Space for batteries
2x FA2003-A1 (7 Ah) or
2x FA2004-A1 (12 Ah) or
2x FA2005-A1 (17 Ah) or
2x FA2006-A1 (26 Ah)

8
Building Technologies
Fire Safety
A6V10207176_h_en_--
2016-05-23
Layout of FC724 inside housing (Comfort)
9
11
24
5
9
3
10 16
14
15
22
12
1
25 23
2
4
7
19
23
18
6
17
21
8
20
13
26
Basic equipment
Designation
Comment
1
Housing (Comfort) FH7203-Z3 Items 1-6: Basic equipment
2
Periphery board (2-loop) FCI2002-A1
3
Power supply (SV 24V-150 W) V24230-Z6-A5
4
Mains terminals on TS35 DIN rail – Space for socket, relay modules
5
Operating unit FCM72xx-xx Operating unit with CPU
6
Card cage (2 slots) FCA2008-A1 For two module bus cards
7
Space for batteries – 2x 12 V / 17…26 Ah

9
Building Technologies
Fire Safety
A6V10207176_h_en_--
2016-05-23
Extensions
Designation
Comment
8
Relay module Z3B171 Relay for fire controls
9
Event printer FTO2001-A1 For logging events
10
Key switch (Kaba) FTO2005-C1 For operating access authorization
Key switch (Nordic) FTO2006-B1
11
Mounting plate FHA2007-A1 E.g., for fire brigade periphery module
12
Loop extension (C-NET) FCI2003-A1 For extending the number of loops from two to four,
the number of addresses remains the same
13
Module bus cards
Line card (FDnet/C-NET) FCL2001-A1 For four extra C-NET lines
Line card (SynoLOOP) FCL7201-Z3 For four extra SynoLOOP lines
I/O card (programmable) FCI2008-A1 For twelve configurable inputs/outputs
I/O card (horn/monitored) FCI2009-A1 For eight monitored horn outputs
I/O card (RT) FCI2007-A1 For extra alarm and fault outputs
14
RS485 module (isolated) FCA2002-A1 For peripheral devices with RS485 interface
15
RS232 module (isolated) FCA2001-A1 For devices with an RS232 interface
16
Network module (SAFEDLINK) FN2001-A1 For networking several stations
17
Repeater (SAFEDLINK) FN2002-A1 For extending the C-WEB system bus, max. 1x
repeater (SAFEDLINK) between two stations
(mounted directly on a plane surface, on a TS35 U-
rail, or in housing FDCH221)
18
Sounder module FCA2005-A1 For splitting one conventional sounder into four
19
Battery (12 V, 17 Ah, VDS) FA2005-A1 For the emergency power supply
Battery (12 V, 26 Ah, VDS) FA2006-A1
20
Fire brigade periphery module FCI2001-D1 for Germany (FBF, FSD, ÜE, FSE, ÖA, KL)
21
19" mounting kit FHA2016-A1 For installation in 19" third-party housing
22
License key Sx FCA20xx For special functions
23
Cable kit (communication) FCA2014-A1 For flexible connections running to the modules on
the operating unit
24
Power supply kit (150 W, B) FP2005-A1 For extra power supply
25
Relay module Z3B171 Space for U-rail TS35 L=70 mm for max. 4 relay
modules
26
FM blind 2HE FHA2015-A1 for recessed mounting of housings

10
Building Technologies
Fire Safety
A6V10207176_h_en_--
2016-05-23
Technical data
Mains voltage AC 115/230 V +10/-15 %
Power supply 150 W
Operating voltage DC 21…28.4 V
Operating current Max. 5 A
Battery capacity 2x 12 V, 26 Ah
Battery monitoring Yes
Network monitoring Yes
Connectable detector series Cerberus PRO FD720 (C-NET)
Number of lines
–Loops (with loop extension) or
–Stubs
4 (8)
8 (16)
Number of addresses Max. 504
Integrated inputs/outputs
–Relay output
–RT alarm
–RT fault
–Monitored outputs
–Alarm
–Fault
–Horn
–Freely programmable inputs/outputs
1
1
1
1
2
12
Operating unit Integrated
Slots for RS232, RS485 serial ports 2
Slots for network modules 2
Slots for loop extension 2
Mounting spaces for cable kit (communication) 2
Sounder module Max. 2
Ethernet port RJ45 1
Operating temperature -8…+42 °C
Storage temperature -20…+60 °C
Air humidity (no condensation permitted) ≤95 % rel.
Dimensions (W x H x D)
–Without cover cap
–With cover cap
430 x 796 x 160 mm
430 x 796 x 183 mm
Color
–Housing
–Cover cap
~RAL 7035, light gray
~RAL 000 50 00
Protection category (IEC 60529) IP30
Approvals
–VdS
–LPCB
–FM
–DNV GL (Marine)
G209077
126bn/07
3051081
See document A6V10339425